Window Cranks & Locks

Chrome screw as used on trim applications such as door handles and window cranks.

This safety upgrade will fit all roll-up window Mini variants. The door window cranks before 1982 were cheap plastic parts that were fragile and hard to use. In 1982,

This chrome-plated metal handle fits the hex drive of the window regulator. Rubber knob. A nice enhancement to any interior. Use chrome screw PMP0308. Sold each.

Plastic door window crank handle for cars up to 1982. Uses a large hex drive to attach to the window regulator. Chrome insert on knob end. Use ZKC3317 screw with

Window crank with square post for Riley Elf, MG1100 and Austin America; also fits Australian Minis with roll-up windows.

Flanged screw for door window crank CZA7109.

A complete set of all you need to replace the stock plastic hardware with all chrome metal components. These fit roll-up window UK Mk3 doors, and will enhance any

Special flanged screw to retain the updated door handle; introduced in 1982.

Stainless steel screw as used on trim applications such as license plate lamp to boot, door handles, and window cranks.

Black plastic collar between the handle and door panel upholstery. Sold each.

Round fiber washer fits under the chrome window lock boss on the outside of the glass.

Chrome button on the outside of the glass. Use with 14A7065 washer on the outside and 24A1198 gasket on the inside.

Chrome lower window channel for sliding window doors. This is drilled for engaging the window locks and for drainage into the door's metal channel.

Plastic window lock set for all 2-hole sliding windows as found on Mk1-Mk2 doors. Complete kit with all parts needed for installation.

Pozidrive screw to attach the window lock to the chrome boss.

This molded plastic seal sits under the window lock to prevent rattles and the entry of water. Fits all 4 window locks, sold each. See also MSSK015 complete

Fold-up chrome window lock for the sliding windows on the rear/side of the Mini and Clubman Estate. With plastic latch as original. Sold each.

Plastic window lock as used on Mk1 and Mk2 Minis. This type replaced the original chrome metal ones and fits the 2-hole glass. For left front glass. See MSSK015

Plastic window lock as used on Mk1 and Mk2 Minis. This type replaced the original chrome metal ones and fits the 2-hole glass. For right front glass. See MSSK015

Plastic window lock as used on Mk1 and Mk2 Minis. This type replaced the original chrome metal ones and fits the 2-hole glass. For left rear glass. See MSSK015

Plastic window lock as used on Mk1 and Mk2 Minis. This type replaced the original chrome metal ones and fits the 2-hole glass. For right rear glass. See MSSK015

This is the internal door mechanism to raise and lower roll-up windows. Left-hand side.

This is the internal door mechanism to raise and lower roll-up windows. Right-hand side.