Door & Window Trim

Clip retains Mk3 window scraper and also door pocket trim. Ref: ADH3809.

This simple trim was originally fitted the the inside lip of the Mk1 and Mk2 doors, just below the windows and above the interior door handle. Ref: 24A1517.

Stamped aluminum trim to protect the front end of the Mk1-2 classic Mini door pocket. Ref: 14A7176, 14A7177.

A curved metal molding finishes the top edge of the Mk1 and Mk2 classic Mini door pocket. Ref: 24A1169.

Straight chrome molding on the outside of the door as found on classic Mini Deluxe and Cooper models. Ref: 24A341, 24A342.

Stainless steel molding on the outside of the Mk1/Mk2 classic Mini sliding window. Ref: 14A9773, 14A9774.

The Mk3 classic Mini Cooper S model had a stainless trim over the door window, and this is a nice upgrade that can be made to all roll-up window cars. Supplied with fixing rivets; plain doors must be drilled to install.

Outer scraper seal/trim introduced in 1981 and generally used to retrofit to earlier Mk3-on cars in lieu of the original version, which did not have rubber safety tips. Ref: PAM1014, PAM1015.

Original-design outer door scraper seal/trim, with no rubber safety tips on the ends. Ref: CZH1666, CZH1667.

Black plastic trim to finish the roof gutter edge; fits pre-1979 classic Mini models best. Ref: MT633, YGA1106, YGA1107.

Roll of plastic trim with shiny silver ''chrome'' insert to cover the rain gutter; works best with pre-1979 classic Minis which did not come with a rain gutter. Ref: MT632, YGA1106.

The lower window trim strip is held in place by these clips, which attach to the sheet metal below the window opening. Ref: 13H525, 13H0525.

Clip with rivet that holds the stainless steel trim on the upper door frame on Mk1 and Mk2 classic Mini Cooper S plus Riley Elf.

Round, button-shaped clip with an integral rivet; fits in holes around the upper door window frame.

Clip used to hold the upper window chrome, except at the very bottoms of each leg, where three each of the 13H0744 are used.