Classic Mini DIY: Op. Bad Wolf: Oil Coolers and the Engine Go Back In

Complete kit offers all parts needed to do the job, including oil filter adapter plate with hose ports, special oil filter, hose, all fittings and hardware, plus a short 10-row cooler to fit the crowded MPi engine bay.

These L-shaped brackets are mounted upside-down to the front panel to form a shelf for the grille mounted oil cooler. Two required, sold each.

Sometimes the popular 13-row oil cooler offers too much cooling or is too large for the available space in the grille opening. This 10-row cooler may be just right. Accepts

An oil cooler will help keep your engine running cooler. The 13-row cooler was stock on 1275 Cooper S cars and is recommended for street applications on any Mini.

Experienced racers know the key to unimpeded oil flow is to have no restrictions at any point. We offer this 13-row cooler with -10AN fittings for plumbing in large-diameter oil cooler hoses.

Standard 13-row oil cooler with .50" BSP fittings, UK-made by Mocal. Black finish.

An oil cooler will help keep your engine running cooler. A 13-row cooler was standard on the Cooper S; this 16-row cooler is recommended for race/performance applications. UK-made, with standard

A compact thermostat unit to prevent over-cooling of the oil. Designed to be spliced into standard 1/2" ID oil cooler hoses.