Glass & Glass Seals

Finishing trim for the stem of the white plastic mirrors used on classic Minis from 1970-on. Fits over the ball socket that hold the mirror head to the mounting stem.

The white rear view mirror was introduced in late 1969 and continued through 1975. It can be fitted to classic Minis up until 1993. Reproduction.

A vintage-looking chrome and polished stainless steel mirror with oversize glass; fits all classic Minis excluding 1997-on MPi. Ref: MSA1147, SS-12.

Light grey 6'' plastic rear view mirror assembly as fitted from Oct 1964 to 1969. Can be fitted to Mk3-on classic Minis through 1993. Ref: 24A1750.

A correct-size reproduction for the smaller original Mk1 classic Mini rear glass opening, with heating element. Ref: 14A7056, 14A7056-HEATED.

A correct-size reproduction for the smaller original Mk1 classic Mini rear glass opening. Ref: 14A7056.

Clear glass that fits only Mk2 and later classic Minis; demisting grid is embedded in the glass. Ref: 13H7323, 13H7321322H0283.

Heated, tinted rear window, with demisting grid embedded in the glass. Fits only Mk2 and later classic Minis.

This screw fits the G283 door lever/handle, as well as the GAM0258/9 mirrors and SAC0079 and SAC0080 bonnet straps. Ref: CMZ312, CMZ0312.

Special flanged screw to retain the updated door handle, as introduced in 1983. Ref: ADU8081, YXX3199PA.

Continuous rubber seal for the classic Mini front windshield. Ref: CZH1719MS, JPC4834, 14A8746.

Front windshield seal version as introduced in 1991, but it will fit earlier classic Minis also. Ref: CCB100130, CCB10011MS.

Seal for fixed quarter windows on late-model classic Minis. Ref: JRC2673.

Original-style sponge rubber window seal for opening quarter-light windows as found on Mk1-Mk2 classic Minis. Ref: ALA5897.

Starting with the Mk3 models, the quarter window seal design became a rubber bulb attached to a vinyl channel. Ref: EAM7724, PAM1019.

Rear glass seal, continuous rubber type; fits Mk1 classic Minis 1959-1967. Ref: 14A8744.

One-piece rear glas seal that fits all classic Minis Mk2-on; must be shortened for use on Mk1 classic Minis. Ref: JRC2674, CDB10017.

Door glass seal that fits window in left- or right-hand rear door of the classic Mini Van and Estate.

T-shaped rubber seal that fits into the lower windshield frame and seals the gap to the body; fits Cagiva- and Portuguese-made Mokes. Ref: ALA7231.

Flat foam seal that fits into the lower windshield frame and seals the gap to the body; fits UK- and Australian-made classic Mini Mokes. Ref: ALA7231-FOAM.

Flexible channel that fits upper channel in the door on sliding-window classic Minis. Ref: 14A7167.

Small screw used to retain the classic Mini's lower window channel into the metal window lock channel. Ref: GHF400, GHF0400, 24A88.

Left-hand side window channel for all roll-up window classic Minis with internal door hinges. Ref: PAM3077, CZH4156.

Right-hand side window channel for all roll-up window classic Minis with internal door hinges. Ref: PAM3076, CZH4155.

Rigid vertical dual channel for sealing rear side windows in classic Mini Estate models. Fits forward location only.

Rigid dual-channel vertical window glass seal for rear of side windows in classic Mini Estate models. Ref: 14A7630.

Rubber channel (seal) to fit in metal door glass lift brackets; four (4) required per car. Ref: 24A948, 24A0948.

This chrome plastic bezel replaces the standard one to brighten up the interior; fits all Mk3 and later classic Minis. Ref: G281, CZH701.

Black plastic collar between the handle and door panel upholstery; fits Mk3-on classic Minis. Sold each.

Small plastic plug to conceal the screw in late Mini window cranks. Ref: YXX3200PA, YXX3200LN.

New rear clear glass pane for Mk1-2 classic Mini door window. Drilled for two window lock holes. Ref: 14A7810.

Round fiber washer that fits under the chrome window lock boss on the outside of the glass. Ref: 14A7065, 14A7065B.

Chrome button on the outside of the glass. Ref: 14A8151.

Stainless lower window channel lock rail for sliding window doors, as supplied on Mk1 classic Minis until May 1963. Ref: 14A6769, 14A6770.

Chrome lower window channel for sliding window doors. Ref: 24A1303, 24A1304

Complete plastic window lock set for all 2-hole sliding windows as found on Mk1-Mk2 classic Mini doors. Ref: MSSK015, 24A1194, 24A1195, 24A1196, 24A1197.

Set of restoration-quality metal window locks, originally used 1959-1962 but can be fitted to any sliding-window model classic Mini. Ref: MSSK015M, SBO0100.

Pozidrive screw to attach the window lock to the chrome boss. Ref: RMP307, RMP0307.

Molded plastic seal that sits under the window lock to prevent rattles and the entry of water; fits all four window locks. Ref: 24A1198.

Fold-up chrome window lock for the sliding windows on the rear/side of the classic Mini and (classic) Clubman Estate. Sold each.

Fold-up chrome window lock with plastic latch for the sliding windows on the rear/side of the classic Mini Estate (all models).

Plastic window lock as used on Mk1 and Mk2 classic Minis; fits the 2-hole glass, left front. Ref: 24A1195.

Plastic window lock as used on Mk1 and Mk2 classic Minis; for right front glass. Ref: 24A1194.

Plastic window lock as used on Mk1 and Mk2 classic Minis; fits the 2-hole glass, left rear. Ref: 24A1197.

Plastic window lock as used on Mk1 and Mk2 classic Minis; fits the 2-hole glass, right rear. Ref: 24A1196.

This is the internal door mechanism to raise and lower classic Mini roll-up windows. Ref: CZH646, CZH647.

Small metal chrome cover for windscreen seal filler strip insert. Ref: JPC2017.

Chrome filler strip to help seat both the front and rear windscreens on the classic Mini. Ref: 24A1466, SBO0027C.