Products 577-596 of 596
Item #: AEG0593 -
Race quality 1.4"x 3.52" short-length intake valve for original Cooper S with AEA185 or AEG163 cylinder head casting. Now in modern stainless material and thin-profile high-flow head design.
Item #: CAM6391 -
Inlet valve for engines with narrow keeper groove. 1.094" head diameter. Sold each.
Item #: SEN0071 -
1.15" Anti reversion exhaust valve. The valve face design allows exhaust gas charge to flow into the exhaust port, while reducing the tendency to back up once the piston has reached top dead center.
Item #: SEN0072 -
Oversize 1.22 Anti reversion exhaust valve. The valve face design allows exhaust gas charge to flow into the exhaust port, while reducing the tendency to back up once the piston has reached top dead center.
Item #: SEN0066 -
1.42" (36mm) x 3.57" anti-reversion intake valve, made of EN214N stainless steel, with flash chrome plated stem for use with standard iron guide.
Item #: SEN0067 -
1.44" X 3.57 Anti Reversion intake valve valve. The valve face design allows the intake gas charge to flow into the cylinder, while reducing the tendency to back up once the piston has reached bottom dead center.
Item #: SEN0067-ORIG -
Rimflow intake valve, 1.44" head diameter. Long stem, for 12G940 series castings. Single narrow keeper groove. This is the early design Rimflow valve, later ones have a different face.
Item #: SMI0079 -
Correct VIN, or Chassis ID plate, for Austin Minis from 1959 through 1965. No seat belt reference.
Item #: SMI0158 -
Metal VIN body plate for Austin Morris Group. It is normally stamped from the back side with the car's VIN number in the open space.
1/8/2018 12:00:00 AM
Item #: SMI0081 -
Blank metal Austin VIN plate.
Item #: SMI0080 -
Blank metal VIN plate from "Morris Motors Ltd."
Item #: 2K4954 -
Washer used under 3H0576 block drain tap.
Item #: 7H1758 -
Felt washer for use in the oil system.
Item #: FOR029 -
We have selected this heavy-duty washer to use under the front pulley bolt, to reduce the tendency of that bolt to work loose.
Item #: 2K4956 -
Copper washer, seals mechanical oil pressure line adapter to engine block.
Item #: W516916 -
ARP parallel-ground heavy-duty 5/16" flat washer. Used on rocker shaft pedestals, and included in SEN0409 and SEN0410 kits.
Item #: 6K638 -
Copper sealing washer for the coolant drain plug on the back side of the engine block.
Item #: 88G0215 -
Paper gasket between the water pump and the block. Included with all water pumps.
12/18/2018 12:00:00 AM
Item #: 8G0726 -
Rubber waterproofing boot for the early, side exit distributor cap as used on 25D distributors found on the Mini from 1959 through 1973. Because they have no individual boots, these
Item #: SMI0194 -
To help prevent damage to catalytic converters the EPA has mandated that zinc levels be reduced in motor oils. Zinc is an important high-pressure lubricant that is needed whenever two