Body & Trim

Stiffening panel in the bed of the classic Mini Pickup that extends upward from the wheel arch to support the bed side rail. Use on left or right side.

Mk3-on door jamb striker finisher plate; originally these were -handed, but now are universal fit.

Original-type factory brackets as used on all late-style sun visors from 1966-on; slide into both ends of the visor. Ref: SV2021.

Sun visor in black with integral mirror. As used from 1966-on. Fits either side, sold each. Hardware/hinges sold separately, see SV2021.

Sun visor in cream crackle, with mirror as used from 1970-on. Fits either side, sold each.

Sun visor in light grey with integral mirror as used from 1970-on. Sold each, fit either side. Hardware/hinges sold separately, see SV2021.

Sun visor in white, with mirror as used from 1970-on. Fits either side, sold each.

Sun visor in white with black back, with mirror on black side, as used from 1970-on. Ref: SV2017, 2017WA, SV2017WA.

This was the first style of sun visor used on the very early Minis (1959-Oct 64) and was finished in the matching color to the headlining. Ref: SV2000, SV2000W, SV2000Z, SV2000F.

The first style of sunvisor used on the very early Minis (1959-1964), and and finished in colors to match the headlining.

This more substantial sun visor pad was introduced from 1964 thru 1971. It was more padded and larger and has a fancy chromed swivel bracket on one end which attaches to the body and a plastic peg at the other end.

Sun visor pad as used from 1964 thru 1971, with chromed side-swivel bracket on one end and plastic peg on the other.

Black sun visor pad only without mirror. Fits either side. Ref: SV2016, SV2016A.

Sun visor pad only in cream crackle, without mirror. Fits either side, sold each. Use SV2021 hardware/hinge set.

Plain sun visor in grey as used from 1970-on. Fits either side, sold each. Ref: SV2016, SV2016P.

Plain sun visor in white, as used in Classic Minis 1970-on. Fits either side. Ref: SV2016WW.

Plain sun visor in white with black back, as used from 1970-on. Newton Commercial. Ref: SV2016W, SV2016WA, SV2016.

Switch and cable panel for pre-1963 Mk1 Mini and Cooper models. Old English White finish. Ref: ADA3740, 14E3386.

Switch panel for the later Mk1 classic Mini models 1959-1967. Grey. Ref: 14E3386.

Switch panel in black as used in Mk1-on classic Mini Vans and Pickups with recirculating heater. Black finish. Ref: 24E7298.

Switch plate fits classic Mini Vans and Pickups 1968-1970, and screws directly to the lower dash rail. Ref: 24E7299.

Lower dash rail switch panel as fitted to Mk2 cars and early Mk3, when the ignition switch was found in the center. Ref: ALE2960.

Switch panel for approximately 1970-1975 Mini with locking ignition switch on top of the column.

This switch mounting panel accepts four of the smaller rocker switches as used from about 1976-on. Ref: JPC2839, CZH4104.

Center dash switch panel in the style used from about 1976-on, with five (5) switch holes. Ref: FBX10012.

Black-painted steel mounting pod for 80mm tachometer. Will mount on any flat surface.

Steel mounting pod for 80mm tachometer. Shallower than others, for mounting in confined areas.

Deluxe black wrinkle-finish steel mounting pod for 80mm tachometer. Adjustable swivel mount. Ref: TACH01, SEL0033.

80mm genuine Smiths 8000 RPM tachometer with chrome bezel. Ref: SIB120, SIB120MG.

Rubber seal between lamp base and body on Mk2 classic Mini Saloons. Ref: 37H2689, 37H2690.

Left-hand side rubber gasket for lamp base-to-body on Mk4 and later classic Mini Saloons with reverse lights. Ref: 37H2691, 54590554.

Right-hand side rubber gasket for lamp base-to-body on Mk4 and later classic Mini Saloons with reverse lights. Ref: 37H2692, 54590555.

Tailgate stays for the classic Mini Pickup; these support the tailgate when in the opened position and prevent it from opening too far. Ref: 14A7761, 14A7762.

Complete tailgate for the classic Mini Pickup, less the hinges, made by British Motor Heritage. Ref: CZH3293, CZH3293/HTG.

Flanged rubber grommet that fits around the fuel tank neck to seal the hole and to prevent vibration. Ref: 14A7057, 14A7057E.

Rubber grommet fits around the tank neck to seal the hole and to prevent vibration. Original-type as used pre-1997. Ref: 14A7057, 14A7057GENUINE.

Thin, flat rubber tank neck grommet, designed for use with the revised tank neck of the MPi classic Mini. Ref: WGG100010.

Toe board panel with steering rack cradle fitted; fits classic Minis from 1976-on with rubber-mounted front subframe. Ref: AHA36006.

Toe board panel, 1990-on. This genuine Heritage panel is used when accident repair is required in the area where the steering rack is attached.

Quality reproduction eyebolts, welded so they don't pull open under strain. Ref: 21A1241, 21A1220.

Heavy-duty tow eye for the front of the classic Mini. Attaches to the front subframe through the large hole below the front bumper. Ref: FAM1785, KPU100160.

Extra heavy-duty and long tow eye for use with front air dam. Ref: C-SRP201.

Tow eye that bolts to the underside of the rear subframe. Ref: 21A1220R, FOR041, 21A1220.

As found on the classic Minis of the 1960s. These aluminum door tread plates help retain the rubber door seal at the botto. Small "polka-dot" pattern is embossed into the metal. Sold per pair.

This small flexible chrome finisher installs on the bare metal edge of the upper chrome grille trim to stop it from scratching the paint.

Classic Mini Mk3-on concealed upper door hinges; choose left- or right-hand side. Ref: CZH202, CZH203, CZH202MS, CZH203MS.

Flexible channel that fits upper channel in the door on sliding-window classic Minis. Ref: 14A7167.

Inner rear valance body panel for the classic Mini Van, Estate, and Pickup; reproduction.