Home > Classic Mini DIY: Radiator Removal & Replacement
Products 1-17 of 17
6/3/2019 2:00:00 AM
Item #: PCF101240 -
Original expansion tank as found on MPi Minis only; allows water to run to and from the radiator as it expands and contracts. Ref: PCF101240, PCF101241.
Item #: 12A2153 -
Lower radiator mounting bracket that bolts on top of the engine front bracket. Ref: 12A2153.
2/10/2022 12:00:00 AM
Item #: 12A2153E -
One-piece radiator shroud lower radiator mounting bracket, includes the special through-bolt. Ref: 12A2153, 12A2153E.
Item #: 22A0029 -
Lower radiator bracket as used on 998 Minis with two-piece radiator shroud. Not to be used on Cooper or Cooper S, which are fitted with vibration damper lower pulley.
4/25/2022 12:00:00 AM
Item #: SEVK009 -
Upper and lower Kevlar reinforced radiator hoses for 1275cc pre-1990 classic Minis. Ref: GRH240KEVLAR, GRH247KEVLAR.
Item #: C-GRH240/B -
Standard lower radiator hose with heater take-off, for non-fuel injected classic Mini and Mini Cooper, in long-lasting silicone. Ref: C-GRH240, C-GRH240B.
Item #: C-GRH240RED -
Standard lower radiator hose with heater take-off, for non-fuel injected classic Mini and Mini Cooper, in long-lasting red silicone. Ref: C-GRH240RED.
Item #: C-GRH245/B -
Upper radiator hose for 850 & 998 classic Minis in long-lasting silicone. Ref: C-GRH245, C-GRH245BLACK, C-GRH245RED.
Item #: ARA2768-2770 -
Faithful reproduction of the two-piece radiator shroud for Mk1, Mk2, and Mk3 classic Mini Cooper and Cooper S. Ref: ARA2768, ARA2770, RADCOWL002.
Item #: ARA2768-2769 -
Two piece radiator shroud for Mk1, Mk2, and Mk3 standard Minis, 1959-73. This includes 850 and 998 non-cooper. Faithful reproduction.
12/25/2019 2:00:00 AM
Item #: 11G0228 -
Special shouldered bolt for attaching radiator housing to upper and lower mounting brackets. Fits early 2-piece shroud only. Ref: 11G228.
Item #: ARA1117 -
Early Minis had a two-piece radiator housing with upper and lower sections. The radiator was held in place by screws that passed through the housing into the side frame of the radiator.
2/1/2023 12:00:00 AM
Item #: SCO0080 -
Radiator designed to fit without modification into Mk1 and Mk2 classic Minis that still have the metal shroud on the inner fender. Ref: C-ARA4442, SCO0080.
Item #: SCO0081 -
Heavy-duty 4-core radiator for the classic Mini; two rows of two cores are offset to allow maximum airflow and heat dissipation
Item #: ARP1106 -
This is one of the best cooling copper radiators available for the classic Mini, due to its very dense fin matrix and highly-efficient 3-core design. Recommended for race or hot-climate street Minis. Ref: ARP1106.
Item #: C-ARA4443 -
The super 2-core version of the side radiator for 1992-on SPi classic Minis with the built-in electric fan switch. Ref: C-ARA4443, GRD172.
8/14/2019 2:00:00 AM
Item #: 14A7286E -
This is the 1.5'' wide rubber seal around the radiator housing on the inner fender of Mk1, Mk2, and Mk3 classic Minis. Ref: 14A7286.