Products 1-26 of 26
Item #: ADU6033 -
Large-diameter input gear bearing designed for use in the Metro Turbo flywheel housing; 1.692'' outside diameter
Item #: SEL0019 -
Replacement chrome bezel for the Mk1 Austin or Morris classic Mini speedometer.
6/7/2017 12:00:00 AM
Out of Stock
Item #: FSE10020 -
Bonnet release cable, as standard on all classic Minis from 1992/3 to 2000.
Item #: MSSK018 -
Bolts to an existing hinge and is spring-loaded to act as an auxiliary bonnet prop; can assist the opening of the hood and reduce closing slam.
2/2/2021 12:00:00 AM
Item #: CK974 -
Carpet kit for classic Mini Vans and Pickups with magic wand or remote shift up to 1973
Item #: 14A8009 -
This is the full-width chrome finisher strip that clips to the lower dash tray edge.
Item #: C-AHT597 -
An all-out racing ''paddle'' clutch plate using five (5) sintered metal friction pads.
Item #: DT3024A -
Pair of black dashboard trim panels that fit on either side of the speedometer. For 1962-1970 Minis fitted with the round binnacle with only the speedometer in the center of the dash.
2/10/2021 2:00:00 AM
Out of Stock
Item #: DDB194 -
Non-standard side-exit push-in distributor cap for Lucas 45D distributors.
Item #: 34G2528 -
Window crank with square post for Riley Elf, MG1100 and Austin America; also fits Australian Minis with roll-up windows.
Item #: C-19G3256 -
Fabricated steel lower engine mounts to mount the engine rigidly; recommended for racing only.
Item #: C-AEG372 -
High-performance downpipe assembly bolts directly to the exhaust manifold used on the fuel injected SPi and MPi classic Mini.
Item #: 17H2096 -
Heater core (matrix) for Mk1 classic Minis with recirculating-type heater.
Item #: KAD1012230 -
Steering rack stops that can help reduce tire rubbing on bodywork and frame, on classic Minis converted to 13'' wheels.
Item #: STF0045HD -
Competition-quality A+ 3-step layshaft; precision-ground, fully heat-treated to exacting specifications.
Item #: SWT0120 -
These bullet-shaped lug nuts bring a fresh look and also offer improved security. Designed to be used on any wheel with a 60 degree tapered nut seat on the wheel itself; removed with a hex tool (included) that fits internally, so they cannot be removed with conventional sockets.
Item #: CZH3353 -
The genuine Rover valance panel is the best-made and best-fitting, with holes and fittings as used on later classic Minis for rear fog lights, etc.
1/31/2019 12:00:00 AM
Item #: SV2000 -
This was the first style of sun visor used on the very early Minis (1959-Oct 64) and was finished in the matching color to the headlining. Choose black, white or fleck; sold each.
9/18/2019 2:00:00 AM
Item #: 54674/5 -
Restoration-quality reproduction of the tail light for the Mk2 or Mk2 classic Mini. Includes rubber seal for lamp to body.
12/28/2020 12:00:00 AM
1/18/2019 12:00:00 AM
Item #: WZX1183 -
Throttle disc kit without poppet valve for SU HIF44 carburetor. Includes disc, retaining screws and carb mounting gaskets.
Item #: GUJ0102 -
Inner U-Joint to rebuild your QL5000 unit. Your nylon cups can be removed from their original U-Joint and pressed onto this new one.
2/11/2021 2:00:00 AM
Item #: 54425008 -
Vacuum advance module as Lucas 54425008. This fits the 59D4 distributor, such as 41857A as fitted to some 998 engines.
2/17/2021 2:00:00 AM
Out of Stock
Item #: SBO0087 -
Inner rear valance for the classic Mini Van, Estate, and Pickup; reproduction.
11/18/2020 2:00:00 AM
Item #: SEN0028 -
Set of eight (8) dual valve springs for classic Mini A-series engines. OEM equivalent.
Item #: SEN0091 -
Special Swedish spring wire is used to produce a spring that will tolerate lift of up to .490'', as is found with high-lift rockers.
Item #: TAM1770 -
Triple-groove style exhaust valve, fits 998cc classic Mini engines built after 1984.