Cooling Systems

Special upper radiator bracket as used on 1275 classic Mini Cooper S models. Ref: 12G617, CAM4622, 12G0617.

Stainless steel reproduction of the 1275 Cooper S upper radiator bracket. Ref: 12G617S, 12G617, 12G0617S.

Longer version of the classic Mini upper radiator bracket, as used on the Clubman 127GT. Ref: 12G2453, CAM4621.

Upper radiator bracket used on 1990-1996 classic Minis fitted with a sandwich plate under the thermostat housing, and a single mounting point at the thermostat end. Ref: PCU10135.

Upper radiator bracket between the radiator and cylinder head on small bore classic Minis

Upper radiator bracket as fitted to the 970 and 1071 classic Mini Cooper S models; accomodates the shorter block height of the smaller Cooper S engines. Ref: 12G323, 12G0323.

10lb short-stem radiator cap for later-model classic Minis. Ref: GRC109, GRC130, FC50, GRC0109.

Classic Mini radiator cap, short-stem 13lb for later models (up to 2000). Ref: GRC111, FC55, GRC0111.

15lb radiator cap with rubber seal under the cap to ensure an airtight fit. Ref: GRC207.

15lb late classic Mini model radiator cap with the short insert. Ref: GRC110, GRC0110, GRC1110, FC53.

This 7lb early radiator cap is longer than the later, shorter caps. Ref: GRC101, GRC0101, FC41A, MRC41A.

Shorter-length classic Mini radiator cap with a 7lb. pressure rating. Ref: GRC102, FC43A, MRC43A, GRC0112.

Flat radiator cap, typically used with a pressurized expansion tank. Made in England. Ref: GRC201, GRC0201, FC57, MRC57.

Bracket for converting early classic Mini (two-piece) lower radiator housing to Cooper/S spec.

This is the bolt that goes through ARP1073 spacer on lower radiator mount on classic Minis from 1974 with a one piece cowl. Ref: 12G4270.

Drain tap to fit very early radiators that have a plug in the bottom tank. Can be professionally installed by a radiator shop into a newer radiator

Push-in fan control switch with seal for SPi (single-point injection) classic Mini radiators. Ref: GVS104, CDU1500, GVS198.

Special screw-in fan control switch at the bottom of C-ARA4443 2-core radiator for 1992-on SPi classic Minis. Ref: C-ARA4445.

Rubber grommet for stepped radiator bolt. Ref: 11G227, 11G0227, CAM4414.

Lower radiator support grommet for 1997-2000 MPi classic Minis, with the radiator mounted in the front. Two (2) required, sold each.

Upper radiator mounting grommet for 1997-2000 MPi classic Minis, with the radiator mounted in the front. Two (2) required, sold each.

Plated wire clamp as used on many British cars up until the 1980s; high-quality reproduction. Ref: CS4020.

Plated wire clamps were used on many British cars up until the 80s. This reproduction clamp is of high quality and will add that final touch to any restoration.

Black silicone radiator hose kit to fit any 1275 classic Mini with heater up to 1989, with the control valve directly on the cylinder head. Ref: C-GRH002BLACK, C-GRH002B.

Blue silicone radiator hose kit to fit any 1275 classic Mini with heater up to 1989, with the control valve directly on the cylinder head. Ref: C-GRH002.

Upper and lower Kevlar reinforced radiator hoses for 1275cc pre-1990 classic Minis. Ref: GRH240KEVLAR, GRH247KEVLAR.

Red silicone radiator hose kit to fit any 1275 classic Mini with heater up to 1989, with the control valve directly on the cylinder head. Ref: C-GRH002RED, C-GRH002R.

Blue silicone radiator hose kit for all MPi classic Minis, and includes top and bottom radiator hoses. Ref: C-GRH006.

Silicone radiator hose kit for all MPi classic Minis; includes top and bottom radiator hoses. Ref: C-GRH006, C-GRH006BLACK, C-GRH006RED.

Standard rubber lower radiator hose with heater take-off, for non-fuel injected classic Mini and Mini Cooper. Ref: GRH240, GRH240MS, GRH240E.

Special lower radiator hose with molded extension; fits 1990-on classic Minis with HIF44 carb. Ref: PCH10476EVA, GRH1159.

Special lower radiator hose with molded extension, for HIF38-only carburetor-equipped Minis from 1991-1994. Ref: PCH10780EVA, GRH1289.

Lower radiator hose, extra strong, with Kevlar-reinforcing fibers. Ref: GRH240KEVLAR.

Radiator hose that fits MPi classic Minis with front-mount radiator. Ref: GRH1466, PCH113480EVA.

Lower radiator hose, fits most classic Minis with aluminum pump, but has no spud for heater take-off. Ref: GRH802, GRH0802, 12A1551, RH917.

Standard lower radiator hose with heater take-off, for non-fuel injected classic Mini and Mini Cooper, in long-lasting silicone. Ref: C-GRH240, C-GRH240B.

Standard lower radiator hose with heater take-off, for non-fuel injected classic Mini and Mini Cooper, in long-lasting red silicone. Ref: C-GRH240RED.

Factory lower radiator hose for SPi (single-point injection) engines with side-mounted radiators. Ref: GRH1242, PCH10735EVA.

Blue silicone lower radiator hose for single-point injection (SPi) classic Mini engines with side radiator. Ref: C-GRH1242, GRH1242.

Silicone heater hose, 39'' for classic Minis with the original heater valve bolted on the cylinder head. Choose black, blue, or red.

Silicone heater hose, 42'' for classic Minis with the original heater valve bolted on the cylinder head. Choose from back, blue, or red.

Special hose from thermostat housing to the heater valve and manifold on U.K.-market SPi classic Minis only. Ref: PCH10532, GRH1216.

T-shaped hose for Japanese-spec fuel-injected classic Minis. Goes from thermostat sandwich plate to intake manifold and heater valve.

Upper ?-shaped radiator hose for most 1275cc heads, in standard rubber. Ref: GRH247, GRH247E.

Upper radiator hose for the classic Mini Clubman 1275GT, or any classic Clubman model with a 1275cc engine. Ref: GRH469, GRH469KEVLAR.

Upper radiator hose for 1275 before 1990's Cooper. Kevlar-reinforced for extra strength and heat-resistance. Ref: GRH247KEVLAR.

Upper ?-shaped radiator hose for most 1275cc heads in black silicone material for long life and easy installation. Ref: C-GRH247BLACK, C-GRH247B, GRH247.

Upper ?-shaped radiator hose for most 1275cc heads in blue silicone material for long life and easy installation. Ref: C-GRH247BLUE, C-GRH247, GRH247.