Exterior

This pair of rubber hooks can be used as quick release fasteners on almost anything. On the Mini they are most often used to secure tilt front-ends or removable bonnets.

These lightweight rubber hooks are most commonly used to secure fiberglass boot lid or bonnet on the Original Mini.

Quick-release, heavy duty bonnet pin set; includes pins, clips, finishing plates, and cable tethers so you don't lose the clips.

Special Tuning Works style single bonnet strap in original tan. Single bonnet strap, as used by the Special Tuning Department on works Minis. This very heavy duty bonnet strap is

Single bonnet strap, as used by the Special Tuning Department on works Minis, but in black. This very heavy duty bonnet strap is a excellent reproduction of the original. 3.3mm

Pair of John Cooper-style bonnet stripe decals. Choose from white (MSA1120), black (MSA1121), or silver (MSA1123).

Boot lid badge for the Mk3 Mini Cooper S. Black on genuine chrome backing.

The boot t-handle was one of the more appealing traditional design components of the early Minis. Chrome plated, with lock and keys. Also fits rear of Van and Estate, although

Protect your Classic Mini Cooper from the elements with this Coverbond waterproof yet breathable car cover. Custom tailored to fit all Mini Sedans. Comes with storage bag and lock and

Since Minis were built in both right-hand and left-hand drive versions, the windscreen cowl panel of later body shells was punched for either type of wiper configuration. Instead of filling

Vinyl self-adhesive sticker/decal, metallic silver. Blue "Leyland" with "ST" flag logo, over "Take care to select correct replacement ST parts". Approx. 4-5/16"x 1-3/8".

Protect your paint job from scratches make by your rings and fingernails. Polished stainless door shields fit in the dish behind the door handle. Simply loosen the exterior handle and

Double-line vinyl pinstriping as used on late Coopers and twinpoint Minis; 2mm wide lines, black with paper masking.

This 60's style flip-top cap attaches the Mini's fuel tank neck and covers a standard Rover locking gas cap. It installs easily with set-screws, and when you flip the cap

This nice polished stainless steel cap keeps your pricey fuel where it belongs. Used on Minis from 1970-on.

Standard gas cap as supplied on most Minis. Highly polished stainless steel as pictured.

A pair of black grille buttons for quick removal of the Mini grille for oil changes and servicing. A traditional and useful Mini accessory.

A pair of chrome grille buttons for quick removal of the Mini grille for oil changes and servicing. A traditional and useful Mini accessory.

Stainless steel trim pieces fit over headlamps, below the lamp retaining ring. A very charming and period accessory.

A pair of heavy-duty chrome plated wire mesh stone guards to give your Mini the Rally look while protecting your headlights. Set includes mounting hardware. Fits 7" headlight.

Black leather fastening straps that can be used for securing panels where a traditional look is required.

Reproduction of chrome metal D-shaped lamp fitted to many cars in the 1960s. The Mk1-2 Mini Saloon had one of these fitted to the hinged license plate holder on the

This stylish locking vented gas cap is modeled after the caps found on more expensive classic cars. As shown, the key slot is concealed by a swingdoor.Stainless steel.

Locking fuel cap with keys from Rover's original supplier. Modern-looking vented cap secures your gas from theft.

Reproduction license plate lamp for Mk1-2 Minis, Van, Traveller, Pickup, and Moke. On long wheelbase cars there are two, one on either side of the US license plate. Black finish, with metal body as original.

This chrome nut is used on the 8G8710 round mirror. Chrome plated to add a finishing touch. Sold each and not included with bare mirrors.

A pair of chrome metal latches that are handy for fastening body panels. Pulls tight by puling the lever over center. Release by lifting the lever.

Brass rivet for headlight bezel, to give an original look for a correct and proper early Mini restoration.

Checkered roof decal for classic Mini, black checkers for application to a light-colored roof. See DAF105090NMN for white decals for application on dark roofs (shown in photo).

Checkered roof decal for classic Mini, white checkers for application to a dark roof. See DAF105090PMA for black decals for application on light roofs.

Genuine Rover accessory; kit is made of pre-cut vinyl and can be applied by anyone. Intended to go on cars which have a white painted roof.

Two cross bars clamp to the rain gutters for easy installation. This design will not work loose or damage paint, and once installed, the rack is flat and can carry bulky items.

This screw fits the G283 door lever/handle, as well as the GAM0258/9 mirrors and SAC0079 and SAC0080 bonnet straps.

Universal seating strip for fender flares. Install between fender flare and steel body work for a finished appearance and to conceal small gaps and variations in fitting.

Quality reproduction part. These eyebolts are welded so they don't pull open under strain. Sold each.

Heavy-duty tow eye for the front of the classic Mini. Attaches to the front subframe through the large hole below the front bumper.

Extra heavy-duty and long tow eye for use with front air dam. Attaches at the front subframe bolt, as with the standard tow eye. Sold each.

This very strong tow eye bolts to the underside of the rear subframe. Aftermarket; sold each.

For those who value form over function, use this dummy fuel tank neck and grommet to give your Mini the "Cooper S" look.

Made especially for the roll-up window classic Mini, these deflectors install by fitting into upper window channels. Sold per pair.

Chrome on metal wiper bezel kit. A nice upgrade from the black plastic bezel that your car came with! Complete kit includes a pair of chrome wiper wheel box finishers,

Chromed metal wiper plinth kit for Mk3 and later. 8-sided nut. Sold in a car set.