Lamps, Bulbs, & Lenses

Nylon block that is held to the steering column and triggers the turn signal canceling mechanism.

Original-style metal lamp housing for boot (trunk) lids beginning with Mk3 classic Mini models. Ref: 13H6900, 13H6900P.

This rubber boot covers the turn signal housing inside the front fender well of the classic Mini. Ref: 576105, 37H5527, 508162.

The pressure of the brake fluid activates this switch, which screws into a fitting on the front subframe at the right side. Ref: C16062, SPB400, C16062A, 51600, XBLS7.

Brake fluid pressure activates this switch, which screws into the banjo fitting on the front subframe on the right side. Ref: C16062, C16062HD, SMB423, C16062A.

Single-function socket for early turn signal lamp, as used on U.K. classic Minis with parking lamp bulb inside main headlamp. Ref: 576986, 37H5528, 54584780.

Dual-function (turn indicator and parking light) for early ''beehive'' front indicator lamp, as fitted to non-UK classic Mini models.

Tubular or ''festoon''-style lightbulb; fits Mk1-3 classic Mini interior lights and Mk3 and later license plate light. Ref: LLB239, GLB239.

Dual-element light bulb, as used on U.S.-spec front turn signal and all rear brake/tail light. Ref: GLB380, 380, LLB380.

Red, dual-element bulb to be used for brake/tail light when clear lenses have been installed. Ref: GLB380RED, 380RED.

55-watt H3 bulb to fit driving and fog lights. Ref: GLB453.

Small based bulb, most commonly used in Mk1 and Mk2 license plate lights and side marker lights on Canadian Minis. Ref: GLB989, LLB989, 989.

Bayonet-type panel lightbulb, typically used on oil and water temperature gauges. Ref: 281, GLB281, LLB281.

Screw-in style panel bulb, typically used on speedometer illumination and indicator lights. Ref: GLB987, LLB987.

Amber bulb for 1986-on wing side marker lamp. 5-watt, push-in bulb

Clear bulb for 1986-on wing side marker lamp and also modern headlamp units with Euro-spec pilot light. 5-watt, push-in bulb. Ref: GLB501, LLB501.

Single-function bulb for European-spec front turn indicator light and and all rear turn indicators. Ref: 382, LLB382, GLB0382.

Single element 5W bayonet-mount bulb.

Single-element turn-signal light bulb in amber; for use with clear or white-colored beehive lenses. Ref: GLB343.

Small bulb as found in the stalk-mounted turn signal indicator 31945 and illuminated rocker-type switches 1976-on. Ref: 280, LLB280, GLB280, GLB921.

Upper tail light lenses in clear with amber and red bulbs for converting the rear of a Mk4-on classic Mini to a customized clear-lens look. Includes parts for both sides.

Small spring clip to receive the mounting screw of ''beehive'' front indicator lamps. Ref: GHF711, AK606021.

Metal bracket that clips to the headlight bucket assembly and serves as the anchor point for the chrome headlight bezel. Ref: 37H7421, 37H7421A.

Larger of the two floor-mounted headlamp dimmer switches found on the Mini. Used on early Mk1 Minis. Wires are connected with set screws instead of spades.

Floor-mounted headlamp dimmer switch. Ref: 34790, RTC432A, RTC0432A.

Wipac driving lamps; chrome, all-metal body, with an attractive finish that will compliment the chrome brightwork on your classic Mini. Ref: S6007, WIS6007.

See and be seen with Wipac fog lights, projecting a wide beam to light up the sides of the road. Chrome, all metal body, Ref: S6078, WIS6078.

Small bracket-mounted red lamp as required by European laws to prevent rear-end collisions. Ref: MSA1115.

Single-function turn signal lamp and plastic amber lens, as used on classic Minis 1987-on. Ref: AFU3389, 57270.

Single-function turn signal lamp and clear plastic lens, as used on classic Minis 1987-on.. Ref: AFU3389W, AFU3389WHITE, AFU3389.

Plastic-lens version of beehive front USA-spec dual function turn indicator lamp. Ref: 1B9100, 1B9100MS.

The classic beehive front indicator lamp, with amber glass lens and 2-wire bulb socket for single-element bulb. Ref: 56583, 2A9013, LPB100.

Front turn signal light for 1997-on MPi Rover Mini. Clear glass with amber bulb; includes new screws and base gasket.

Complete assembly with clear glass lens and chrome retaining ring, USA specification. Dual function (parking and indicator) socket. Ref: 52338, 1B9100.

Foam gasket to fit tail lamp lenses with integral clear reverse lenses, except for Altissimo-made units. Fits both left and right sides. Ref: XFH100460.

Foam rubber lens seating gasket as used on Mk2 tail lamp. Ref: 37H6778.

The Mk1 tail lamps use this sponge rubber gasket between the lamp base and the body. Ref: 54571330, 57H5399, 47H5361.

The classic Mini Van, Estate (Wagon) and Traveller (Woody) tail lamps use this sponge rubber gasket between the lamp base and the body. Ref: 57H5167.

This sponge rubber gasket fits between the lens and the tail lamp assembly on the Mk1 classic Mini. Ref: 54570450, 57H5399.

5/8'' diameter grommet for the holes in the later-model classic Minis' rear valance. Ref: 14A7033.

Headlamp adjuster screw kit includes screws, plastic nuts, and tension spring. Ref: 60600427, MS14K, BHM7058.

Complete headlamp assembly, including a Wagner sealed beam headlamp bulb suitable for left-hand drive. Ref: 59191, BHM7198, 27H8207, 60713.

''Quadoptic'' H4 halogen headlights with European pilot light, with chip-resistant lenses that deliver a wide, flat beam. Ref: S4699B, WIS4699B.

Stainless steel headlamp ring, includes retaining screw; no drain holes. Ref: 500929, 500929MS, 54520650.

Premium chrome over stainless steel headlamp bezel. Made in the U.K. by Wipac. Ref: S5435, WIS5435, 500929W, DHF100060.

Metal bowl that supports the headlamp bulb itself. Ref: 27H6481, 54528191.

Original-style metal headlamp bucket; fits all except self-levelling headlamps. Ref: 54522342, MS14, HLB001.

Plastic headlamp bucket assembly for 7'' round lamps, includes retainer, seal, and hardware. Ref: S5400.