Products 1-39 of 39
Item #: LOGO1 -
Green "Mini" stick-on badge that fits the flat area of a wheel center cap or bonnet badge; 42mm diameter.
Item #: LOGO4 -
Stick-on badge with "Union Jack" logo to fit the flat area of a wheel center cap or bonnet badge; 42mm diameter.
Item #: LOGO2 -
Stick-on badge fits the flat area of a wheel center cap or bonnet badge. 42mm diameter. Sold individually.
Item #: SWT0078 -
Reproduction center cap for GB wheel, fits currently produced and original GB wheels. Plastic cap with GB logo. Sold each.
Item #: C-21A1908 -
Replacement center cap for 6"x10" Genuine Minilites manufactured from the 1990s-on. 50mm tall. Sold each.
Item #: STICKER21 -
Wheel center cap sticker, Mini Cooper laurel; self-adhesive, approx. 2" (50mm) wide.
Item #: W3 -
Flat washer to use with SWT0068 sleeve nut.? Requires flat?washer seating?surface on wheel face.? Note both flat and tapered washers shown in the second photo for comparison.? Choose whichever is
Item #: 88G0337 -
Originally used on the Cooper S and other Mini models, these are a traditional design that looks great on the stock steel wheels. Long life chrome over stainless. Sold
Item #: 88G0337S -
The "baby moon" hubcap design was used on the Cooper S and other Mini models. Looks great on the standard steel wheels. Sold each. For chrome plated
Item #: SWT0120 -
These bullet-shaped lug nuts bring a fresh look and also offer improved security. Designed to be used on any wheel with a 60 degree tapered nut seat on the wheel itself; removed with a hex tool (included) that fits internally, so they cannot be removed with conventional sockets.
Item #: 88G0322 -
Stock lug nut to fit all Minis with 10" steel wheels. This includes the original 850 wheels through the slotted Mini Cooper S wheels. Sold individually.
Item #: SWT0039S -
Special sleeve nut with .850" shank length under head of nut. For 3/8" stud and fits .625" bore holes in wheels such as Minilite 5x10. Includes heavy-duty flat washer. Sold
Item #: 113087 -
60 degree taper lug nut to fit 12" steel wheel. Sold each.
Item #: SWT0102-1 -
The 60-degree tapered lug is mainly used 12" and 13" wheels, including Superlight. Sold each.
Item #: SWT0102 -
A new set of chrome acorn nuts can improve the look of your older aftermarket wheels. The 60-degree taper is mainly found 12" and 13" wheels, including Superlight. Set of
Item #: SWT0024-1 -
Chrome nuts can improve the look of your older aftermarket or stock steel wheels. Called "acorn" or "dome" nuts because they conceal the stud.
Item #: SWT0024 -
A new set of chrome nuts can improve the look of your older aftermarket or stock steel wheels. Called "acorn" or "dome" nuts becuase they conceal the stud. These radiused
Item #: SWT0039L -
Special long sleeve nut with 1.5" shank length under head of nut. For 3/8" stud and fits .625" bore holes in wheels such as Minilite 6x10. Includes heavy-duty flat washer.
Item #: NAM9075 -
Lug nut for 12" & 13" Rover factory alloy "Minilite style" wheels as fitted to many Minis from 1984-on. Sold each.
Item #: SWT0160 -
A less-expensive and more practical replacement for the NAM9075 lug nut. Fits the Rover Minilite-syle wheels, but is a chrome nut that does not use the troublesome stainless cover.
Item #: SWT0068 -
A chrome sleeve nut to fit several old UK made wheels, such as Dunlop. It also fits genuine Minilite 4.5x10 and 5x10, but the .60" shank length beneath the washer
Item #: SWT0120-1 -
Bullet-shaped nut designed to be used on any wheel with a 60 degree tapered seat on the wheel itself.
Item #: SWT0026 -
Chrome lug nut to fit 10" steel wheel, or aluminum wheel with radius seat.
Item #: SWT0029 -
Chrome sleeve nut for Mamba and early Revolution wheels.? Fits 9/16" wheel bore. for use with 3/8" stud.? Shank length is 1.25".? Includes plated flat washer.? Sold each. For lowest
Item #: SWT0097 -
Tired of flaking chrome nuts detracting from the spiffy appearance of your Mamba or 10" and 12" Revolution wheels? End the aggro with stainless sleeve nuts. These fit a
Item #: SWT0071M -
Plated sleeve nut in 11/16" shank diameter for Revolution wheels. Usually in 1.25" to 1.375" shank length, depending on supplier availability. Includes washer. Fits 3/8" studs only. Sold each.
Item #: SWT0120-T -
This is the special socket that is included in SWT0120 Tuner Lug Nut Set. Keep one in the tool box and carry one in the car for emergencies.
Item #: 14A6511 -
Round spare wheel clamp with bolt to hold your spare tire in the boot. Bolts to the spare wheel boss as fitted to Mk1 Minis. Boss is also available as
Item #: ALA7215 -
The Moke's spare tire is bolted to the rear panel with this special bolt and collar assembly.
Item #: W4 -
Tapered washer to use with SWT0068 sleeve nut. Requires tapered washer seating surface on wheel face. Note both flat and tapered washers shown in the second photo for comparison. Choose
6/1/2017 12:00:00 AM 24.95
Item #: DTC100690 -
Center cap with Mini Cooper wreath logo on silver. Fits 12" and 13" Rover-supplied MiniLite style wheels.
Item #: DTC100680 -
Replacement center cap for 12" and 13" Rover Minilite wheels. Green Mini text logo.
Item #: C-21A1969 -
Stainless steel sleeve-type lug nut for the Minilife (Minilite copy) wheel. Diameter is .605", shank length is .640". Includes plated tapered washer.
Item #: SSS0010 -
Wheel spacers, 3/4" thick, for rear wheels. Come complete with longer wheel studs. Sold in pairs.
Item #: SSS0022 -
Wheel spacers, 1" thick, for rear wheels. Comes complete with longer wheel studs. Sold in pairs.
Item #: SSS0007 -
Wheel spacers, 3/8" thick, for rear wheels. Come complete with longer wheel studs. Sold in pairs.
Item #: SR4 -
Wheel spacers, 3/16" thick, primarily for rear wheels but can also be used on the front. Sold in pairs. Work with stock-length studs.
Item #: SSS0009 -
Wheel spacers, 1/8" thick, primarily for rear wheels but can also be used on the front. Sold in pairs. Work with stock-length studs.
Item #: SP1 -
Cast aluminum spacers, ideal for spacing your wheels outward for clearance or to achieve a wide-stance look.