Products 289-328 of 328
Item #: AEG0349 -
Offset throttle cable guide as used on twin carbs, but adaptable for most installations. Can be used in lieu of the obsolete 12A259.
Item #: SBB102500 -
54" long throttle cable for the later 1995 and 1996 fuel-injected SPi Mini. Includes cable and outer sheath assembly.
Item #: C-AHT0085 -
Heavy-duty cable with a little extra length. Very useful for custom applications and Weber carb conversions. See NAM7914 for standard length cable.
6/6/2018 12:00:00 AM
Item #: SBB10126 -
If you have an original HIF carb or have converted to one, this is the throttle cable you'll need for LHD cars. Length of outer sheath is 22"
Item #: SBB10099 -
Correct length and end fittings for right-hand drive (RHD) car equipped with an HIF carb. Length of outer sheath is 24".
Item #: SBB103720E -
Throttle cable with threaded end for left-hand drive 1997-on MPi Minis. 38? length.
7/31/2018 12:00:00 AM
Item #: SBB103400 -
Aftermarket throttle cable for right-hand drive MPI Minis.
6/6/2018 12:00:00 AM
Item #: SBB10186 -
Throttle cable for left-hand drive SPI Mini models. Approximate length is 54". We stock a modestly priced aftermarket part, since the genuine Rover cable sells for about four
Item #: SBB10187 -
Throttle cable for right-hand drive SPI Minis. See SBB102510 for Rover genuine cable. SBB10186 is for left-hand drive SPI Minis.
Item #: SAC0019 -
Anti-friction throttle cable with heavy-duty lined outer cable. Fits most early Minis with single or dual carbs, except Canadian cars with short cable, HIF6 converted cars, or fuel injected cars.
Item #: WZX1323 -
Solid throttle disc without the popper valve?, for SU HS4 carburetor. Sold each.
1/18/2019 12:00:00 AM
Item #: WZX1183 -
Throttle disc kit without poppet valve for SU HIF44 Carburetor. Includes disc, retaining screws and carb mounting gaskets.
Item #: WZX1320 -
Throttle disc kit for SU HS2 Carburetor. Includes disc, retaining screws and carb mounting gaskets. Genuine S.U.
Item #: WZX1321 -
Throttle shaft kit with gaskets for HS6 carb. This 1.75" carb is often used as a performance upgrade on a Mini with the C-AHT770 inlet manifold.
Item #: AUD9927 -
Throttle disc with poppet valve for use on 1968 and newer HS4 carburetor.
Item #: LZX1739 -
Cam-type throttle lever for the HIF Carburetor. As supplied on SIE0038.
7/15/2019 12:00:00 AM
Item #: 21A349 -
This rubber cushioned pedal stop bolts to the lower bolt of the pedal box and prevents the throttle pedal from lifting too high
Item #: 88G0347U -
The early, Mk1, Mk2, and Mk3 Minis have a distinctively small throttle pedal, measuring 1.125" tall x 0.875" wide. For left-hand drive cars. Used.
Item #: FAM7872 -
The throttle pedal was slightly revised when the classic Mini got the "face lift" in 1976. For right-hand drive cars from 1976-on. Used
Item #: 1E5537 -
If you have a single HS carb installation, this it the spring you will normally need.
Item #: AEC2075 -
If you have a dual carb setup, these are the small return springs that mount to the heat shield bridge. Use three (3) per installation.
Item #: WZX1126 -
Replacement throttle shaft kit for 1-1/2? SU HIF38 or HIF4. Includes shaft, seals, butterfly screws and gasket.
Item #: WZX1310 -
HS2 throttle shaft kit. Includes shaft, locktab, disc screws and carb mounting gaskets.
Item #: WZX1177 -
Throttle shaft kit with gaskets for HS4 (1.5") carb.
4/16/2019 12:00:00 AM
Out of Stock
Item #: MSA1126 -
For those who value form over function, use this dummy fuel tank neck and grommet to give your Mini the "Cooper S" look.
Item #: SMI0062D -
Universal metal fuel filter kit, sized correctly for the Mini. Not for use with fuel injection.
Item #: ALA7905 -
This bracket is needed if a single tank car is being upgraded to twin tanks. Mounts on rear of boot bulkhead. Complete with reinforcement mounting plates. See also SIE0012 for
Item #: PHP10027 -
Vacuum tube for the single-point injection (SPi) Mini. Goes from the underside of the air filter to the upper side hot air temperature control valve.
Item #: PHP10043 -
Vacuum tube for the single-point injection (SPi) Mini. Runs from the underside of the air filter box to back of the inlet manifold.
7/10/2019 12:00:00 AM
Item #: MLH10026 -
Fuel vapor intake trap hose on the single-point injection (SPi) Mini. Runs from the ECU to the fuel trap.
Item #: MLH10022 -
Vacuum tube for the single-point injection (SPi) Mini. Runs from the inlet manifold to the fuel trap.
Item #: RFN0403 -
Rubber grommet to prevent chafe of the tank vent hose where it passes through the boot floor.
Item #: AUC1318 -
This seal sits against the head of the bolt that holds the float bowl on the other side of the body on HS2/4 twin carbs only.
Item #: 72116 -
Main Vernturi, commonly referred to as a “choke”. Choose 36mm or 38mm; sold each.
Item #: 41640.001 -
Bottom plate gasket for 40DCOE and 45DCOE Weber carb. Sold each.
Item #: SIE0253 -
Deluxe Weber DCOE on-carb linkage assembly. Super low profile sliding linkage with adjustment of 22-48mm for full opening and easy throttle return tension.
7/10/2018 12:00:00 AM
Item #: SIE0024 -
This competition linkage kit bolts to the top of a DCOE Weber carb, giving smooth, predictable throttle control.
Item #: 12G1811-USED -
This wing nut has a long sleeve and is normally used with Mini 1000 or Austin America air filter housings. No longer available new so we keep used ones on hand.
Item #: 12G2705E -
Reproduction wing nut to secure the cover on the twin-carb air filter housing used on the Cooper and Cooper S.
Item #: JZX1586 -
Fits around the stem of the damper to prevent the damper from dropping out of the dashpot cover. Fits SU HIF carburetors.