All Products

Short-length intake valve for original classic Mini Cooper S with AEA185 or AEG163 cylinder head casting. Ref: AEG594, V33974, AEG0594.

Replacement valve for expensive short-stem Cooper S exhaust valve. Conventional tulip shape; uses standard clip groove.

Race-quality short-length intake valve for original Cooper S with AEA185 or AEG163 cylinder head casting. Ref: AEG593, V33973.

Inlet valve for engines with narrow keeper groove. 1.094'' head diameter. Sold each.

1.15'' anti-reversion exhaust valve, made of EN214N stainless steel. Ref: C-RIM106, SEN0071, 12G940, RIMFLOW1.15L, SV300-52.

Oversize 1.21'' anti-reversion exhaust valve; made of EN214N stainless steel, with flash chrome plated stem. Ref: C-RIM107, RIMFLOW1.21L.

Classic Mini anti-reversion intake valve, made of EN214N stainless steel, with flash chrome plated stem for use with standard iron guide.

Sheet metal oil cooler brackets as used on classic Mini Coopers up to 1965; reproduction.

Replacement bolt-on center for Verto flywheel; needed when the tapered inner surface is found damaged after the flywheel has been removed. Ref: DAM5921.

This steel outer ring saves four pounds compared to the stock cast iron Verto version. Ref: C-AEG422.

Lightened steel flywheel for single-point injection classic Minis only. Ref: C-AEG425, C-AEG423.

Single V-belt pulley type only; can be used as a replacement for the two-piece Cooper 'S' unit. Ref: CAM4929, CAM4929R. CAM4929-REB. SEVUCAM4929

1''-thick vibration dampener front pulley for A-series engines. Ref: C-CAM4929R, CAM4929.

Metal VIN body plate for Austin Morris Group, normally stamped from the back side with the car's VIN number in the open space. Ref: CP339, LMG1022, SMI0158.

Correct VIN, or Chassis ID plate, for Austin Minis from 1959 through 1965. No seat belt reference. Ref: SMI0079, CP314.

Blank aluminum Austin VIN or chassis ID plate, as used for 1965-1968 models

Blank metal VIN plate from ''Morris Motors Ltd.''

Chassis VIN plate for classic Rover Minis from approximately 1988-1999

52mm diameter 10-15 volt meter, chrome bezel with SMITHS logo; choose black or magnolia face. Ref: SIB220, SIB220MG, ABV2220-00C, ABV2220-04C.

Also called the ''contol box'', this unit controls the output of the generator to keep the battery fully charged. Ref: NCB101, 37290, GEU6603.

Replacment control box for Austin America and MG1100 for original RB340 Lucas unit. Ref: NCB130, NCB130E, LUNCB130.

Voltage stabilizer for classic Mini Clubman models, and 1984-1988 classic Minis with driver’s-side gauge cluster.

A modern, solid-state version of the voltage stabilizer; for negative ground classic Minis only. Ref: C34770A, BR1310-00.

A modern, solid-state version of the voltage stabilizer; for positive ground classic Minis only. Ref: C34770, C34770POS, C34770-POS.

Windshield washer fluid bottle, as fitted in the engine compartment from 1983-88, and in the boot 1991-on. Ref: GWW935, ADU3906.

Washer bottle cap for wide mouth version of early washer reservoir GWW918. Ref: GWW952, RTC3880EVA.

Blue cap with lanyard for windscreen washer bottle GWW935, which was fitted either under the hood or in the boot. Ref: GWW975.

Cap and tubing outlet for GWW906 washer reservoir. Also fits the center of GWW952 cap. Ref: GWW951, DMB000951EVA.

All-in-one kit that includes a windshield washer fluid bottle, electric pump, and mounting bracket. Ref: WSB101.

One-liter water bottle as used from approximately 1970-1980. Ref: GWW906, 13H6482, WSB180.

White plastic windshield washer reservoir, as fitted in the engine compartment on 1988-91 classic Minis. Ref: GWW940.

Reproduction of the MK1 classic Mini washer bottle, with the original-type narrow neck. Ref: 17H2536, GWW918, GWW0918, ADA3833.

Windshield washer nozzle with single-hole jet, as used on Classic Minis 1970-1980. Ref: GWW804, GWW0804.

After 1980, all classic Minis used this plastic washer nozzle, which pushes into a d-shaped hole in the cowl. Ref: GWW829, GWW1080.

Original-shape windshield washer jet for Mk1 and Mk2 classic Minis. Ref: GWW807, 14A7379.

Single-jet windscreen washer nozzle in chrome metal. Ref: GWW802, WSB136, GWW810, GWW0802.

Twin-jet black plastic windshield washer nozzle for Mk1 and Mk2 classic Minis. Ref: MS389.

Adjustable chrome twin-jet windshield washer nozzle, a nice upgrade for almost any classic Mini. Ref: GWW801, GWW0801.

Electric windshield washer pump, as fitted directly to the washer bottle in 1990-1996 classic Minis, including SPi. Ref: GWW130, GWW1192, GWW0130.

Electric windshield washer pump, as fitted directly to the washer bottle in 1990 through 1996 Minis including SPi.

Small remotely-mounted electric pump for windscreen washer jets. Mounts to firewall inside engine compartment. Ref: GWW125, WSB100.

Original-style push-button manual windscreen washer pump; mounting bracket not included. Ref: GWW102, 14A7274, GWW0102.

If your washer bottle is in the boot, this is the pump fitted originally to MPi classic Minis 1996-on. Ref: GWW1116.

T-fitting without check valve to distribute fluid to the washer jets on 1980-on models. Ref: GWW401, GWW0401.

Washer used under the block drain tap. Ref: 2K4954.

Felt washer for use in the oil system.

Felt washer used on either side of the lower eyelet on the Hydrolastic rear suspension helper spring.

Fiber washer as used on inlet manifold blanking plug ADP210. Ref: 1B3664.