Sliding Window Door Accessories

Chrome Pozidrive screws for the door restraint straps; use eight (8) per car.

Interior door latch assembly, as used on left-hand drive classic Minis. Ref: 24A2143, 24A2146.

Interior door latch assembly, as used on right-hand drive classic Minis. Ref: 24A2144, 24A2145.

Screw with special fine threads to secure the interior door latch to the door on Mk1-2 classic Mini models.

Stair-stepped striker on the b-post that receives the tongue of the door latch when the door is closed. Ref: 14A6832, 14A6832MS.

This is the u-shaped metal receiver on the b-post that accepts the nylon alignment buffer when the door is closed.

The very correct and proper British screw for the door striker plate on Mk1 and Mk2 classic Mini, Van, and Pickup.

Nylon door wedge buffer, to fit all sliding-window doors.

One of the quaint features of the Mk1-2 Mini models was the door check straps to prevent the doors from swinging too far.

This small metal plate fits in a recess of the 14A6833 alignment buffer for fastening it to the door frame. Ref: 14A6834.

Screw for nylon door buffer receiver 14A6835, as used on external hinge/sliding window classic Minis. Ref: CMZ204.

Small ''u''-shaped bracket located inside the door frame that the nylon door buffer screws into.

Felt pad/gasket that sits between the door lock and door on external hinge classic Mini doors

Rubber gasket to seal the door handle base (escutcheon) from water entry; can also be used on selected boot handles. Ref: ADA3817.

Small rubber seating gasket under the door handle safety boss. Ref: 24A1835.

Stainless steel molding on the outside of the Mk1/Mk2 classic Mini sliding window. Ref: 14A9773, 14A9774.

Round, button-shaped clip with an integral rivet; fits in holes around the upper door window frame.

Straight chrome molding on the outside of the door as found on classic Mini Deluxe and Cooper models. Ref: 24A341, 24A342.

The lower window trim strip is held in place by these clips, which attach to the sheet metal below the window opening. Ref: 13H525, 13H0525.

Stamped aluminum trim to protect the front end of the Mk1-2 classic Mini door pocket. Ref: 14A7176, 14A7177.

A curved metal molding finishes the top edge of the Mk1 and Mk2 classic Mini door pocket. Ref: 24A1169.

Clip retains Mk3 window scraper and also door pocket trim. Ref: ADH3809.

Clip with rivet that holds the stainless steel trim on the upper door frame on Mk1 and Mk2 classic Mini Cooper S plus Riley Elf.

Clip used to hold the upper window chrome, except at the very bottoms of each leg, where three each of the 13H0744 are used.

This simple trim was originally fitted the the inside lip of the Mk1 and Mk2 doors, just below the windows and above the interior door handle. Ref: 24A1517.