Radiator Hoses

Good quality convoluted bypass hose, which can be compressed to fit with the head still in place. Carry a spare for that emergency road-side repair. Clamps may vary from photo.

Reinforced plain rubber hose for the water pump to cylinder head bypass.

A straight rubber hose reinforced with Kevlar fibers for strength and long life. For installations where the head has been removed. We recommend replacing this when the head gasket

The magic in any of the silicone hoses is that they can be removed and reused many times. They seem to last forever! As changing a bypass hose is not

1/2"x1/2" connector to join the heater hose to the lower radiator hose. Used on Minis up until 1989.

Plated wire clamps were used on many British cars up until the 1980s. This reproduction clamp is of high quality and will add that final touch to any restoration.

Plated wire clamps were used on many British cars up until the 80s. This reproduction clamp is of high quality and will add that final touch to any restoration.

Black silicone radiator hose kit to fit any 1275 Mini with heater up to 1989, with the control valve directly on the cylinder head. Hoses are strong, long-lasting, and are

Blue silicone radiator hose kit to fit any 1275 Mini with heater up to 1989, with the control valve directly on the cylinder head. Hoses are strong, long-lasting, and are

Upper and lower Kevlar reinforced radiator hoses for 1275cc Pre-1990 Minis. Best fitting, longest lasting hoses for the price. Get both hoses for one price.

Red silicone radiator hose kit to fit any 1275 Mini with heater up to 1989, with the control valve directly on the cylinder head. Hoses are strong, long-lasting, and are

Silicone radiator hose kit for all MPi Minis. This kit has top and bottom radiator hoses and two (2) lengths of heater hoses.

Silicone radiator hose kit for all MPi Minis. This kit has top and bottom radiator hoses in shiny red silicone that does not degrade with heat, time and environment.

Special lower radiator hose with molded extension. Fits 1990-on cars with HIF44 carb. Was formerly GRH1159, but no longer available from Unipart. Now genuine Rover only, hence the high price.

Special lower radiator hose with molded extension. Fits HIF38 only carburetor equipped cars from 1991-1994. Genuine Rover.

Lower radiator hose, extra strong, with Kevlar-reinforcing fibers. Fits carbureted Minis with aluminum pump and using a heater take-off.

This late Mini lower hose is probably one of the most complicated hoses ever made. It is a genuine Rover part and hence the high price. In stock

Lower radiator hose, fits most Minis with aluminum pump, but has no spud for heater take-off.

Standard lower radiator hose with heater take-off, for non-fuel injected Mini and Mini Cooper, in long-lasting black, blue or red silicone.

Factory lower radiator hose for single-point injection engines. These are for engines with radiator on the side of the car. Since Unipart discontinued these in Dec. 2006, they have only

Lower radiator hose for single-point injection engines in long-lasting blue silicone.

Silicone heater hose, 39" for cars with the original heater valve bolted on the cylinder head. Pre-1976 cars can use two of these lengths, commonly known as 1/2" bore heater hose. Choose black, blue, or red.

Silicone heater hose, 42" for cars with the original heater valve bolted on the cylinder head. Cars after 1976 require one of this 42" length and one C-GRH1006 39" length. Choose from back, blue, or red.

Special hose from thermostat housing to the heater valve and manifold on SPi Minis only. UK market Minis only; genuine Rover.

Upper ?-shaped radiator hose for most 1275cc heads in black silicone material for long life and easy installation. This hose will last for many years, and can be removed and

Kevlar-reinforced upper radiator hose for Clubman 1275GT, or any time a 1275 has been transplanted into one of the Clubman models.

Upper radiator hose for 1275 before 1990's Cooper. Kevlar-reinforced for extra strength and heat-resistance.

Upper radiator hose for 1275 (Or 998 with 1275 head). Long-lasting blue silicone. Now available in black as C-GRH247B.

Upper radiator hose for 1990-92 Cooper engine with HIF44 carburetor. As you can see in the photo, this hose is bigger on one end. Aftermarket manufacturer. See

Upper radiator hose for 1991-1994 cars with HIF38 carb and all SPi-injected Minis. Made of long-lasting blue silicone.

Upper radiator hose for 1991-1994 cars with HIF38 carb and all SPi-injected Minis. Aftermarket.

Upper radiator hose for 850 & 998 Mini. Standard fabric-reinforced rubber. See C-GRH245 for silicone version.

A good fitting, long-lasting upper radiator hose for 850 through 1098cc Minis. Now in Kevlar-reinforced material. May require minor trimming for your application.

Upper radiator hose for 850 & 998 Mini in long-lasting silicone. Choose from black, blue, or red.

Upper radiator hose for the 998cc Mini Clubman in durable black silicone. This has a little extra length than the standard Mini upper hose.

Upper radiator hose as used only on MPi Mini with front radiator.

Upper radiator hose as used on 1275 AH Sprite and MG Midget. Reinforced rubber hose made in the UK by Quinton Hazell.