Products 1-48 of 149
Item #: 21A2661 -
Nylon block that is held to the steering column and triggers the turn signal canceling mechanism.
9/28/2020 12:00:00 AM
Item #: 13H6900 -
Original-style metal lamp housing for boot (trunk) lids beginning with Mk3 classic Mini models.
8/20/2020 12:00:00 AM
Item #: 576105 -
This rubber boot covers the turn signal housing inside the front fender well of the classic Mini.
Item #: C16062 -
The pressure of the brake fluid activates this switch, which screws into a fitting on the front subframe at the right side.
5/22/2020 12:00:00 AM
Item #: 576986 -
Single-function socket for early turn signal lamp, as used on U.K. classic Minis with parking lamp bulb inside main headlamp.
Item #: 576985 -
Dual-function (turn indicator and parking light) for early ''beehive'' front indicator lamp, as fitted to non-UK classic Mini models.
Item #: 239 -
Tubular or ''festoon''-style lightbulb; fits Mk1-3 classic Mini interior lights and Mk3 and later license plate light.
Item #: 380 -
Dual-element light bulb, as used on U.S.-spec front turn signal and all rear brake/tail light.
Item #: GLB453 -
55-watt H3 bulb to fit driving and fog lights. Sold each.
Item #: 989 -
Small based bulb, most commonly used in Mk1 & Mk2 license plate lights. Also used in side marker lights on Canadian Minis, and other applications.
Item #: 281 -
Bulb, panel, bayonet type. Push in and twist 1/4 turn. Typically used on oil and water temp gauges.
Item #: 987 -
Panel bulb, screw-in style. Typically used on speedometer illumination and indicator lights.
Item #: GLB501A -
Amber bulb for 1986-on wing side marker lamp. 5-watt, push-in bulb
Item #: GLB501 -
Clear bulb for 1986-on wing side marker lamp and also modern headlamp units with Euro-spec pilot light. 5-watt, push-in bulb
Item #: 382 -
Front turn lamp and rear flasher, all years 1959-2000.
Item #: GLB207 -
Single element 5W bayonet-mount bulb.
Item #: GLB343 -
Single-element turn-signal light bulb in amber; for use with clear or white-colored beehive lenses.
Item #: GLB280 -
Quite possibly the smallest screw-in light bulb you'll ever see! 12V 1.5W, as found in the stalk-mounted turn signal indicator 31945 and illuminated rocker-type switches 1976-on.
9/9/2020 2:00:00 AM
Item #: MSSK035 -
Upper tail light lenses in clear with amber and red bulbs for converting the rear of a Mk4-on classic Mini to a customized clear-lens look. Includes parts for both sides.
Item #: GHF0771 -
Small spring clip to receive the mounting screw of ''beehive'' front indicator lamps. Use three (3) per lamp.
Item #: 37H7421 -
Metal bracket that clips to the headlight bucket assembly and serves as the anchor point for the chrome headlight bezel.
12/22/2020 12:00:00 AM
Item #: 31800 -
Larger of the two floor-mounted headlamp dimmer switches found on the Mini. Used on early Mk1 Minis. Wires are connected with set screws instead of spades.
11/19/2019 2:00:00 AM
Item #: 34790 -
Floor-mounted headlamp dimmer switch. This is the smaller of the two versions of this switch, but will interchange with the other switch.
8/30/2017 2:00:00 AM
Item #: S6007 -
Wipac driving lamps; chrome, all-metal body, with an attractive finish that will compliment the chrome brightwork on your classic Mini.
Item #: S6078 -
See and be seen with Wipac fog lights, projecting a wide beam to light up the sides of the road. Chrome, all metal body,
Item #: MSA1115 -
Small bracket-mounted red lamp as required by European laws to prevent rear-end collisions.
8/31/2017 12:00:00 AM
Item #: AFU3389 -
A different front turn signal was used from 1987-on, with a single-function lamp and plastic amber lens. Bulb not included.
8/6/2019 12:00:00 AM
Item #: AFU3389W -
Late-model front single function turn signal lamp assembly with stylish clear plastic lens. Lens is held on with two screws. Bulb (382) not included.
6/4/2019 2:00:00 AM
Item #: 1B9100MS -
Budget plastic version of beehive front USA-spec dual function turn indicator lamp. Install with three (3) GHF0771 clips per lamp.
10/27/2020 2:00:00 AM
Item #: 56583 -
The classic beehive front indicator lamp, with amber glass lens and 2-wire bulb socket for single-element bulb. As used on European and English-spec 1959-1985.
6/5/2019 12:00:00 AM
Item #: XBD100670 -
Front turn signal light for 1997-on MPi Rover Mini. Clear glass with amber bulb; includes new screws and base gasket.
2/12/2020 12:00:00 AM
Out of Stock
Item #: 52338 -
Complete assembly with clear glass lens and chrome retaining ring, USA specification. Dual function (parking and indicator) socket. Sold each. For version with plastic lens, see 1B9100MS. Use 3
5/4/2020 2:00:00 AM
Item #: XFH100460 -
Foam gasket to fit tail lamp lenses with integral clear reverse lenses, except for Altissimo-made units. Fits both left and right sides, two (2) per car needed; sold each.
Item #: 37H6778 -
Foam rubber lens seating gasket as used on Mk2 tail lamp. Sold each.
12/18/2020 12:00:00 AM
Item #: 54571330 -
The Mk1 tail lamps use this sponge rubber gasket between the lamp base and the body. Fits both right and left sides.
6/6/2019 12:00:00 AM
Item #: 57H5167 -
The Mini Van, Estate (Wagon) and traveller (Woody) tail lamps use this sponge rubber gasket between the lamp base and the body. Fits both right and left sides.
12/18/2020 12:00:00 AM
Item #: 54570450 -
This sponge rubber gasket fits between the lens and the tail lamp assembly on the Mk1 Mini, both right and left sides.
Item #: 14A7033 -
5/8'' diameter grommet for the holes in the later-model classic Minis' rear valance. The wire to the rear fog and/or reverse light go through these holes.
Item #: 60600427 -
Headlamp adjuster screw kit includes two (2) adjuster screws, two (2) plastic nuts, and tension spring.
Item #: 59191 -
A complete headlamp assembly, including a Wagner sealed beam headlamp bulb suitable for left-hand drive. Includes metal main fender bucket, bulb retainer hardware, hand harness.
Item #: S4699B -
These are "Quadoptic" H4 halogen headlights with European pilot light. They have chip-resistant lenses that deliver a wide, flat beam to light up the edge of the road without blinding oncoming traffic.
8/31/2017 12:00:00 AM
Item #: 500929E -
Stainless steel headlamp ring, includes retaining screw; no drain holes. Aftermarket.
Item #: 500929W -
Premium chrome over stainless steel. Has two drain holes in bottom; includes retaining screw. Made in the U.K. by Wipac; sold each.
Item #: 54528191 -
If you are replacing your headlight bucket, you likely want the metal bowl that supports the headlamp bulb itself. Sold each.
3/30/2021 2:00:00 AM
Item #: 54522342 -
Original-style metal headlamp bucket; fits all except self-leveling type. Gloss primer finish; made in the U.K
Item #: S5400 -
Plastic bucket includes chrome inner retaining ring, aim adjusting screws, inner rubber gasket and hardware. Fits 7'' round lamps.
12/17/2018 2:00:00 AM
Item #: GLB472 -
Replacement H4 Halogen bulb for Wipac Quadoptic headlamps.
9/5/2017 12:00:00 AM
Item #: SBO0249 -
All new fenders come with this ring already installed, but if yours is rusted, it can be replaced separately.