All Products

Wheel spacers pair, 1'' thick, recommended for rear wheels only. Includes longer-than-standard wheel studs. Ref: CW16, SSS0022.

Wheel spacers, 3/8'' thick, for rear wheels. Come complete with longer wheel studs. Ref: CW1, SP21, SSS0007.

Wheel spacers, approximately 5mm to 6mm thick, primarily for rear wheels but can also be used on the front. Ref: SR4.

Wheel spacers, 1/8'' thick, primarily for rear wheels but can also be used on the front. Ref: SR3, SSS0009.

Common wheel stud as used on front and rear of drum brake classic Minis, and front of Cooper and Cooper S. Ref: 21A2064, BTA339, NAM5645.

Longer-than-standard wheel stud often used with non-standard wheels or when spacers are used. Ref: 21A2064L, ATA7085.

Standard-length stud for rear drums with built in .75'' spacer; threaded length .75''. Ref: 21A1278, RLJ10001

Wheel stud version with long threaded length to accomodate longer sleeve nuts used on wheels with thick centers. Ref: 21A1278LT, ENJO-1039.

The longest normal stud in standard 3/8'' diameter for rear suspension; stud is 78mm long, with 27mm threaded. Ref: ENJO-1040.

Made especially for the roll-up window classic Mini, these deflectors install by fitting into upper window channels. Sold per pair.

Protective aluminum oil spray shield designed to fit rod-change gearboxes, but can fit 4-synchro remote shift boxes with modifications. Ref: WIND01, MSKWBT, M8007.

Small screw used to retain the classic Mini's lower window channel into the metal window lock channel. Ref: GHF400, GHF0400, 24A88.

Left-hand side window channel for all roll-up window classic Minis with internal door hinges. Ref: PAM3077, CZH4156.

Right-hand side window channel for all roll-up window classic Minis with internal door hinges. Ref: PAM3076, CZH4155.

Rigid vertical dual channel for sealing rear side windows in classic Mini Estate models. Fits forward location only.

Rigid dual-channel vertical window glass seal for rear of side windows in classic Mini Estate models. Ref: 14A7630.

Rubber channel (seal) to fit in metal door glass lift brackets; four (4) required per car. Ref: 24A948, 24A0948.

This chrome plastic bezel replaces the standard one to brighten up the interior; fits all Mk3 and later classic Minis. Ref: G281, CZH701.

Black plastic collar between the handle and door panel upholstery; fits Mk3-on classic Minis. Sold each.

Small plastic plug to conceal the screw in late Mini window cranks. Ref: YXX3200PA, YXX3200LN.

New rear clear glass pane for Mk1-2 classic Mini door window. Drilled for two window lock holes. Ref: 14A7810.

Round fiber washer that fits under the chrome window lock boss on the outside of the glass. Ref: 14A7065, 14A7065B.

Chrome button on the outside of the glass. Ref: 14A8151.

Stainless lower window channel lock rail for sliding window doors, as supplied on Mk1 classic Minis until May 1963. Ref: 14A6769, 14A6770.

Chrome lower window channel for sliding window doors. Ref: 24A1303, 24A1304

Complete plastic window lock set for all 2-hole sliding windows as found on Mk1-Mk2 classic Mini doors. Ref: MSSK015, 24A1194, 24A1195, 24A1196, 24A1197.

Set of restoration-quality metal window locks, originally used 1959-1962 but can be fitted to any sliding-window model classic Mini. Ref: MSSK015M, SBO0100.

Pozidrive screw to attach the window lock to the chrome boss. Ref: RMP307, RMP0307.

Molded plastic seal that sits under the window lock to prevent rattles and the entry of water; fits all four window locks. Ref: 24A1198.

Fold-up chrome window lock for the sliding windows on the rear/side of the classic Mini and (classic) Clubman Estate. Sold each.

Fold-up chrome window lock with plastic latch for the sliding windows on the rear/side of the classic Mini Estate (all models).

Plastic window lock as used on Mk1 and Mk2 classic Minis; fits the 2-hole glass, left front. Ref: 24A1195.

Plastic window lock as used on Mk1 and Mk2 classic Minis; for right front glass. Ref: 24A1194.

Plastic window lock as used on Mk1 and Mk2 classic Minis; fits the 2-hole glass, left rear. Ref: 24A1197.

Plastic window lock as used on Mk1 and Mk2 classic Minis; fits the 2-hole glass, right rear. Ref: 24A1196.

The lower window trim strip is held in place by these clips, which attach to the sheet metal below the window opening. Ref: 13H525, 13H0525.

This is the internal door mechanism to raise and lower classic Mini roll-up windows. Ref: CZH646, CZH647.

Clip with rivet that holds the stainless steel trim on the upper door frame on Mk1 and Mk2 classic Mini Cooper S plus Riley Elf.

Round, button-shaped clip with an integral rivet; fits in holes around the upper door window frame.

Clip used to hold the upper window chrome, except at the very bottoms of each leg, where three each of the 13H0744 are used.

Aftermarket windscreen cowl panel. Includes lower part of windscreen pillars. Ref: HMP441001MS, SBO0731.

This is the panel in front of the windscreen, and includes the lower sections of the windshield pillars; genuine Heritage. Ref: HMP441001.

Patch panel to repair the windscreen cowl and/or pillar base. Ref: MS6R, MS6L, SBO0028, SBO0029.

Small metal chrome cover for windscreen seal filler strip insert. Ref: JPC2017.

Chrome filler strip to help seat both the front and rear windscreens on the classic Mini. Ref: 24A1466, SBO0027C.

Black filler strip to help seat both the front and rear windscreens on the classic Mini. Ref: SBO0027B, PW5013, PV302, 24A1466.

Three-piece classic Mini Moke windscreen full seal set; includes glazing and frame-mounting seals.

The rubber bottom seal piece for the classic Mini Moke windshield. Ref: MYH5096.