Products 49-62 of 62
Item #: SEL0030 -
Black-painted steel mounting pod for 80mm tachometer. Will mount on any flat surface.
5/14/2021 2:00:00 AM
Item #: SEL0032 -
Steel mounting pod for 80mm tachometer. Shallower than others, for mounting in confined areas.
1/1/2022 12:00:00 AM
1/21/2021 12:00:00 AM
Item #: SEL0033 -
Deluxe black wrinkle-finish steel mounting pod for 80mm tachometer. Adjustable swivel mount.
Item #: SEL0029 -
Mounting pod for 80mm tachometer, in chrome. Will mount on any flat surface.
Item #: SIB120 -
80mm genuine Smiths 8000 RPM tachometer. Chrome bezel matches the gauges found on all center-binnacle classic Minis. Operates on negative ground only
7/8/2021 2:00:00 AM
Item #: GTR206 -
Brown plastic sensor for fan and ECU, fitted in sandwich plate below thermostat on twin-point classic Minis.
Item #: GTR307 -
Temperature sending unit as fitted to SPi (single-point injection) classic Minis only from 1992 to 1996. Note large plastic end for wiring connection.
Item #: GTR0101 -
This sending unit for the temperature gauge was used starting in about 1970 when negative ground was introduced. Coded black.
Item #: GTR0104 -
Most classic Minis with dual gauges (up to 1969) that had oil/temp gauges fitted used this type when fitted with a voltage stabilizer
Item #: SEVU0004 -
Complete instrument pod and cluster as used on Mk2-on classic Minis with Deluxe instrumentation. Speedo is 90 mph and may require calibration to match your final drive. No plumbing.
9/3/2021 2:00:00 AM
Item #: SIB220 -
52mm diameter 10-15 volt meter, chrome bezel with SMITHS logo; choose black or magnolia face.
6/15/2021 2:00:00 AM
Item #: BMK1539 -
Voltage stabilizer for classic Mini Clubman models, and 1984-1988 classic Minis with driver’s-side gauge cluster.
6/17/2020 2:00:00 AM
Item #: C34770A -
A modern, solid-state version of the voltage stabilizer; for negative ground classic Minis only. Mounts to the back of the center binnacle speedometer and supplies constant voltage to the fuel and temperature gauges.
6/17/2020 2:00:00 AM
Item #: C34770-POS -
A modern, solid-state version of the voltage stabilizer; for positive ground classic Minis only. Mounts to the back of the center binnacle speedometer and supplies constant voltage to the fuel and temperature gauges.