Products 241-288 of 775
Item #: SBO0712/3 -
This panel replaces the bottom 3.5" of the inner frame of the door, plus the bottom lip. Fits roll-up window doors only; choose right- or left-hand side.
Item #: CZH0122/3 -
The door surround can be replaced in the event of major accident damage. For roll-up window cars only; choose right- or left-hand side. Special order, allow 3-6 weeks.
Item #: CZH1729 -
Small gasket for leading end of exterior door handle of roll-up window cars. Use with ALA5795 rear gasket. Sold each.
Item #: ALA5795 -
Gasket between rear of door handle and exterior door skin. Use with small gasket CZH1729, shown, but sold separately. All sold each.
Item #: SBO0340 -
Protect your paint job from scratches make by your rings and fingernails. Polished stainless door shields fit in the dish behind the door handle. Simply loosen the exterior handle and
8/27/2019 12:00:00 AM
Item #: GLZ0119A -
Interior door handle for Mk1-2 cars. Replaces cable opener for early cars and provides an easy to use lever for door release. Spoon shape, in chrome metal.
Item #: ALA6381 -
Thick metal backing plate to support the studs of Mk3-on door hinges. Use one (1) per hinge.
Item #: SBO0035 -
Set of 1/4" stainless steel bolts, studs and washers. One set has all the hardware for four hinges.
Item #: SBO0034 -
Although door hinges can be rebushed if they are sagging, if this has been done a couple of times the hinges may be too far gone. A complete hinge set
1/7/2020 12:00:00 AM
Item #: SBO0130 -
Set of four (4) aftermarket-made internal door hinges for Mk3-on roll-up window doors.
Item #: 14A6818-21 -
Now remade in aluminum, these reproduction door hinges replace the original steel or brass ones. Order one (1) ALA7844 and one (1) BMP0135 gasket per hinge. Select upper right
Item #: 14A7176-77 -
Stamped aluminum trim to protect the front end of the Mk1-2 door pocket. Sold each, order 14A7176 right side and/or 14A7177 left side. Rivet in place.
Item #: CZH3528/9 -
On roll-up window door cars only, the main lock assembly attaches to the B-post end of the door. Choose right- or left-hand side.
Item #: G283 -
A replacement door lever in polished metal to upgrade the interior from the standard plastic version. Ideal complement to SBO0430 polished window crank. Sold each.
Item #: 27H9634 -
If you need to replace the locks in an original Mk1-2 car, this set includes a pair of barrels and keys. One fits the driver's door handle and a matching
6/5/2018 12:00:00 AM
Item #: CZH0611 -
Rectangular black plastic finisher that surrounds the lock toggle. Sold each.
Item #: EKU100020/30-USED -
Lock control with link for roll-up window doors, as fitted to 1993-on cars, but will retrofit all roll-up window doors used on UK Minis. Choose left-hand or right-hand.
Item #: MSA0193 -
Pair of interior door opening handles in burl walnut; complements burl walnut dash and similar interior styling accessories.
Item #: INNO-1 -
Pair of door opening links for roll-up window Innocenti Mini. Used condition; one (1) pair only available.
Item #: 24A0664 -
Highly sought-after 24A664 interior door pull cable for Mk1 & Mk2 Mini 850, Deluxe, Traveller, Van and Pickup.
Item #: 14A6835 -
This is the u-shaped metal receiver on the b-post that accepts the nylon alignment buffer when the door is closed.
Item #: 14A6832 -
This is the stair-stepped striker on the b-post that receives the tongue of the door latch when the door is closed. Aftermarket reproduction, sold each.
10/23/2017 12:00:00 AM
Item #: 24A1169 -
A curved metal molding finishes the top edge of the Mk1 and Mk2 door pocket. Fits right or left-hand side.
Item #: YGA0452 -
Handy plastic door bin that screws to bottom of the roll-up window door. Fits classic Minis 1970-2000 (excluding Innocenti).
10/3/2019 12:00:00 AM
Item #: MSA0192 -
Pair of interior door pull handles in burl walnut; complements burl walnut dash and similar interior styling accessories.
Item #: GLZ0118 -
Plastic door pull as fitted to early roll-up window cars. Includes chrome metal brackets at each end. Sold as an assembly, two required per car.
Item #: MSA1132 -
High-quality, polished aluminum alloy door pull handles; much stronger than the original plastic ones.
9/30/2019 12:00:00 AM
Item #: XGA9934 -
If you want to keep your early Mini original, this door seal is the one to use. Fits either side. Black solid rubber u-channel, with hollow foam seal section that flattens to
Item #: XGA9934V -
Black rubber, bulb-type seal to fit the small door gap of classic Mini sliding-window doors.
Item #: CGA2835E -
A modern bulb seal design with vinyl-covered u-channel to fit the door opening flange on all internal-hinge cars. Fits either side, does one door. Sold each.
Item #: SBO0650/1 -
This patch panel can be used for rust repair in the lower outer skin of the Mk3 door. Use tack welds to avoid heat distortion before welding to original upper skin. Aftermarket; choose right- or left-hand side.
Item #: 14A8096/7/SKIN -
Lower section of outer skin for right side of classic Mini Van/Estate rear door. Includes the lower edge of the window. Choose right- or left-hand side.
Item #: SBO0591/2 -
The most common area for rust in the sliding window doors is the outer skin, which usually rusts from the inside door pocket out. Aftermarket; choose right- or left-hand side.
Item #: 14A5498AL/99AL -
Reproduction aluminum door skin; lightweight for racing applications.
Item #: 14A5498/9 -
Heritage door skins are very accurately made off the original BMC/Rover tooling; therefore, they are easiest to install and will save on labor costs at your body shop. Choose right-hand or left-hand side.
Item #: CZH3300E/1E -
Quality aftermarket door skin. ideal for economical repair of a rusty roll-up window door. Choose right- or left-hand side.
Item #: CZH3300/1 -
This Heritage Mk3 door skin replaces the original, exactly as new. Must be welded to the old frame; choose right- or left-hand.
Item #: SBO0705/6 -
Door step and lower panel for the classic Mk3-on Mini Estate. Aftermarket; choose right- or left-hand side.
9/5/2017 12:00:00 AM
Item #: SBO0327/8 -
Forms the top edge of the door step and extends all the back to the rear wheel; fits external-hinge classic Mini Estate, Pickup, and Van. Aftermarket; choose right- or left-hand side.
Item #: SBO0329/30 -
Aftermarket repair panel is ideal for rust commonly found in the door step and lower rear quarter panel areas. For roll-up window Mini sedans only. Choose right- or left-hand side.
Item #: SBO0064/5 -
Rust along the bottom of the door opening and the adjacent rear quarter panel can be repaired with this reproduction panel. For Mk1-2 Saloon only; choose right- or left-hand side.
Item #: SBO0648/9 -
If the door sill/step and its rounded corners have become rusty, this repro patch panel is ideal for replacing the rotten area. Specifically designed for RH side of Mk3-on roll-up
Item #: SBO0092/3 -
Properly-shaped lower door frame repair panel for all external-hinge classic Minis, including Mk1, Mk2, Mini Pickups, Vans, and Estates. Must be professionally welded in. Choose right- or left-hand side.
8/16/2018 12:00:00 AM
Out of Stock
Item #: CZH3314 -
This steel panel supports the rear load floor on Austin, Morris, and Leyland Mini Estate and Van, and and also serves as the step for the rear "barn doors".
Item #: CZH0627-USED -
Used striker plate assembly with metal loop to engage the door lock assembly; includes face plate. Fits UK Minis with roll-up windows, either side.
10/11/2017 12:00:00 AM
Item #: CZH0627 -
Striker plate with metal loop to engage the door lock assembly. Fits either side.
9/30/2019 12:00:00 AM
Item #: 24A0088 -
Now available again after a long production lapse. Improved, and in stock at Seven Enterprises Ltd. This is the original rigid type, with stronger reinforced internal wire and
Item #: YXX3199PA -
This safety upgrade will fit all roll-up window Mini variants. The door window cranks before 1982 were cheap plastic parts that were fragile and hard to use. In 1982,