Roll-Up Window Door Accessories

Made especially for the roll-up window classic Mini, these deflectors install by fitting into upper window channels. Sold per pair.

Set includes both roll-up window door exterior handles and boot handle with matching locks/keys, for Mk3-on classic Minis. Ref: CZH1785.

Plastic door window crank handle for classic MInis up to 1982, with large hex drive to attach to the window regulator. Ref: CZA7109.

This chrome-plated metal handle fits the hex drive of the window regulator. Rubber knob. A nice enhancement to any interior. Sold each.

Black plastic collar between the handle and door panel upholstery; fits Mk3-on classic Minis. Sold each.

Plastic door pull as fitted to early roll-up window cars. Includes chrome metal brackets at each end. Sold as an assembly, two required per car.

Black plastic door handle with chrome bezel. Fits all roll-up window doors on UK classic Minis up to 1996. Ref: 34G2529, JPC8387PA.

Striker plate with metal loop to engage the door lock assembly; fits either side. Ref: CZH627, CZH0627.

Set of three matching lock barrels for both door handles and the boot handle on any Mk3-on (roll-up) window car. Includes two keys.

Door window crank handle with a spring-loaded winder knob, as fitted 1983-on. Ref: YXX3199PA, YXX3199LNF.

Special flanged screw to retain the updated door handle, as introduced in 1983. Ref: ADU8081, YXX3199PA.

Complete set of replacement all-chrome metal interior hardware for roll-up window U.K. Mk3 doors. Ref: MSA507.

Protect your paint job from scratches make by your rings and fingernails. Polished stainless door shields fit in the dish behind the door handle.

This is the internal door mechanism to raise and lower classic Mini roll-up windows. Ref: CZH646, CZH647.

British Pozidrive screw for the door latch assembly on roll-up window classic Minis. Ref: SF604101.

Flanged screw for classic Mini door window crank CZA7109.

Window crank with square post for Riley Elf, MG1100 and Austin America; also fits Australian Minis with roll-up windows. Ref: 34G2528, ADA5667.

Screw used to hold together the two halves of the disc shields on all classic Mini front discs, as well as retaining the boot lid cable to the bootlid, and used on various door handles and door remote link.

Used striker plate assembly with metal loop to engage the door lock assembly; includes face plate. Ref: U-CZH627, CZH627, CZH0627, CZH0627-USED.

This square plastic insert accepts a #8 screw, and is used in various places on the classic Mini

Classic Mini Mk3-on concealed upper door hinges; choose left- or right-hand side. Ref: CZH202, CZH203, CZH202MS, CZH203MS.

Universal lower door hinge for roll-up window classic Mini doors; fits both left and right sides. Ref: CZH212MS, CZH212.

Thick metal backing plate to support the studs of Mk3-on classic Mini door hinges. Ref: ALA6381.

Door hinge shim for roll-up window classic Minis, used to align the door. Choose 0.05mm-0.07mm or 1.2mm thick stainless steel. Sold each.

Handy plastic door bin that screws to bottom of the roll-up window door. Fits classic Minis 1970-2000 (excluding Innocenti). Ref: YGA452, YGA0452.

Modern bulb seal design with vinyl-covered u-channel to fit the door opening flange on all internal-hinge classic Minis. Ref: CGA2835, CGA2835MS, CFB10047.

Specially-shaped seal keeps water out of the door check arm opening; right-hand side. Ref: CZH4052.

Specially-shaped seal keeps water out of the check arm opening. Left-hand side. Ref: CZH4053.

Outer scraper seal/trim introduced in 1981 and generally used to retrofit to earlier Mk3-on cars in lieu of the original version, which did not have rubber safety tips. Ref: PAM1014, PAM1015.

Rubber seal for door check after 1986; choose right- or left-hand side.

Original-design outer door scraper seal/trim, with no rubber safety tips on the ends. Ref: CZH1666, CZH1667.

Clip to attach inner guide found on all classic Mini roll-up window doors. Ref: EYC10048, AAU8399.

Right-hand side window channel for all roll-up window classic Minis with internal door hinges. Ref: PAM3076, CZH4155.

Left-hand side window channel for all roll-up window classic Minis with internal door hinges. Ref: PAM3077, CZH4156.

OEM-spec metal channel that supports the roll-up window glass and connects it to the arm of the window regulator. Ref: ALA5746, ALA5747.

Rubber channel (seal) to fit in metal door glass lift brackets; four (4) required per car. Ref: 24A948, 24A0948.

32'' chrome and rubber inner door window scraper/seal for roll-up window classic Minis; fits either side. Ref: EJU10003, CZH3576, JPC8153.

A pair of channels to support the door glass in Mk3 and later classic Minis. Ref: ALA5746, ALA5747, MSSK2105.

A pair of channels to support the door glass in Mk3 and later classic Minis; includes rubber seals. Ref: MSSK2105, 24A948, ALA5746, ALA5747.

Late classic Mini doors have a nutsert set into the sheet metal for the rearview mirrors. These are the nutserts to install a mirror. Sold each.

Complete A-post inner closing (boxing) panel for roll-up window classic Minis; includes skin and internal bracket. Ref: ALA5688, ALA5689, ALA5688/HTG, ALA5689/HTG.

FS key blank, as used on most door and boot handles, as well as dash-mounted ignition switches. Ref: 17H2475, KEY1.

Carpeted boot board for twin-tank classic Minis 1962-1980, in-stock selected colors. Ref: CK952, CLK952A.

Plastic clip commonly used by Rover for all interior car trimming. Ref: GFK7509, GHF1222, GHF1220, CZK3631.

Check arm with stop to prevent the classic Mini roll-up window door from swinging too far open. Fits either side. Ref: ADA5671, CLZ412.

Main door lock assembly for classic Minis with roll-up windows only. Ref: CZH3528, CZH3529.

Clevis pin used in conjunction with door check arm ADA5671, on all classic Minis with roll-up windows from 1970 to 2000. Ref: CLZ412, CLZ0412.

Mk3-on door jamb striker finisher plate; originally these were -handed, but now are universal fit.