Products 1-48 of 85
Item #: SIB320 -
OEM Smiths ammeter in 52mm size. 60-60 scale. Black.
Item #: SIB320MG -
OEM Smiths ammeter in 52mm size. 60-60 scale. Magnolia.
Item #: 8D2490 -
Chrome ash tray to fit in the rear seat pocket.
Item #: SBO0048 -
An economical alternative to the Rover box is this reproduction part. It fits well and will give good service.
Item #: 14A6499 -
This part is prone to rusting out due to battery acid. Now available as a British Motor Heritage Mini product.
Item #: 14A7827 -
Unique to the Mini Van and Pickup, this cover fits the battery that fits underneath the load floor. Kit includes cover and two straps.
Item #: 5L0877 -
The finishing touch for the interior of your boot is to replace the battery cover. Not only does it look neat and tidy, it also provides extra safety by protecting
Item #: PT3010A -
The finishing touch for the interior of your trunk is to replace the battery cover. Not only does it look neat and tidy, it also provides extra safety by protecting
Item #: HAM2457 -
Original Rover battery hold-down, attaches to j-bolts on each side of the battery and is screwed down tight to hold your battery in place. This is a very important safety product, and is often missing in Minis.
Item #: SEL0015 -
Replacement chrome bezel for the Mk1 Austin or Morris Mini oil pressure or water temperature gauges.
8/15/2017 12:00:00 AM 129.9500
Item #: SBO0664 -
Specially-shaped plastic liner covers the spare tire and prevents items from contacting the battery. For use in cars with large left-hand fuel tank and no right-hand tank.
Item #: 14A8009 -
This is the chrome full-width finisher strip that clips to the lower dash tray edge. Use clip 14A8010 to retain.
Item #: 14A8010 -
Clip that attaches the chrome finisher strip (14A8009) to the lower dash tray edge.
Item #: SIB110 -
Smiths clock in 52mm size. Black face with chrome bezel.
Item #: SIB110MG -
Genuine Smiths clock in magnolia face. 52mm size.
Item #: JPC4594-USED -
Complete top dash assembly as fitted to late Minis. Includes swivel ash tray. Black.
Item #: DASH008 -
Burl walnut dashboard for left-hand drive, 1984-on Minis. High-gloss finish. Installs over existing 3-gauge cluster, plus accepts three extra gauges in the center.
Item #: PMY470 -
Burl walnut dashboard for right hand drive 1984-on Minis. High gloss finish. Installs over existing 3-gauge cluster, plus accepts three extra gauges.
Item #: PMY474 -
Retro-look burl walnut dashboard to fit later Minis equipped with upper and lower dash pad. Accepts the earlier 3-clock gauges (not included). Suitable for left-hand or right-hand drive.
Item #: 24A1517 -
This simple trim was originally fitted the the inside lip of the Mk1 and Mk2 doors, just below the windows and above the interior door handle.
Item #: G283 -
A replacement door lever in polished metal to upgrade the interior from the standard plastic version. Ideal complement to SBO0430 polished window crank. Sold each.
6/6/2017 12:00:00 AM 119.0000
Item #: MSA0193 -
Pair of interior door opening handles in burl walnut; complements burl walnut dash and similar interior styling accessories.
Item #: 24A0664 -
Highly sought-after 24A664 interior door pull cable for Mk1 & Mk2 Mini 850, Deluxe, Traveller, Van and Pickup.
Item #: MSA0192 -
Pair of interior door pull handles in burl walnut; complements burl walnut dash and similar interior styling accessories.
Item #: MSA1132 -
High-quality, polished aluminum alloy door pull handles; much stronger than the original plastic ones.
Item #: YXX3199PA -
This safety upgrade will fit all roll-up window Mini variants. The door window cranks before 1982 were cheap plastic parts that were fragile and hard to use. In 1982,
Item #: SBO0430 -
This chrome-plated metal handle fits the hex drive of the window regulator. Rubber knob. A nice enhancement to any interior. Use chrome screw PMP0308. Sold each.
Item #: CZA7109 -
Plastic door window crank handle for cars up to 1982. Uses a large hex drive to attach to the window regulator. Chrome insert on knob end. Use ZKC3317 screw with
Item #: 34G2528 -
Window crank for MG1100 and Austin America. The original part breaks easily at the shaft hole, so keep spares available.
Item #: SEL0045 -
A 52mm combined Fahrenheit mechanical water temperature gauge and 0-100 PSI oil pressure gauge, with Smiths name on black face with original chrome v-profile bezel. Note that few Smiths temp
Item #: SEL0045MG -
A 52mm combined Fahrenheit mechanical water temperature gauge and 0-100 PSI oil pressure gauge, with Smiths name on magnolia face with original chrome v-profile bezel. Note that few Smiths temp
Item #: SIB422 -
Smiths water temperature gauge; 30-110° Celsius with 6' capillary mechanical fittings.
Item #: 13H4460 -
Original spec electrical water temp gauge as used in Mk2-on Minis. Rounded chrome bezel replaces earlier v-shaped type. Smiths marking, with C-N-H scale. Normally used with GTR0104 sending unit.
Item #: 13H4460MG -
Electrical water temp gauge as used in Mk2 on Minis. As original, but with popular magnolia face. Rounded chrome bezel. Smiths marking, with C-N-H scale.
Item #: MSA0195 -
Handbrake handle in burl walnut; inside is rough-finished, and depending on year of car, tape may have to be used to ensure a snug fit.
8/8/2017 12:00:00 AM 189.9500
Item #: 14A9815 -
The very first Minis equipped with oil pressure and water temperature gauges were the Super Deluxe and early Cooper and Cooper S. The extra gauges were added by mounting a
7/11/2017 12:00:00 AM 66.9500
Item #: 24A2702 -
This is the oval plastic gauge housing found in all Minis with 3 center-mounted gauges. It is the Mk2-on type, which is self-supporting and does not require the metal inner
Item #: LGA7548-USED -
Single gauge mounting pod. Black plastic, as used on 1970's 850 & 998 Minis. Can be used as a replacement for the very rare white plastic housing of
Item #: MSA0191 -
Interior door cappings in burl walnut; compliments similar style dashes (see PMY474 or PMY470). For use on roll-up window doors; screws to the panels just below the door and rear quarter windows. Set of four pieces.
Item #: 13H4459 -
Original 90 degree sweep Smiths gauge with 0-100 psi range. Rounded bezel, as fitted to Mk2 on cars. Black face. Requires mechanical oil pressure plumbing for installation, available separately
Item #: 13H4459MG -
Original 90-degree sweep Smiths gauge with 0-100 psi range. Rounded bezel, as fitted to Mk2 on cars. Magnolia (cream) face.
Item #: SIB521 -
A replacement mechanical oil pressure gauge with black face and white lettering. This has the angled "half-V" bezel, which is a match to the chrome bezels found on Mk1 Mini original gauges.
Item #: SIB521MG -
0-100 PSI full sweep oil pressure gauge, with magnolia face and dark lettering. This has the angled "half-V" bezel, which is a match to the chrome bezels found on Mk1 Mini original gauges.
Item #: SIB420 -
Smiths oil temperature gauge measuring in Celcius. Black face.
Item #: SIB420MG -
Smiths oil temperature gauge measuring in Celcius. Magnolia face.
Item #: 14A6564 -
Genuine Rover panel from the late production Minis. The little tab visible at the top of the photo is actually the boot catch. New old stock.
Item #: WA3027 -
Vinyl-covered trim panel to cover the rear parcel shelf, below the rear window. As original on Mk3 Minis 1970-1980.
Item #: ALA5829 -
Chrome trim on top edge of rear seat pocket. Left-hand side. Sold each.