Products 1-48 of 111
Item #: PT3010A -
The finishing touch for the interior of your trunk is to replace the battery cover. Not only does it look neat and tidy, it also provides extra safety by protecting
9/14/2017 12:00:00 AM 74.9500
Item #: CK948 -
This kit contains all the brackets and mounts that were fitted on original Coopers, Wolseley Hornet and Riley Elf with boot boards fitted as standard.
9/14/2017 12:00:00 AM 84.9500
Item #: CK948A -
Boot board bracket set. For original left-hand tank, 6.6 US gallons, spare tire up to 165 size. No instructions are included, welding required.
9/14/2017 12:00:00 AM 84.9500
Item #: CK948C -
Boot board bracket set. For original left-hand tank, 9.0 US gallons, spare tire up to 165 size.
9/14/2017 12:00:00 AM 84.9500
Item #: CK948B -
Boot board bracket set. For original left-hand tank, 9.0 US gallons, when spare tire is up to 145 size.
Item #: CK953 -
Carpeted boot board that, in conjunction with the boot board bracket kit, will fit any Mini Saloon with the single, 9 gallon tank.
Item #: CK951 -
The vast majority of Minis built before 1980 had a single 5.5 gallon petrol tank fitted as standard, with the Cooper models befitting from a carpeted boot board to match the interior carpet set.
Item #: CK952 -
Mini Coopers from 1962 to 1973 had a factory option of fitting an extra petrol tank. This boot board will fit all these models as well as other saloons built before 1980 when a larger petrol tank was introduced.
Item #: PT3008 -
Fiberboard liner in black with hardware kit to cover the open frame of the Mini boot lid. Black.
Item #: S3267/8 -
Leather-faced version of Newton Commercial's "Classic 2000" bucket seat for the classic Mini.
Item #: S3265/6 -
We originally designed these seats for the early 1960's Mini Coopers, however they will fit all other Minis too!
Item #: CK973 -
Moulded carpet kit from Newton Commercial, fits Vans and Pickups with late gear change from 1973-80, either LHD or RHD. Use set CK974 for pre-rod change Vans or Pickups. Black
Item #: CK974 -
Moulded carpet kit from Newton Commercial, fits Vans and Pickups with magic wand or remote shift, as used prior to 1973. Fits either left-hand drive (LHD) or right-hand drive (RHD).
Price: See Amazon.com
Item #: SBK0236 -
In addition to the famous race and rally cars, coachbuilt conversions and highly modified saloons and commercials, Keith Mainland looks at overseas Mini and Moke production and the many factory-produced limited edition Minis.
Item #: DT3028 -
A roll of vinyl with sufficient material to do upper and lower dash rails and A-posts as was used originally on Deluxe and Cooper models of the Mini.
Item #: DT3076 -
The dash tray panel under the speedo console was redesigned in 1970, and it required these panels to lay on the floor of this panel so that the soft dash
Item #: DT3022 -
Liner fits in the dash tray, and is held in place by the speedo panels. Made of vinyl to match the interior trim color, and has a foam backing as original.
Item #: DT3021 -
Pair of speedometer trim panels to fit Mk1 Minis with the three instrument speedo binnacle set into the dash.
Item #: DT3024 -
Pair of dashboard trim panels that fit on either side of the speedometer. For 1962-1970 Minis fitted with the round binnacle with only the speedometer in the center of the dash.
Item #: DT3026 -
Pair of dashboard trim panels that fit on either side of the speedometer. For 1970-1973 Minis fitted with the oval binnacle with the three clocks in the center of the dash.
Item #: DT3047A/8A -
Universal set of lining panels to fit two-clock or three-clock instrument clusters, consisting of one large panel to fill the majority of the dash area, and a smaller one to fill the gap between the binnacle and the A-pillar.
Item #: CK970 -
Renowned Newton Commercial carpet set for the front of all Estate/Traveller models to 1973. For pre-rod change models. Moulded for an exact fit. Choose from black or
Item #: CK955 -
Carpet kit for Estates with rod change shifter. Deluxe Newton moulded carpet set with all hardware and instructions. Black, other colors by special order. Use CK972 rear
Item #: DL3021 -
Moisture barrier/membrane for Mk1 and Mk2 interior door panels. This is an aftermarket part that is based on principles used on expensive-car restorations.
Item #: DC3005 -
One of the quaint features of the Mk1-2 Mini models was the door check straps to prevent the doors from swinging too far.
Item #: DP3022 -
These fillet panels slot into the space at the front and back of the door panels on Mk1 and Mk2 Minis, holding the door panel into the door frame. Fits models 1959-1969, unless otherwise noted.
Item #: DP3023A -
High-quality painted and embossed automotive-quality fiberboard. Supplied in a standard black finish, but can easily be primed and painted alternative colors.
Item #: DP3047 -
Pair of door panels for classic 1969-75 Mini Clubman / Clubman Estate, and Mk3 1969-1973 roll-up window doors.
Item #: DP3048 -
Pair of door panels for 1976-80 classic Mini roll-up window doors.
Item #: DP3021 -
Reproduction door trim panels, as originally fitted to all UK-build Mk1 and Mk2 Mini saloons and travellers.
Item #: CK993A -
Two-piece deluxe floor mat set from Newton Commercial, for classic Minis 1959-1973.
Item #: CK991 -
Two-piece deluxe floor mat set from Newton Commercial with the official MINI wings logo. For cars 1973-2000.
Item #: CK996 -
Four-piece deluxe floor mat set from Newton Commercial, for Minis 1959-1973.
Item #: CK992 -
Four-piece deluxe floor mat set from Newton Commercial with the official MINI wings logo. For cars 1973-2000.
Item #: CK998 -
Four-piece deluxe floor mat set from Newton Commercial, for Mini Travellers 1960-73.
Item #: CK997 -
Four-piece deluxe floor mat set from Newton Commercial, for Mini Travellers 1973-1980.
Item #: SC3070 -
Front and rear seat cover kit, in one-color vinyl, to fit Mini saloons with reclining front seats with no head rests. Designed with DIY restorers in mind.
Item #: SC3073 -
Front and rear seat cover kit, in vinyl with matching cloth face, to fit Mini saloons with reclining front seats with no head rests. Designed with DIY restorers in mind.
Item #: CZH3508E -
Original-design rubber seat base diaphragm, complete with hooks. Used up to introduction of wire diaphragms, see C711, C716, and C719 for later applications. Aftermarket. Hooks available separately, see BHA5097.
Item #: SF659 -
This cushion was used on the majority of Mk1 front seats; approx. 2" thick with an extra 1" thick piece that can be glued to the front edge to give the seat cover definition and leg support.
Item #: SF660 -
Fits to the base frame of the seat frame under the seat cover skirt, softening the look of the frame and protecting the cover from damage.
Item #: HL3030 -
This original set of headlining stays are suitable for all Mini saloons built after 1970. The color-coded stays are inserted through hoops in the headlining kits. Instructions included.
Item #: HL3024 -
Mini Pickups had a one piece headlining frame with the canopy glued and stapled to it. Cream Crackle was used on early models and the light grey was used during the 1970's.
Item #: HL3005 -
Headliner canopy kit in original cream-crackle for Elf and Hornet. Includes C-post trim panels. Use HL3030 bow set, if needed.
Item #: HL3012 -
This is a one piece headlining canopy which is held place by six specials stays. These stays can be slipped through hoops already sewn into the canopy.
Item #: HL3000 -
Mini saloons of this period had a two-piece headlining frame with the canopy glued and stapled to them. Early cars had light grey material, but after 1962 all cars had the special Cream Crackle material.
Item #: HL3010 -
Mini saloons of this period had a two piece headlining frame with the canopy glued and stapled to them. Cream Crackle was the only colour used on this model.
Item #: HL3020 -
Two-piece head liner kit for 1960-1970 Mini Traveller; choose grey or cream crackle.