Panels / Sheet Metal

Metal panel that covers the side storage panels on the classic Mini Moke. Ref: ALA7164.

Genuine Heritage jacking point with a reinforcement repair part to attach to the crossmember extension for all classic Minis. Ref: 14A8374, 14A8375.

Mk3-on weld-in lower parcel shelf metal panel with hole for switch panel; fits between the A posts. Ref: BMP201.

Steel upper dash rail with center hole for ash tray. Has holes near the end to accept the padded upper dash, as used from 1984. Ref: 14A6675.

Repair patch for the bottom structure of sliding window door; aftermarket. Ref: MSP002L, MSP002R, REPAN037, REPAN038.

This panel replaces the bottom 3.5'' of the inner frame of the door, plus the bottom lip. Fits roll-up window doors only. Ref: MS34R, MS34L.

Replacement door frame surround panel for roll-up window classic Minis only. Ref: CZH122/HTG, CZH123/HTG, CZH122, CZH123.

This patch panel can be used for rust repair in the lower outer skin of the Mk3 classic Mini door. Aftermarket.

Lower section of outer skin of the classic Mini Van/Estate rear door; includes the lower edge of the window. Ref: 14A8096/SKIN, 14A8097/SKIN.

Outer door skin (only) panels for Mk1 and Mk2 classic Minis with sliding windows; reproduction. Ref: MS12R, MS12L.

Reproduction aluminum door skin; lightweight for racing applications. Ref: 14A5498AL, 14A5499AL, MS12AR, MS12AL.

Heritage Mk1-Mk2 classic Mini door skins made off the original BMC/Rover tooling. Ref: 14A5498, 14A5499,14A5498/HTG, 14A5499/HTG.

Quality aftermarket door skin, ideal for economical repair of a rusty classic Mini roll-up window door. Ref: MS11R, MS11L, CZH3300, CZH3301.

Heritage Mk3-on door skin that replaces the original, exactly as new. Must be welded to the old frame. Ref: CZH3300, CZH3301.

Door step and lower panel for the classic Mk3-on classic Mini Estate. Aftermarket. Ref: MS48R, MS48L, SBO0705, SBO0706.

Body panel that forms the top edge of the door step and extends all the back to the rear wheel; fits external-hinge classic Mini Estate, Pickup, and Van. Ref: MS47L, MS47R.

Roll-up window classic Mini body panel ideal for repairing rusty sections commonly found in the door step and lower rear quarter panel areas. Ref: MSL28R, MSL28L, SBO0329, SBO0330.

Reproduction door step repair panel, for Mk1-Mk2 classic Mini Saloon (sedan) only. Ref: MS28R, MS28L, SBO0064, SBO0065.

Patch panel ideal for replacing Mk3-on classic Mini door sill/steps. Ref: MS48R, MS48L, SBO0648, SBO0649.

Properly-shaped lower door frame repair panels for all external-hinge classic Minis, including Mk1, Mk2, Mini Pickups, Vans, and Estates.

This steel panel supports the rear load floor on Austin, Morris, and Leyland Mini Estate and Van, and and also serves as the step for the rear "barn doors".

Mk3-on LH door for cars to 1989. Does not include integral safety bar, and hinges are not included.

Classic Mini Mk3-on right-hand door only, for models to 1989. Ref: BMP326, BMP0326.

USED Classic Mini Mk3-on right-hand door for cars to 1989; sold as-is. Ref: BMP326, BMP0326.

Original-spec left-hand side door for late roll-up window classic Minis. Ref: BDA360110, BDA360110/HTG, CZH3075.

Original-spec right-hand side door for late roll-up window classic Minis. Ref: BDA360100, BDA360100/HTG, CZH3074.

Original-spec Mk1-Mk2 classic Mini doors, made by British Motor Heritage. Ref: 14A8306, 14A8307, 14A8306/HTG, 14A8307/HTG.

Narrow drip rail fitted to the underside of the rain gutters above the side windows on 1964 to 1980 classic Minis. Ref: 14A8462.

British Heritage fenders for classic Minis 1988-96, with side repeater lamp hole pre-cut. Ref: BMP454, BMP455.

Reproduction fenders with correct headlamp and side repeater lamp holes; the left fender has a hole for an antenna. Ref: BMP454MS, BMP455MS, BMP454, BMP455.

Front fender wing body panel for the classic Mini Clubman. Ref: CZH408, CZH409.

Heritage-produced classic Mini front fenders made to the original design, with round headlamp opening. Ref: 14A7240, 14A7241.

Front fender for classic Minis to 1985, ideal for budget restorations. Ref: MS1L, MS1R, 14A6476, 14A6477.

A classic Mini weld-in filler panel to convert modern front panels to the early full valance, which had no cutouts for brake cooling. Ref: MS027R, MS027L.

Firewall crossmember as fitted to 1976-on classic Minis. Includes large holes for tandem master cylinders on both sides, universal fit for right-hand drive and left-hand drive.

The commercial Minis, the Van and Pickup, used this extension to lengthen the floor of the standard sedan.

Front floor repair section for fuel-injected classic Minis 1991-on. Ref: MSL25R, MSL25L.

Tailored aftermarket floor sections that are actually a better option than Rover's own repair panels, for rusty panel repair. Ref: MS25R, MS25L.

Rear floor repair section for for fuel-injected Mini; panels are 38'' long and include area under the seat pocket. Ref: MSL26R, MSL26L, SBO0736, SBO0737.

Replacement floor sections for classic Mini Saloons, 1959-1990. Ref: MS26R, MS26L, BHM0011E, BHM0012E.

Front bumper mount lip for all classic Minis from 1959-2000, except for Mini Clubman. Welds to nose panel; no license plate brackets

Genuine Heritage full-length inner wing (fender) for the left-hand side of Mk1-Mk2 classic Minis. Ref: 14A7901, 14A7901/HTG, 14A8389.

Genuine Heritage full-length inner wing (fender) for the right-hand side of Mk1-Mk2 classic Minis. Ref: 14A7900, 14A7900/HTG, 14A8388.

End-only repair piece for the classic Mini front nose body panel; choose right- or left-hand side. Ref: MS5L, MS5R.

Heritage-version classic Mini front body panel with rubber mounts, as used 1976-1996.

Front body panel for the 1990-1996 classic Mini; Heritage version for the best fit and finish.

Reproduction front panel as used on the front-radiator 1997-2000 MPi classic Mini. Ref: SBO0655, ASJ360070, ASJ360070MS.

Heritage front panel for 1997-on classic Minis with front-mounted radiator. Ref: ASJ360070.