Products 193-235 of 235
6/17/2019 12:00:00 AM
Item #: SBO0178 -
Rear subframe mounting and rear floor skirt panel for all classic Mini Vans and Pickups. Special order.
Item #: SBO0638/9 -
This economical aftermarket valance stiffener is an excellent choice for most installations. Choose right- or left-hand side.
Item #: HMP441020E/21E -
The panel you should use to provide the necessary reinforcement of the rearmost subframe trunnion block and for full closing as original of the valence panel ends. Reproduction; choose right- or left-hand side.
Item #: SBO0016/7 -
The classic Mini, Estate, Pickup and Van have a three-piece rear valance; these go from rear wheel to the bumper. Reproduction; choose right- or left-hand side.
Item #: CZH3353 -
The genuine Rover valance panel is the best made and best fitting. Has holes and fittings as used on recent Minis for rear fog lights, etc.
Item #: SBO0015 -
Reproduction center valance panel for the classic Mini Van/Estate/Pickup.
Item #: 14A6940 -
Genuine Heritage rear valance panel for Mini Saloon. This panel is undrilled for the accessory lights that were used on later Minis and as found in current Rover rear valance.
Item #: SBO0367 -
Many people prefer the reproduction valance panel for restoring older Minis, since it has none of the holes and fittings found on the Rover panel. Ships UPS. See also end
Item #: SBO0694/5 -
This is a small section of the rear quarter panel to repair rust that is often found above the wheel opening. Choose right- or left-hand side.
Item #: 14A6617/8 -
The top outer section only of the rear inner wheel arch; does not include the shock absorber mounting turret. Genuine Heritage; choose right- or left-hand side.
Item #: 11.41.03.03/04 -
This small sheet metal panel goes between the rear seat back and the rear wheel arch. Used only on hydrolastic Minis, as is serves as a reinforcement for the rear suspension bump stop. Aftermarket; choose right- or left-hand side.
Item #: SBO0084/5 -
Rust repair panel for the front (A-post) door jamb, including a hole for remounting the overhead lamp switch. Choose right- or left-hand side.
Item #: HMP441017 -
This panel allows the original speedometer hole to be restored by welding in this repair panel, and is large enough to cover all but the biggest air box cutout.
Item #: 14A5503 -
If you roll your Mini or have hail or other damage, the roof panel can be replaced. Available only by special order, allow six weeks. Must be shipped by truck.
4/26/2019 12:00:00 AM
Item #: 88G486-USED -
Pop-up air vent assembly used on the classic Austin, Morris, and Leyland Mini Van. Used, original part in un-restored condition.
Item #: SBO0062/3 -
This reproduction panel can be used to repair the subframe mounting points at the ends of the heelboard. Choose right- or left-hand side.
Item #: SBO0078/9 -
Small rust repair patch for lower rear corner of Mk3-on rear quarter panels, for rust between the wheel arch and rear seam. Reproduction.
Item #: 24A2186 -
Small metal plate with threaded nut for seat belt attachment. Normally welded to the inner sill for the outer mounting of the seat belt, but can be used in other positions if needed.
7/12/2017 12:00:00 AM
Item #: 24A2187 -
Seat belt rear anchor reinforcement for floor tunnel. Welds in place from underneath. Includes welded-in threaded belt hardware mounting points.
11/10/2017 12:00:00 AM
Item #: 13.32.01.05 -
Stamped metal box section that runs across the floor and forms the mounting point for the front seats. For Mk4 and later Minis with rod change transmission and square tunnel.
5/18/2017 12:00:00 AM
Item #: SBO0693 -
Stamped metal box section that runs across the floor and forms the mounting point for the front seats. For Mk1, Mk2, and Mk3 Minis with remote or magic wand shift.
Item #: SBO0642 -
Inner rear arch shock mount, fits right and left sides. Aftermarket
8/21/2017 12:00:00 AM
Item #: 14A7555 -
Complete Mini Pickup bed side panels, choose right-hand or left-hand side. Right side includes fuel filler opening.
Item #: ALA7320/1 -
Galvanized side panels for the 10"-wheel U.K. Moke; drilled to accept 1/4-turn fasteners. Storage compartment cover(s) not included. Right-hand side has threaded inserts to accept battery cover (not included). Choose right- or left-hand side.
Item #: SBO0090/1 -
Side valance panel filler for Van/Estate/Pickup. Reproduction, choose right- or left-hand side.
Item #: 14A8336/7 -
Small bracket inside the sill box section to strengthen the jack socket. Rover; choose right- or left-hand side.
Item #: 14A9550 -
Small reinforcement bracket that goes between the inner and outer sill at the front; fits right-hand or left-hand.
Item #: 14A9552/3 -
Small bracket that reinforces the panel between the inner and outer sill rear; choose right- or left-hand side.
Item #: 24A0041 -
These are front "sling shoe brackets", which are sheet metal pockets that accept the hooks that held and moved the body from place to place on the original assembly line.
Item #: 24A0042/3 -
These are rear "sling shoe brackets", which are sheet metal pockets that accept the hooks that held and moved the body from place to place on the original assembly line.
Item #: 21A2341 -
Metal packing spacer for two-bolt subframe tower to body, pre-1976. Two (2) per car, sold each. Reproduction.
4/20/2018 12:00:00 AM
Item #: SBO0664 -
Specially-shaped plastic liner covers the spare tire and prevents items from contacting the battery. For use in cars with large left-hand fuel tank and no right-hand tank.
Item #: SBO0691/2 -
Repair panel for the stiffener on the end of the bulkhead to inner fender directly in front of the subframe tower bolts; fits external-hinge Minis.
Item #: 41.14.02.05 -
Stiffening panel in the bed of the classic Mini Pickup that extends upward from the wheel arch to support the bed side rail. Use on left or right side.
Item #: 21A2341-USED -
This thick steel spacer is used between the subframe tower and the body. It is found only on dry suspension Minis up to 1975. Available used only.
Item #: CZH3293 -
Complete tailgate for the classic Mini Pickup, less the hinges. A British Motor Heritage product.
Item #: AHA36006 -
Toe board panel with steering rack cradle fitted. Fits all Minis from 1976-on with rubber-mounted front subframe. Not for Mini Clubman models.
Item #: AHA36007 -
Toe board panel, 1990-on. This genuine Heritage panel is used when accident repair is required in the area where the steering rack is attached.
9/5/2017 12:00:00 AM
Item #: SBO0087 -
Inner rear valance for the classic Mini Van, Estate, and Pickup.
Item #: SBO0731 -
Aftermarket windscreen cowl panel. Includes lower part of windscreen pillars. Punched for both right-hand drive (RHD) and left-hand drive (LHD) wiper hole locations.
8/21/2017 12:00:00 AM
Item #: HMP441001 -
This is the panel in front of the windscreen, and includes the lower sections of the windshield pillars. Drilled for both right-hand drive (RHD) and left-hand drive (LHD) wiper locations. Genuine Heritage.
Item #: SBO0028/9 -
Reproduction patch panel to repair the windscreen cowl and/or pillar base; choose right- or left-hand side.
Item #: CZH3140 -
If a serious accident such as a rollover has damaged the metal windshield panel, it can be replaced. Genuine Rover/Heritage.