Bonnet/Hood Accessories

Pair of Cooper-style bonnet stripe decals, sized for the Mk2 and later classic Minis. Ref: MSA1120, MSA1121, MSA1123.

Chrome bezel for 24G1201 Austin Mini bonnet badge, as found on Mk1 classic Mini 850 models. Ref: 14A6837.

Chrome oval surround for bonnet badge on Mk2 Cooper S models. Ref: ALA6519, ALA6514, ALA6515.

Mk3-on classic Mini bonnet badge in black, silver and blue. Three pin mounting.

Replacement chrome surround for Austin Cooper Mk2 bonnet badge.

Bonnet hinge for 1980-on classic Minis; choose right- or left-hand. Ref: BMP348, BMP349.

Quick-release stainless bonnet (hood) hinges to replace the original bonnet hinges on Mk1-Mk2 classic Mini models.

Quick-release stainless bonnet hinges to replace the original bonnet hinges on the Mk3-on classic Mini.

New bonnet hinges for Mk1 and Mk2 classic Minis, made by British Motor Heritage from original tooling. Ref: 14A7246, 14A7247, 14A7246/HTG, 14A7247/HTG.

Seal found at the rear of the engine bay; helps prevent the ingress of water and debris into the engine compartment. Ref: JRC7008.

V-section seal fits across the front of the bonnet on late classic Minis; helps prevent the bonnet from vibrating against the front panel crossmember. Ref: JRC7898, CZH1953.

Push-on rubber and metal seal for MPi (multi-point injection) classic Minis.

Self-adhesive neoprene seal that fits in the channel of the windshield cowl. Creates a seal when the bonnet is closed.

Bonnet cloth braid to prevent metal-to-metal contact. Sold in one-meter lengths. Ref: BSE1066, SBO0265, BB01.

Half-height 3/8'' SAE nut for use on rear brake hoses, bonnet pin, and twin HS2 intake manifolds. Ref: NT606041.

Soundproofing under-bonnet pad and firewall blanket kit helps reduce engine noise noticably. Ref: CK979, CK979A.

Cleanable black Hardura material backed with felt; cutouts fit over the appropriate hardware. Ref: CK975A, CK975.

Black Hardura under-bonnet soundproofing pads for Mk3 classic Minis. Ref: CK980A.

Bonnet (hood) insulation kit and firewall blanket for square-nose classic Mini Clubman models. Ref: CK977A.

Bulkhead/firewall soundproofing pad to fit the classic Mini. Cleanable black Hardura vinyl material backed with felt; flame resistant. Ref: CK3000.

Stock steel bonnet prop rod; this style has changed a little over the years so may not match your old one exactly. Ref: BKD360030, 24A857.

Rubber clip on Mk1 and Mk2 classic Mini bonnets (hoods) to hold the prop rod. Ref: 2H9215.

Metal bonnet (hood) prop clip as used on Mk3 and later classic Minis; holds the prop when the bonnet is closed. Ref: CZH209.

Safety hook to provide a secondary means of keeping the bonnet shut. Ref: ALA7608, 14A366.

Bonnet latch spacer sleeve fits underneath the bonnet cross member of the front panel and locates the guide plate of the release mechanism. Ref: ADA464.

Spring that adds tension to the cup of the classic Mini bonnet (hood) latch pin. Ref: FPQ10001, 14B2846, 14B2846/HTG, 14B2846.

Spring-loaded cup on the classic Mini bonnet latch pin. Ref: ADA458, ADA0458.

Metal guide on top of the bonnet crossmember of the front panel; fits all through 1996. Not for MPi models with FPS100340 latch.

This spring returns the bonnet release under the front panel bonnet crossmember. Ref: 4G2494, 24G3591.

This cable release bonnet lock kit that relocates control of access to the inside of the car for anti-theft safety. Ref: GS130273, FSE10020KIT.

Bonnet release cable, as standard on all classic Minis from 1992/3 to 2000. Ref: FSE10020.

Bonnet (hood) prop rod retaining clip; attaches the rod to bonnet at the pivot point near the front. Ref: 24A859.

Original-style heavy-duty leather straps for securing the bonnet/hood of the classic Mini, in tan or black. Ref: C-AJJ3380, C-AJJ3381.

Rubber bonnet hook to secure the classic Mini Moke hood. Ref: HYK2570, BHM9640.

Nickle-sized rubber buffer that fits on the bonnet slam section of the front panel. Stops the bonnet from damaging the painted surfaces and helps to prevent rattles. Ref: 14G6856.

This pair of rubber hooks can be used as quick release fasteners on almost anything; most often used on the classic Mini to secure tilt front-ends or removable bonnets

Lightweight rubber hooks most commonly used to secure fiberglass boot lid or bonnet on the classic Mini. Ref: MS119, SAC0035.

Small stick-on bumper added in 1990 at the sides of the ''slam panel'' to locate the bonnet. Ref: ADU2072.

Latch pin that attaches to the Classic Mini bonnet (hood) and helps hold it to the front panel when closed. Ref: 14A6586.

Bolts to an existing hinge and is spring-loaded to act as an auxiliary bonnet prop. Ref: MSSK018.

Small sheet metal bracket on right inner fender inside engine bay to accept the lower end of the bonnet stay rod

Small rubber bumpers to prevent the bonnet (hood) from slamming down or rattling on classic Clubman Minis. Sold each.

Black leather fastening straps that can be used for securing panels where a traditional look is required. Ref: MS121.

Polished, straight stainless steel bonnet prop rod as used on Mk1, Mk2, and Mk3 classic Minis.

Bonnet safety catch, with spring, pin, and mounting bracket. Provides a secondary means of keeping the bonnet shut should the bonnet latch comes loose.

Quick-release, heavy duty bonnet pin set; includes pins, clips, finishing plates, and cable tethers so you don't lose the clips.

Classic Mini bonnet latch (catch) for use with internal cable release, as fitted 1993-1996. Ref: FPS10002.

Bonnet slider return spring, used on classic Mini Clubman models 1969-1980, and also the 1997-on MPi classic Mini. Ref: 24G3591.