Accessories

Assorted upholstery and interior accent products for the classic Mini and variants

Oversize "Sports Pedal" style gas pedal cover for Mk4 classic Minis built from 1976-96; gives your car the look of the 1997-onwards Sports Pack Minis

A slightly larger size than the standard size Hopkirk pedal pad; mounts over existing pedal surface and fits all classic Minis

Get that rally look and improve your heel-and-toe technique with a Paddy Hopkirk footprint-shaped metal pad on the gas pedal. This is the official Hopkirk model, for Mk1 and Mk2

These aluminum alloy pedals will help you with spirited driving and look great, too. Grippy pattern keeps your feet in place.

OEM Smiths ammeter in 52mm size. 60-60 scale. Black.

OEM Smiths ammeter in 52mm size. 60-60 scale. Magnolia.

Chrome, flat top lift-up ashtray. Fits upper dash rail of Mk1, Mk2, and Mk3 classic Minis

Chrome ash tray with hinged, open lid; fits in the rear seat pocket

This pair of rubber hooks can be used as quick release fasteners on almost anything; most often used on the classic Mini to secure tilt front-ends or removable bonnets

These lightweight rubber hooks are most commonly used to secure fiberglass boot lid or bonnet on the classic Mini

Quick-release, heavy duty bonnet pin set; includes pins, clips, finishing plates, and cable tethers so you don't lose the clips.

Original-style heavy-duty leather straps for securing the bonnet/hood of the classic Mini, in tan or black

Pair of John Cooper-style bonnet stripe decals. Choose from white (MSA1120), black (MSA1121), or silver (MSA1123).

Boot lid badge for the Mk3 Mini Cooper S. Black on genuine chrome backing.

Locking boot t-handle, chrome plated, for classic Mini Mk1, Mk2, Van, and Estate (excl. Woody)

Protect your Classic Mini Cooper from the elements with this Coverbond waterproof yet breathable car cover. Custom tailored to fit all Mini Sedans. Comes with storage bag and lock and

Smiths clock in 52mm size. Black face with chrome bezel.

Genuine Smiths clock in magnolia face. 52mm size.

Since Minis were built in both right-hand and left-hand drive versions, the windscreen cowl panel of later body shells was punched for either type of wiper configuration. Instead of filling

Dash liner made from heavy-duty PVC with a felt backing; as commonly found on the classic Mini Van and Pickup

Liner fits in the dash tray, and is held in place by the speedo panels. Made of vinyl to match the interior trim color, and has a foam backing as original

Pair of period-correct works-type rally dash panels to fit a center-binnacle Mini. Finished in black crinkle finish.

Vinyl self-adhesive sticker/decal, metallic silver. Blue "Leyland" with "ST" flag logo, over "Take care to select correct replacement ST parts". Approx. 4-5/16"x 1-3/8".

Protect your paint job from scratches make by your rings and fingernails. Polished stainless door shields fit in the dish behind the door handle. Simply loosen the exterior handle and

A replacement door lever in polished metal to upgrade the interior from the standard plastic version. Ideal complement to SBO0430 polished window crank. Sold each.

Pair of interior door opening handles in burl walnut; complements burl walnut dash and similar interior styling accessories.

Highly sought-after 24A664 interior door pull cable for Mk1 & Mk2 Mini 850, Deluxe, Traveller, Van and Pickup.

Pair of front door pocket liners, covered in a colored material to match the rest of the interior trim, unlike the U.K. models which were originally a painted board only

High-quality painted and embossed automotive-quality fiberboard. Supplied in a standard black finish, but can easily be primed and painted alternative colors.

Pair of interior door pull handles in burl walnut; complements burl walnut dash and similar interior styling accessories.

High-quality, polished aluminum alloy door pull handles; much stronger than the original plastic ones.

This safety upgrade will fit all roll-up window Mini variants. The door window cranks before 1982 were cheap plastic parts that were fragile and hard to use. In 1982,

Plastic door window crank handle for cars up to 1982. Uses a large hex drive to attach to the window regulator. Chrome insert on knob end. Use ZKC3317 screw with

Window crank with square post for Riley Elf, MG1100 and Austin America; also fits Australian Minis with roll-up windows.

Pair of door window crank (winder) handles in burl walnut; complements burl walnut dash and similar interior styling accessories.

A 52mm combined Fahrenheit mechanical water temperature gauge and 0-100 PSI oil pressure gauge, with original chrome v-profile bezel. Choose black or magnolia face

Seven carries a variety of round, self-adhesive logo badges for use with BG2602 and BG2702 gearshift knobs, and SAC0192 key fob. Approximately 1" across (27mm).

This 1960's-style flip-top cap attaches to the classic Mini's fuel tank neck and covers a standard Rover locking gas cap

This nice polished stainless steel cap keeps your pricey fuel where it belongs. As used on classic Minis from 1970-on.

Domed vented gas cap as supplied on many classic Minis. Highly polished stainless steel with full edge knurling.

Smiths water temperature gauge; 30-110° Celsius with 6' capillary mechanical fittings.

Original spec electrical water temp gauge as used in Mk2-on Minis. Rounded chrome bezel replaces earlier v-shaped type. Smiths marking, with C-N-H scale. Normally used with GTR0104 sending unit.

Electrical water temp gauge as used in Mk2 on Minis. As original, but with popular magnolia face. Rounded chrome bezel. Smiths marking, with C-N-H scale.

A pair of black grille buttons for quick removal of the Mini grille for oil changes and servicing. A traditional and useful Mini accessory.

A pair of chrome grille buttons for quick removal of the Mini grille for oil changes and servicing. A traditional and useful Mini accessory.

Vinyl handbrake boot to over the handbrake lever in any classic Mini. Attaches to the carpet with "Velcro" type hook-and-loop closure

Heavy-duty chrome-plated wire mesh stone guard set; fits 7" headlights