Dashboard Electrical

Quite possibly the smallest screw-in light bulb you'll ever see! 12V 1.5W, as found in the stalk-mounted turn signal indicator 31945 and illuminated rocker-type switches 1976-on.

Rocker hazard switch with six round pin connectors. Fits 1976-2000 classic Minis.

Original-style bat-handle two-position toggle switch for headlamps in Mk1 and Mk2 classic Minis.

Dashboard-mounted ignition switch with off-on-start positions for most classic Mini Mk1, Mk2, and Mk3 models. Reproduction.

Lock barrel for dash-mounted igntion switch, with two (2) keys

Instrument/gauge illumination socket and bulb; fits 1/2'' diameter installation tube. Sold each.

Instrument/gauge illumination socket and bulb. Fits 3/8'' diameter installation tube; bulb included. Sold each.

Brake warning light test switch, with illuminated window and pin connectors. As used on classic Minis from about 1976 to 2000

Rocker-type headlight switch with three spade connectors and chrome surround. This switch was used from 1969-1970 on some export market classic Minis, depending the country of origin.

Illuminated rocker switch for front fog lamps fitted to some later model classic Minis models. Six pin connectors.

Small black headlamp switch as used in later model dashboards, 1976-on. Three (3) round pin configuration.

1976 Mk4-on rear windscreen defogger switch with illuminated rocker. Pin connectors.

Simple on-off single-speed heater switch for Mk3 classic Minis from 1970 to 1996 only

Heavy-duty bat-handle on-off accessory switch to fit Mk1 and Mk2 classic Minis.

On-Off bat-handle accessory switch to fit classic Mk1 & Mk2 Minis. Use this for electric fan, auxiliary lights or other add-on.

Switch for rear-mounted fog lamp fitted to classic Minis in seleted markets starting in 1976; pin connectors.

Rocker-type headlight switch with three spade connectors, as used on 1970-75 Mk3 classic Minis; dimensions are 1-1/2'' tall x 1'' wide.

Rocker switch for the two-speed heater used in the 1997-2000 MPi (multi-point injection) classic Mini.

Rocker-type wiper switch for Mk3 one-speed wiper motor.

Bat-handle single-speed wiper switch as used on Mk1 classic Minis.

Bat handle Lucas toggle wiper switch with "off" and two "on" positions for Mk2 Minis with early switch type and two-speed wiper motor.

Rocker two-position wiper switch with black bezel. Fits Mk3.

This 1-5/8'' diameter light can be aimed at the driver for maximum visibility; typically used for a shift warning light or oil pressure light. Sending units not included.