Body & Trim

This full-length panel extends from front of the door opening to the heel board, including the section underneath the rear seat pockets. Choose right- or left-hand side.

This aftermarket panel is designed to replace a rotted inner sill, and includes a lower floor pan lip which allows the outer edge of the rusty floor to be cut away and replaced. Choose right- or left-hand side.

Inner sill panels for long-wheelbase classic Mini Van/Estate/Pickup models, Mk3-on. Includes mounting pads for carpet studs.

Inner sill for long wheelbase classic Mini Van/Estate/Pickup models. Includes mounting pads for carpet studs.

Left-hand partial inner wing body panel for 1991-on/Mk5-on classic Minis fitted with electric fan until introduction of the front radiator.

Front section only of the left-side inner wing panel, for Mk1, Mk2, and Mk3 classic Minis. Ref: CZH3065, SBO0722, 0801281.

Front section only of the right side inner wing panel, for Mk1 and Mk2 classic Minis; reproduction. Ref: SBO0721, REPAN039.

Front section only of the right-side inner wing panel, for Mk3 and later classic Minis with fresh air ducting inside fender. Ref: CZH3064.

Left-hand front inner wing repair section with the radiator slats only, as used on 1959-1989 Minis saloons.

Black plastic instrument gauge mounting pod with chrome trim, for early classic Mini Cooper and Cooper S. Ref: 14A9815, 14A9815T.

Oval plastic gauge housing as found in all classic Minis with three center-mounted gauges. Mk2-on type, which is self-supporting and does not require the metal inner plate. Ref: 24A2702.

Single-gauge mounting pod. Black plastic, as used on 1969-1984 850cc and 998cc Minis. Ref: LGA7548.

Single-gauge mounting pod. ''Old English White'' plastic, as used on 1961-1967 classic Mini and Mini Cooper. Ref: ADA3741.

Interior door cappings in burl walnut; for use on classic Minis with roll-up window doors. Ref: MSA0191.

Complete set of replacement all-chrome metal interior hardware for roll-up window U.K. Mk3 doors. Ref: MSA507.

Black plastic door handle with chrome bezel. Fits all roll-up window doors on UK classic Minis up to 1996. Ref: 34G2529, JPC8387PA.

Interior door latch assembly, as used on left-hand drive classic Minis. Ref: 24A2143, 24A2146.

Interior door latch assembly, as used on right-hand drive classic Minis. Ref: 24A2144, 24A2145.

Screw with special fine threads to secure the interior door latch to the door on Mk1-2 classic Mini models.

This cable release bonnet lock kit that relocates control of access to the inside of the car for anti-theft safety. Ref: GS130273, FSE10020KIT.

KAD's front anti-roll bar helps to control body roll for both road and race cars; 5/8'' front bar diameter. Ref: 1013209, KAD100A, KAD1013209.

This bar will help eliminate understeer and will allow a classic race Mini to be set up with a ''loose'' rear end if that is your choice for high-speed driving.

KAD rear blade type anti-roll bar; helps to control body roll for both road and race cars. Ref: 1013207, KAD1013207.

Rubber seating gasket for under the metal license plate lamp housing as used on Mk3 and later classic Minis. Ref: 13H6010, 54571498.

Black leather fastening straps that can be used for securing panels where a traditional look is required. Ref: MS121.

Clear replacement lens for license plate lamp used on Mk1-2 classic Minis, including long-wheelbase models. Fits original Lucas lamps.

Sheet metal bracket as used on U.S.-market Mk1 classic Minis, to allow for the use of the license plate lamp with U.S. plates. Ref: 14A8300.

Chrome metal D-shaped lamp, as fitted to many classic Minis in the 1960s; reproduction. Ref: 56790, BHA4153.

Original-style classic Mini chrome rear license plate lamp assembly, made from Lucas tooling with Lucas glass lens. Ref: 56790, 127916 56790OE.

Reproduction of the 56790 rear number plate lamp as used on classic Mini Vans, Estates and Pickups. Ref: 53837, 53837E, 83H335.

Economical plastic-bodied version of lamp on rear license plate mount, with rust-free chrome housing. Ref: 56790, BHA4154.

Steel front mount for license plate; attaches to brackets on front panel. Size is as used on British license plates.

Aftermarket panel for mounting the license plate at the rear of the classic Mini Van and Estate. Drilled to accept a lamp at each end.

Metal rear license plate mounting for some classic Mini Moke models, including U.K. Ref: ALA7189.

Multi-purpose 3/8'' internal-tooth lockwasher. Ref: GHF323, GHF0323.

Single locking exterior door handle with keys, bezel not included.

Slim exterior locking door handle for classic Minis to 1966; escutcheon sold seperately

Sheet metal adapter panel to reduce the large switch panel opening of Mk2-on lower dash rails to allow installation of Mk1 switch panel. Ref: MS029, SBO0431.

Universal lower door hinge for roll-up window classic Mini doors; fits both left and right sides. Ref: CZH212MS, CZH212.

Lower rear quarter panel for repairing damage below the window line, for Mk3-on models only. Ref: MS18R, MS18L, SBO0372, SBO0373.

Genuine Heritage lower quarter panel to repair rust or accident damage below the window line on Mk3-on classic Minis. Ref: HMP441014, HMP441015, HMP441014/HTG, HMP441015/HTG.

Aftermarket repair panel for the classic Mini Pickup, above seam. Choose right- or left-hand side.

Lower rear corner repair for the classic Mini Van/Estate; for patching the area from the rear wheel arch back to the door opening, and extending 2.5'' above the horizontal seam. Choose right- or left-hand side.

Weld-in repair panel for the lower portion rust-prone wheel arch area; pre-shaped to the contour of the inner fender. Choose right- or left-hand side.

Black strip that runs from front to rear wheel arches on the plastic classic Mini ''20th Anniversary'' flares. Ref: CZH4316, FLARE001.

This trim can be used on the lower seam flange, where the body side mates with the sill (rocker) panel flange. Ref: GZF108MA, GZF108M.

Plastic stepped chrome trim to cover the lower body seam at the rocker panel flange. Ref: GZF105A, GZF0105A.

U-shaped chrome plastic molding that slips over the rocker panel flange seam. Ref: GZF107A, GZF0107A.