Gift Ideas

Purchase a Seven Gift Certificate, good towards the future purchase of parts!

Assorted upholstery and interior accent products for the classic Mini and variants

Oversize "Sports Pedal" style gas pedal cover for Mk4 classic Minis built from 1976-96; gives your car the look of the 1997-onwards Sports Pack Minis

A slightly larger size than the standard size Hopkirk pedal pad; mounts over existing pedal surface and fits all classic Minis

Get that rally look and improve your heel-and-toe technique with a Paddy Hopkirk footprint-shaped metal pad on the gas pedal. This is the official Hopkirk model, for Mk1 and Mk2

These aluminum alloy pedals will help you with spirited driving and look great, too. Grippy pattern keeps your feet in place.

Roof-mount antenna, for that "radio-controlled" look. Chrome mast and head. Adjustable rake. Long cable to reach radio. Single hole must be drilled in roof for

Radio antenna for wing (fender) mounting. Long cable to reach radio head. This is an aftermarket product that does the job of the original Rover version, but for much less.

Metal enameled badge for stick-on application. Rich colors on chrome. Size is 51mm x 29mm (approx. 2"x 1.14"). Sold each.

This badge was used on modern Minis for the bonnet, but can also be used as replacement for the boot badge. Self adhesive.

Pair of John Cooper-style bonnet stripe decals. Choose from white (MSA1120), black (MSA1121), or silver (MSA1123).

Locking boot t-handle, chrome plated, for classic Mini Mk1, Mk2, Van, and Estate (excl. Woody)

Nice reproduction boot lid hinges in chrome for a fresh look. Sold by pair only. Equivalent to BMB3600C or 8B12601.

A little flash for your engine bay! A nice stainless coil bracket to replace that dull original one. Easy and inexpensive, an ideal gift item.

Stainless steel bumper, made to Rover's 1996-on spec. Features rolled edges for safety, and also to leave a little extra clearance to fit Sports Pack fender flares.

Protect your Classic Mini Cooper from the elements with this Coverbond waterproof yet breathable car cover. Custom tailored to fit all Mini Sedans. Comes with storage bag and lock and

70mm plastic center cap to fit currently produced Mamba wheel. Will not fit original Mambas! Sold each.

Burl walnut dashboard for right hand drive 1984-on Minis. High-gloss finish. Installs over existing 2-gauge cluster in front of driver, and has removable portion for installation of radio. Special order.

Burl walnut dashboard for left-hand drive, 1984-on Minis. High-gloss finish. Installs over existing 3-gauge cluster, plus accepts three extra gauges in the center.

Burl walnut dashboard for right-hand drive 1984-on classic Minis; high gloss finish. Installs over existing 3-gauge cluster, plus accepts three extra gauges

Burl walnut dashboard for right-hand drive 1984-on Minis. High-gloss finish. Installs over existing 3-gauge cluster in front of driver, and has removable portion for installation of radio.

Retro-look burl walnut dashboard to fit later Minis equipped with upper and lower dash pad. Accepts the earlier 3-clock gauges (not included). Suitable for left-hand or right-hand drive.

Nice replacement polished stainless steel dipsticks with blue (SEN0120) or red (SEN0121) aluminum knob. Fits all A+ engines except for automatic. See also SEN0012 polished t-handle dip stick for A+

Stainless t-handle dipstick. Marked 'OIL'. A nice dress-up item. Fits A+ engines except for automatic. See also round knob A+ dipsticks SEN0120 and SEN0121.

The early boot lid t-handle was phased out in 1972, and all subsequent cars received this close fitting Mk3 boot handle. Includes both roll-up window door exterior handles and boot handle with matching locks/keys.

One of the quaint features of the Mk1-2 Mini models was the door check straps to prevent the doors from swinging too far.

A replacement door lever in polished metal to upgrade the interior from the standard plastic version. Ideal complement to SBO0430 polished window crank. Sold each.

Stainless steel door-mounted mirror that fits all classic Minis, 1980-on. Neat looking dome design captures the bullet look with a modern update.

Pair of interior door opening handles in burl walnut; complements burl walnut dash and similar interior styling accessories.

Pair of interior door pull handles in burl walnut; complements burl walnut dash and similar interior styling accessories.

High-quality, polished aluminum alloy door pull handles; much stronger than the original plastic ones.

This chrome-plated metal handle fits the hex drive of the window regulator. Rubber knob. A nice enhancement to any interior. Use chrome screw PMP0308. Sold each.

Pair of door window crank (winder) handles in burl walnut; complements burl walnut dash and similar interior styling accessories.

Plastic-covered stick-on badge with the green "Mini" logo, to fit the flat area of Rover alloy wheel center cap or winged bonnet/boot badge. 11/16" (42mm) diameter.

Seven carries a variety of round, self-adhesive logo badges for use with BG2602 and BG2702 gearshift knobs, and SAC0192 key fob. Approximately 1" across (27mm).

Wood & Pickett-style flares look smooth and sleek and will cover most 10''-12'' wheels. Molded black ABS plastic; set of four (4)

This flip-up cap conceals a locking gas cap. It is held to a Rover style, flat gas cap with set screws. Once installed it is removed along with the cap.

Two-piece deluxe floor mat set for classic Minis 1973-2000; heavy-duty nylon carpet backed with a non slip rubber backing

High quality nylon floor mat set for front and rear. Made to our pattern and specification; fits all Minis 1959-2000. Black.

High-quality nylon floor mat set for front and rear. Made to our pattern and specification; fits all Minis 1959-2000. Grey.

A pair of natural aluminum grille buttons for quick removal of the Mini grille for oil changes and servicing.

A pair of black grille buttons for quick removal of the Mini grille for oil changes and servicing. A traditional and useful Mini accessory.

A pair of chrome grille buttons for quick removal of the Mini grille for oil changes and servicing. A traditional and useful Mini accessory.

This is the black version of the straight slat Mk2-on grille. It was used on many of the special edition Minis, but can be fitted to any 1968-2000 Mini.

Handbrake handle in burl walnut; inside is rough-finished, and depending on year of car, tape may have to be used to ensure a snug fit.

This thick grip is a very nice upgrade to the stock handbrake lever and was used on many of the upgraded Minis of the 80s-90s. Genuine Rover. For a budget

The handbrake lever in the Mini doesn't offer much in the way of comfort, but this rubber grip will make it a little nicer on a cold day and looks

Kit for the early classic Mini Mk1 door handle design; includes two (2) locking early door handles plus a t-handle boot handle with matching keys