Products 193-240 of 764
Item #: DT3022 -
Liner fits in the dash tray, and is held in place by the speedo panels. Made of vinyl to match the interior trim color, and has a foam backing as original.
Item #: DT3021 -
Pair of speedometer trim panels to fit Mk1 Minis with the three instrument speedo binnacle set into the dash.
Item #: DT3021GB-X -
Pair of speedometer trim panels to fit Mk1 Minis with the three instrument speedo binnacle set into the dash. Gold Brocade only.
Item #: DT3024 -
Pair of dashboard trim panels that fit on either side of the speedometer. For 1962-1970 Minis fitted with the round binnacle with only the speedometer in the center of the dash.
5/30/2019 12:00:00 AM
Item #: DT3026 -
Pair of dashboard trim panels that fit on either side of the speedometer. For 1970-1973 Minis fitted with the oval binnacle with the three clocks in the center of the dash.
Item #: DT3047/8 -
Universal set of lining panels to fit two-clock or three-clock instrument clusters, consisting of one large panel to fill the majority of the dash area, and a smaller one to fill the gap between the binnacle and the A-pillar.
Item #: DASH003 -
Burl walnut dashboard for right hand drive 1984-on Minis. High-gloss finish. Installs over existing 2-gauge cluster in front of driver, and has removable portion for installation of radio. Special order.
Item #: DASH008 -
Burl walnut dashboard for left-hand drive, 1984-on Minis. High-gloss finish. Installs over existing 3-gauge cluster, plus accepts three extra gauges in the center.
Item #: PMY470 -
Burl walnut dashboard for right hand drive 1984-on Minis. High gloss finish. Installs over existing 3-gauge cluster, plus accepts three extra gauges.
11/9/2017 12:00:00 AM
Item #: DASH005 -
Burl walnut dashboard for right-hand drive 1984-on Minis. High-gloss finish. Installs over existing 3-gauge cluster in front of driver, and has removable portion for installation of radio.
Item #: PMY474 -
Retro-look burl walnut dashboard to fit later Minis equipped with upper and lower dash pad. Accepts the earlier 3-clock gauges (not included). Suitable for left-hand or right-hand drive.
Item #: C-AJJ3330/1 -
Pair of period-correct works-type rally dash panels to fit a center-binnacle Mini. Finished in black crinkle finish.
6/3/2019 12:00:00 AM
Item #: MSSK2202 -
30th anniversary decal kit for red "Mini Thirty" models. Kit includes two (2) rear quarter decals, one (1) boot lid decal, and coordinating pinstripes. Reproduction
Item #: SMI0163 -
Exterior-grade vinyl self-adhesive label/decal. British Leyland logo over "Special Tuning Abingdon". Dark green on white.
Item #: SMI0114 -
BMC Rosette decal, approx. 3.5" wide. Apply to inside of window or windscreen.
Item #: SMI0157 -
BMC Rosette water-transfer decal, approx. 3.5" wide. Apply to outside of window.
Item #: SMI0113 -
BMC "Special Tuning" rosette window water-transfer decal. Approx. 3.5" wide.
Item #: SMI0112 -
Restoration-quality sticker as used on the front edge of the twin carb air cleaner case, for the classic Mini Cooper and Cooper S
Item #: SMI0176 -
Metallic decal, "Lucas HA12 Coil".
Item #: MSA112x -
The latest model Sportspack Mini Coopers have a similar 4" diameter decal on the bodyside. Choose black or white die cut vinyl.
Item #: MSA1150 -
Silver laurel wreath sticker for exterior application. Die cut vinyl with white application tape overlay. Reproduction of the one fitted to Sport Pack Minis. Sold each.
Item #: SMI0129 -
Metallic "Negative Ground" decal.
Item #: SMI0124 -
Vinyl self-adhesive sticker/decal, metallic silver. Blue "Leyland" with "ST" flag logo, over "Take care to select correct replacement ST parts". Approx. 4-5/16"x 1-3/8".
Item #: SBO0010 -
This kit contains all the parts needed to upgrade any Mini to the enhanced bumper setup found on Super Deluxe, Cooper, and Cooper S models. Now in stainless, the kit
Item #: 14A9949 -
Black finisher for Mini dash when fitted with vinyl covering. Fits over the windscreen demister duct outlets. Sold each.
Item #: 14A9949C -
Chrome finisher for Mini dash when fitted with vinyl covering. Fits over the windscreen demister duct outlets. Sold each.
6/21/2017 12:00:00 AM
Item #: CZH1785 -
The early boot lid t-handle was phased out in 1972, and all subsequent cars received this close fitting Mk3 boot handle. Includes both roll-up window door exterior handles and boot handle with matching locks/keys.
Item #: 14A6833 -
Nylon door wedge buffer, to fit all sliding-window doors.
Item #: SBO0068 -
Set of three matching lock barrels for both door handles and the boot handle on any Mk3-on (roll-up) window car. Includes two keys.
Item #: C-STR238SD -
Individual door bar to complete Safety Devices roll cage assembly. This helps tie the front section to the main hoop, and provides side impact protection. Sold each.
4/24/2018 12:00:00 AM
Item #: CGE10038/9 -
Rubber seal for door check after 1986. Rover. Choose right- or left-hand side.
Item #: CZH4053 -
Special shaped seal keeps water out of the check arm opening. Left-hand side.
Item #: CZH4052 -
Special shaped seal keeps water out of the door check arm opening. Right-hand side.
Item #: ADA5671 -
Check arm with stop to prevent roll-up window door from swinging too far open. When functioning properly it will hold the door open. Fits either side. Use with
4/18/2018 12:00:00 AM
Item #: 14A6745 -
S-shaped metal bracket mounts on the hinge panel where the strap passes over the door seal. Use 2 per car.
Item #: 14A0764 -
Stamped metal finisher with recesses for door strap screws. Use one on each end of the strap, 4 per car. Black.
4/18/2018 12:00:00 AM
Item #: 14A6744 -
Metal bracket on the door to affix the restraint strap. Use 2 per car.
Item #: DC3005 -
One of the quaint features of the Mk1-2 Mini models was the door check straps to prevent the doors from swinging too far.
Item #: CZH0640/1-USED -
Door opening mechanism and link for Mk3-on door. Mounts inside door. Choose right (CZH0640) or left (CZH0641). Handle (lever) 34G2529 is not included, order separately.
Item #: 24A1517 -
This simple trim was originally fitted the the inside lip of the Mk1 and Mk2 doors, just below the windows and above the interior door handle.
Item #: SBO0636/7 -
Repair patch for the bottom structure of sliding window door. Aftermarket; choose right- or left-hand side.
Item #: SBO0712/3 -
This panel replaces the bottom 3.5" of the inner frame of the door, plus the bottom lip. Fits roll-up window doors only; choose right- or left-hand side.
Item #: CZH0122/3 -
The door surround can be replaced in the event of major accident damage. For roll-up window cars only; choose right- or left-hand side. Special order, allow 3-6 weeks.
Item #: CZH1729 -
Small gasket for leading end of exterior door handle of roll-up window cars. Use with ALA5795 rear gasket. Sold each.
Item #: ALA5795 -
Gasket between rear of door handle and exterior door skin. Use with small gasket CZH1729, shown, but sold separately. All sold each.
Item #: SBO0340 -
Protect your paint job from scratches make by your rings and fingernails. Polished stainless door shields fit in the dish behind the door handle. Simply loosen the exterior handle and
4/18/2018 12:00:00 AM
Item #: GLZ0119A -
Interior door handle for Mk1-2 cars. Replaces cable opener for early cars and provides an easy to use lever for door release. Spoon shape, in chrome metal.
Item #: ALA6381 -
Thick metal backing plate to support the studs of Mk3-on door hinges. Use one (1) per hinge.