Body & Trim

Original-style sponge rubber window seal for opening quarter-light windows as found on Mk1-Mk2 classic Minis. Ref: ALA5897.

Starting with the Mk3 models, the quarter window seal design became a rubber bulb attached to a vinyl channel. Ref: EAM7724, PAM1019.

Special-shaped seal for left-hand rear door on classic Mini Van and Estate models. Reproduction.

Special-shaped seal for right-hand rear door on classic Mini Van and Estate models. Reproduction version made of rubber sections glued together.

Rear glass seal, continuous rubber type; fits Mk1 classic Minis 1959-1967. Ref: 14A8744.

One-piece rear glas seal that fits all classic Minis Mk2-on; must be shortened for use on Mk1 classic Minis. Ref: JRC2674, CDB10017.

Door glass seal that fits window in left- or right-hand rear door of the classic Mini Van and Estate.

T-shaped rubber seal that fits into the lower windshield frame and seals the gap to the body; fits Cagiva- and Portuguese-made Mokes. Ref: ALA7231.

Flat foam seal that fits into the lower windshield frame and seals the gap to the body; fits UK- and Australian-made classic Mini Mokes. Ref: ALA7231-FOAM.

Reproduction metal finisher that covers the front external panel seams of the classic Mini. Ref: BMP127MS, BMP127.

Primed metal finisher that covers the front external panel seams of the classic Mini. Ref: BMP127, 14A9999, 14A9999/HTG.

Affordable reproduction seam covers, which do a good job at a modest price. Ref: BMP124, BMP125, BMP124MS, BMP125MS.

Reproduction seam cover for rear side of all classic Mini utility models. Ref: BMP131, BMP0131E.

Small seam cover behind the rear wheel. Ref: BMP129, 14A6795, BMP0129.

Rear step metal seam cover for the classic Mini Van, Estate, and Pickup. Ref: BMP130, 14A8368.

Premium seam cover, primed by the manufacturer. Ref: BMP124, BMP125, 14A6783, 14A6784.

Small metal plate with threaded nut for seat belt attachment. Normally welded to the inner sill for the outer mounting of the seat belt, but can be used in other positions if needed.

Seat belt rear anchor reinforcement for floor tunnel. Welds in place from underneath. Includes welded-in threaded belt hardware mounting points.

Stamped metal panel that forms the mounting point for the front seats for Mk4 and later classic Minis with rod change transmission and square tunnel. Ref: CZH2675, 13.32.01.05.

Stamped metal box section that runs across the floor and forms the mounting point for the classic Mini Mk1, Mk2 and Mk3 front seats. Ref: 14A9533, SBO0693.

Soft rubber seating strip for fender flares, installed between fender flare and steel body work for a finished appearance. Ref: SPL0060, SPL0059.

Highly-polished premium-quality burl walnut shift knob for the classic Mini. Ref: MSA0198.

Threaded, solid-aluminum shift knob; a reproduction of the shift knob fitted to the final 500 Mini Cooper Sports. Ref: BG8111.

A nice wood shift knob with a good size and shape, fits nicely in the hand, and is in a well-finished walnut-tone wood. Ref: BG2602.

Glossy wood shift knob with Morris bull motif logo. Ref: ACC123.

This plastic channel installs on the bare metal edge of the Mk2-on grille side trims, to prevent them from caffing into the paint on the front panel.

Complete classic Mini Pickup bed side panels; right side includes fuel filler opening. Ref: 14A7555, 14A7556, 14A7555MS, 14A7556MS.

Galvanized side panels for the 10"-wheel U.K. Moke; drilled to accept 1/4-turn fasteners. Ref: ALA7320, ALA7321.

Side valance panel filler for the classic Mini Van/Estate/Pickup. Ref: SBO0090, SBO0091, 14A7155, 14A7156.

Small bracket inside the sill box section to strengthen the jack socket. Ref: 14A8336, 14A337.

Small reinforcement bracket that goes between the inner and outer sill at the front; fits right-hand or left-hand. Ref: 14A9550.

Small bracket that reinforces the panel between the inner and outer sill rear; choose right- or left-hand side. Ref: 14A9552, 14A9553.

Front ''sling shoe brackets'', which are sheet metal pockets that accept the hooks that held and moved the body from place to place on the original assembly line. Ref: 24A41, 24A41/HTG.

Rear ''sling shoe brackets'', which are sheet metal pockets that accept the hooks that held and moved the body from place to place on the original assembly line. Ref: 24A42, 24A43, 24A42/HTG, 24A42/HTG.

Kit includes both bonnet (hood) latch spacer sleeves plus required hardware. Ref: ADA464.

Bonnet latch spacer sleeve fits underneath the bonnet cross member of the front panel and locates the guide plate of the release mechanism. Ref: ADA464.

Metal packing spacer for two-bolt subframe tower to body, pre-1976. Ref: 21A2341.

Black hardura spare tire cover with heavy felt backing; fits 10''-12'' tires

Specially-shaped plastic liner covers the spare tire and prevents items from contacting the battery. Ref: EBF100150, SBO0664.

Speedometer for center binnacle application, typically through 1983; late classic Mini Cooper S-style gauge with markings up to 130mph. Ref: 13H4442, 13H4442MG.

Cooper S speedometer with the kilometer scale as primary. Includes fuel gauge, voltage stabilizer and indicator warning lamp lenses. Ref: 13H4444, 13H4444MG.

Wide fender flares as introduced in 1996 for some special classic Mini models with 13'' wheels. Ref: DFK100470LML, ZUA000220LML, DFK100460LML, ZUA000210LML.

Wide rubber fender flares, as introduced in 1996 for some special classic Mini models with 13'' wheels. Ref: DFJ100240LML, DFJ100250LML, DFK100470LML, DFK100460LML, ZUA000230LML, ZUA000240LML, ZUA000220LML, ZUA000210LML.

Spring that adds tension to the cup of the classic Mini bonnet (hood) latch pin. Ref: FPQ10001, 14B2846, 14B2846/HTG, 14B2846.

Spring that adds tension to the cup of the classic Mini Clubman bonnet (hood) latch pin. Ref: 4G15885.

Reproduction ''Tudor'' decal, similar to those found on the washer fluid bottle under the bonnet of early classic Minis. Ref: ST124, SMI0135.

Peel and stick foil label to identify your classic Mini as negative ground. Ref: ST113, SMI0127.

Peel and stick foil label to identify your classic Mini as positive ground. Ref: ST113, SMI0174.