Products 1-37 of 37
7/12/2017 12:00:00 AM
Item #: ALA6640 -
Metal trim surround as fitted to Mk2 and later cars. Used in conjunction with switch panel ALE2960.
Item #: 14A8009 -
This is the chrome full-width finisher strip that clips to the lower dash tray edge. Use clip 14A8010 to retain.
Item #: 14A8010 -
Clip that attaches the chrome finisher strip (14A8009) to the lower dash tray edge.
Item #: ALA6621 -
Minis from Mk2-on use this padded lower dash rail. It serves two purposes; it moves the switches closer to the driver's reach, and prevents barking your shins against the dash.
Item #: BMP0201 -
Lower parcel shelf facia panel with hole for switch panel that sits between the A posts; made to fit Mk3 cars from 1970-on with soft trim molding.
4/12/2018 12:00:00 AM
Item #: JPC4594-USED -
Complete top dash assembly as fitted to late Minis. Includes swivel ash tray. Black.
Item #: 14A6675 -
Steel upper dash rail with center hole for ash tray. Has holes near the end to accept the padded upper dash, as used from 1984. Can be used on earlier Minis if the holes are filled.
Item #: DT3028 -
A roll of vinyl with sufficient material to do upper and lower dash rails and A-posts as was used originally on Deluxe and Cooper models of the Mini.
Item #: DT3076 -
The dash tray panel under the speedo console was redesigned in 1970, and it required these panels to lay on the floor of this panel so that the soft dash
Item #: DT3022 -
Liner fits in the dash tray, and is held in place by the speedo panels. Made of vinyl to match the interior trim color, and has a foam backing as original.
Item #: DT3021 -
Pair of speedometer trim panels to fit Mk1 Minis with the three instrument speedo binnacle set into the dash.
Item #: DT3024 -
Pair of dashboard trim panels that fit on either side of the speedometer. For 1962-1970 Minis fitted with the round binnacle with only the speedometer in the center of the dash.
Item #: DT3026 -
Pair of dashboard trim panels that fit on either side of the speedometer. For 1970-1973 Minis fitted with the oval binnacle with the three clocks in the center of the dash.
Item #: DT3047A/8A -
Universal set of lining panels to fit two-clock or three-clock instrument clusters, consisting of one large panel to fill the majority of the dash area, and a smaller one to fill the gap between the binnacle and the A-pillar.
Item #: DASH003 -
Burl walnut dashboard for right hand drive 1984-on Minis. High-gloss finish. Installs over existing 2-gauge cluster in front of driver, and has removable portion for installation of radio. Special order.
Item #: DASH008 -
Burl walnut dashboard for left-hand drive, 1984-on Minis. High-gloss finish. Installs over existing 3-gauge cluster, plus accepts three extra gauges in the center.
Item #: PMY470 -
Burl walnut dashboard for right hand drive 1984-on Minis. High gloss finish. Installs over existing 3-gauge cluster, plus accepts three extra gauges.
11/9/2017 12:00:00 AM
Item #: DASH005 -
Burl walnut dashboard for right-hand drive 1984-on Minis. High-gloss finish. Installs over existing 3-gauge cluster in front of driver, and has removable portion for installation of radio.
Item #: PMY474 -
Retro-look burl walnut dashboard to fit later Minis equipped with upper and lower dash pad. Accepts the earlier 3-clock gauges (not included). Suitable for left-hand or right-hand drive.
Item #: C-AJJ3330/1 -
Pair of period-correct works-type rally dash panels to fit a center-binnacle Mini. Finished in black crinkle finish.
Item #: 14A9949 -
Black finisher for Mini dash when fitted with vinyl covering. Fits over the windscreen demister duct outlets. Sold each.
Item #: 14A9949C -
Chrome finisher for Mini dash when fitted with vinyl covering. Fits over the windscreen demister duct outlets. Sold each.
Item #: JPC8632 -
Pair (left and right) of fresh air vents that pass through the dashboard, and used on 1976 and later Minis.
Item #: SBO0431 -
Sheet metal adapter panel to reduce the large switch panel opening of Mk2-on lower dash rails to allow installation of Mk1 switch panel.
Item #: SAC0122 -
An extended LHD plastic gauge pod with 80mm tachometer hole, and a special inner metal plate that holds the gauges securely
Item #: SAC0121 -
An extended RHD plastic gauge pod with 80mm tachometer hole, and a special inner metal plate that holds the gauges securely.
8/17/2018 12:00:00 AM
Item #: 14A7172 -
Chrome surround to dress up the switch panel on the Mk1 dash.
Item #: 11.71.02.01 -
Switch mounting plate for 1959-1962 Austin Seven and Morris Mini-Minor Minis. Different from the later Mk1 switch panel in that it accepts the rheostat-type heater switch instead of a cable.
Item #: 14E3386 -
Switch panel for later, 1964-1967 Mk1 Mini. Grey.
Item #: 24E7298 -
Switch panel in black as used in Mk1-on Van and Pickup with recirculating heater. Black finish. On some original cars, this was in a crackle finish, so repainting may be
12/22/2017 12:00:00 AM
Item #: 24E7299 -
This switch plate fits classic Mini Vans and Pickups 1968-1970, and screws directly to the lower dash rail.
Item #: ALE2960 -
Lower dash rail switch panel as fitted to Mk2 cars and early Mk3, when the ignition switch was found in the center. These have often been "bodged" by previous owners
Item #: 13.71.02.01 -
Switch panel for approximately 1970-1975 Mini with locking ignition switch on top of the column. Has holes for the tall rocker switches, wipers and headlights.
Item #: JPC2839 -
This switch mounting panel accepts four of the smaller rocker switches as used from about 1976-on. See FBX10012 for panel with five switches.
Item #: JPC2839-USED -
Used switch mounting panel that accepts four of the smaller rocker switches as used from about 1976-on. Actual condition may vary from shown.
Item #: FBX10012 -
Center dash switch panel in the style used from about 1976-on. With five (5) holes for small rocker/warning switches.
Item #: CZH624-USED -
Windscreen defogger/defroster vent nozzle, to spread warm air across the window. Heater hoses attach to bottom, then nozzle is screwed into the underside of the upper dash.