Products 1-16 of 16
3/14/2019 12:00:00 AM
Item #: SIE0140 -
Cone-shaped air filter for the SU HIF6/HIF44 carb; includes thick rubber gasket
Item #: AUD1468 -
"GY" .090 "Fixed" needle for SU HS2 Carburetor.
Item #: AUD1247 -
Needle, SU Carburetor, fixed, KW code. Believed to be original spec for some twin HS4 ace applications. Sold each.
Item #: AUD1261 -
.090 "Fixed" needle, "M", Std Cooper S with twin HS2.
5/19/2017 12:00:00 AM
Item #: CSK78 -
OEM SU Service Kit for minor rebuild of 1.5" HIF4/HIF38. Kit includes correct .090" jet, gaskets, seals and fuel level needle/seat. Many of these carbs are now used on 1000cc
Item #: MFA338 -
If you need a vacuum take-off, this carb spacer is the trick. Plastic spacer with metal vacuum nipple fits 1.5" H4 or HS4 SUs. Approximately .25" thick.
Item #: MFA446 -
Carb-to-manifold spacer with facility for fitting a vacuum gauge. Suitable for HS6 and HIF44. 6.3mm thick.
Item #: BDR125 -
This is the correct light viscosity oil for controlling the movement of the piston inside SU and Zenith-Stromberg carburetors. Supplied in a 125ml bottle with applicator cap.
Item #: LZX1505 -
Black plastic screw top with damper/plunger for the U.S. HIF carburetor.
Item #: AUE279-USED -
Used AUE279 float chamber lid with vent for twin carb installation. Check carefully this configuration of inlet and vent pipes are exactly what you need.
Item #: VZX1099 -
Fuel control needle and seat asembly for HIF38, HIF44, and some HIF4 carbs. Viton tipped needle resists deterioration by modern fuel with alcohol and other additives. Sold each.
Item #: SIE0045 -
Grose Jet folat valve for all side-float SU carbs.
Item #: SIE0038 -
The HIF44 / HIF6 1.75" SU has generally become the carb of choice on 1275s and larger engines.
12/13/2018 12:00:00 AM
Item #: AUD449 -
Restore lost performance with a new SU HS2 (1.25") single carb to replace original one used on 850 and 998 Minis. Equipped with floating needle.
Item #: SIE0124 -
Billet aluminum stub stack with machined and polished radius to smoothe and enhance the entry of air into the mouth of the carb. Fits inside of most pancake filters, but
Item #: AEC2075 -
If you have a dual carb setup, these are the small return springs that mount to the heat shield bridge. Use three (3) per installation.