Heritage/Rover Products

Full-length right-hand inner fender for classic Minis with roll-up windows/concealed door hinges. Ref: ABD36004, ABD36004/HTG.

The front panel normally has a ''stiffener'' or support bracket spanning the grille opening to provide reinforcement.

Left-hand front inner wing repair section with the radiator slats only, as used on 1959-1989 Minis saloons.

Left-side Mk3 classic Mini inner fender wing panel with grille slats for the radiator cooling. Ref: ALA6475.

Original-spec right-hand side door for late roll-up window classic Minis. Ref: BDA360100, BDA360100/HTG, CZH3074.

Original-spec left-hand side door for late roll-up window classic Minis. Ref: BDA360110, BDA360110/HTG, CZH3075.

Heritage Mk3-on door skin that replaces the original, exactly as new. Must be welded to the old frame. Ref: CZH3300, CZH3301.

Classic Mini Mk3-on right-hand door only, for models to 1989. Ref: BMP326, BMP0326.

Mk3-on LH door for cars to 1989. Does not include integral safety bar, and hinges are not included.

Repair body panel for Mk3 and later classic Minis; includes the A-post, door step and the bottom part of the B-post. Ref: HMP441012, HMP441013, HMP441012/HTG, HMP441013/HTG.

USED Classic Mini Mk3-on right-hand door for cars to 1989; sold as-is. Ref: BMP326, BMP0326.

Original-spec Mk1-Mk2 classic Mini doors, made by British Motor Heritage. Ref: 14A8306, 14A8307, 14A8306/HTG, 14A8307/HTG.

Heritage Mk1-Mk2 classic Mini door skins made off the original BMC/Rover tooling. Ref: 14A5498, 14A5499,14A5498/HTG, 14A5499/HTG.

Small bracket inside the sill box section to strengthen the jack socket. Ref: 14A8336, 14A337.

Replacement door frame surround panel for roll-up window classic Minis only. Ref: CZH122/HTG, CZH123/HTG, CZH122, CZH123.

Genuine Heritage boot floor complete stamping including the rear seat base; does not include battery box. Ref: ALA5513, ALA5513/HTG.

Genuine Heritage lower quarter panel to repair rust or accident damage below the window line on Mk3-on classic Minis. Ref: HMP441014, HMP441015, HMP441014/HTG, HMP441015/HTG.

The genuine Heritage valance panel is the best-made and best-fitting, with holes and fittings as used on later classic Minis for rear fog lights, etc. Ref: 14A5497, CZH3353, 14A5497/HTG.

Genuine Heritage rear valance panel for the classic Mini Saloon (sedan). Ref: 14A6940, 14A6940/HTG.

This Heritage rear repair panel replaces the sheet metal from the bottom of the rear window opening down to the bumper lip, and from seam cover to seam cover.

Top outer section of the rear inner wheel arch; ideal for collision damage repair when is is not necessary to replace the whole arch assembly. Ref: 14A6617, 14A6618, 14A6617/HTG, 14A6618/HTG.

If you have had major rear panel damage and plan to retrofit the Mk1 tail lamp look to your classic Mini, this panel fills the bill.

Complete A-post inner closing (boxing) panel for roll-up window classic Minis; includes skin and internal bracket. Ref: ALA5688, ALA5689, ALA5688/HTG, ALA5689/HTG.

Closing plate for right hand rear wheel arch to the heel board; genuine Heritage. Ref: 14A6611, 14A6612, 14A6611/HTG, 14A6612/HTG.

Entire rear section, from roof to bumper valance, with Mk2 lamp holes, boot lid, and backlight holes to fit al models from 1967 to 2000.

Sheet metal panel at the bottom of the rear seat companion box. This makes a continuation of the of the inner sill. Ref: 14A8994, 14A8995.

Complete tailgate for the classic Mini Pickup, less the hinges, made by British Motor Heritage. Ref: CZH3293, CZH3293/HTG.

This steel panel supports the rear load floor on Austin, Morris, and Leyland Mini Estate and Van, and and also serves as the step for the rear "barn doors".

Bracket for supporting the slave cylinder on Verto clutch-equipped classic Minis. Ref: DAM5992.

Heritage has used the original tooling to remake the Mowog 11-blade fan exactly like the original. Ref: 12G2129, 12G2129/HTG.

This part is prone to rusting out due to battery acid. Now available as a British Motor Heritage Mini product. Ref: 14A6499.

Lamp brackets for MPi classic Minis with four (4) front lamps, or for a car being retrofitted with original Rover lamps and brackets. Ref: XBU100640 XBU100650 XBU10044

Steel mounting bracket for Wipac fog lamp S6078 or driving lamp S6007. Ref: XBU10045.

This bracket welds onto the firewall and is the fastening point for the flywheel-end engine stablizer ''dog-bone''. Made in the U.K.

British Motor Heritage-made left-hand fuel tank, 9.0 U.S. gallon capacity. Ref: ARP1043, ARP1043/HTG.

9.0 gallon (U.S.) tank with both pump and sender unit holes for injection classic Minis only. Ref: WFE106090.

Under-floor mounted fuel tank for the classic Mini Van, Estate, and Pickup; made in the UK by British Motor Heritage. Ref: 21A291, 21A291/HTG.

Heavy rubber seal that goes on top of the gas tank on fuel-injected classic Minis, and seals the fuel pump mounting flange to the tank. Ref: EDP9317.

Reproduction 9.0 gallon (U.S.) tank with both pump and sender unit holes for injection classic Minis only. Ref: WFE106090, WFE106090MS.

Non-retracting belt to suit late classic Minis with 3 mounting points at rear seat back. Made in the U.K. Ref: MSSB1113GREY, MSSB1113RED.

Headliner kits for Mk1 classic Mini saloons (sedans) 1959-1967. Ref: HL3000, HL3000W, HL3000P.

Lower control arms for Mk2-on classic Minis, featuring revised inner eye to accept the improved metal-sleeved inner bushing. Ref: 21A1879, 21A1881.

Round spare wheel clamp assembly with bolt to secure the spare tire in the boot of a classic Mini Sedan.

Panel that allows the original speedometer hole to be restored. Ref: HMP441017.