Home > Classic Mini DIY: Rebuilding a Classic Mini Rod Change Gearbox #2
Products 1-19 of 19
Show
Price: $35.50
View
8/22/2017 2:00:00 AM
33.9500
Pending Warehouse Check
Item #: AAU1815 -
Split needle roller bearing, as used in classc Mini 4-synchro gearboxes beginning in 1968. Ref: AAU1815.
Price: $88.50
View
2/16/2022 12:00:00 AM
89.95
11/25/2019 12:00:00 AM
Pending Warehouse Check
Item #: ADU7619-RHP -
Large bearing that carries the first motion shaft in the gear case starting in 1968-on; made by RHP. Ref: ADU7619, ADU7619-RHP.
Price: $57.95
View
10/7/2019 12:00:00 AM
57.95
Pending Warehouse Check
Item #: ADU7619 -
Large bearing that carries the first motion shaft in the classic Mini gear case starting in 1968-on. Ref: ADU7619, 22G848, ADU2468.
Price: $36.95
View
10/6/2019 2:00:00 AM
29.9500
Pending Warehouse Check
Item #: AAU1816E -
Split-needle roller bearing as used under the 2nd and 3rd gears in 4-synchro transmissions starting in 1968. Ref: AAU1816, PTM0066.
Price: $41.95
View
7/7/2021 2:00:00 AM
51.95
Pending Warehouse Check
Item #: AAU8424 -
Small bearing with barrel rollers at the outer tip of the input gear-first motion shaft assembly. Ref: AAU8424, 13H6080.
Price: $68.50
View
11/10/2020 2:00:00 AM
59.95
3/4/2020 2:00:00 AM
Pending Warehouse Check
Item #: AAU8424RHP -
Small bearing with barrel rollers at the outer tip of the input gear-first motion shaft assembly. Made by RHP. Ref: AAU8424RHP, AAU8424, 13H6080, PTB0367.
Price: $11.50
View
10/6/2019 2:00:00 AM
11.9500
Pending Warehouse Check
Item #: CHM0141 -
Two of these are needed in 4-synchro laygears before 1979, and only one for later A+ gears. Fits first motion end of laygear. Ref: CHM141, CHM0141.
Price: $6.50
View
4/14/2021 2:00:00 AM
6.9500
Pending Warehouse Check
Item #: 88G0396 -
Small caged needle roller bearing, fits both ends of laygear on 3-synchro and 1st gear end of 4-synchro transmissions to 1979. Ref: 88G396, 88G0396.
Price: $6.50
View
10/7/2019 12:00:00 AM
6.7500
Pending Warehouse Check
Item #: 13H9513 -
Starting in 1979, the layshaft was revised and a new needle roller bearing was fitted at the first gear end. This bearing is also used on the end of the
Price: $98.50
View
10/6/2019 2:00:00 AM
69.9500
Pending Warehouse Check
Item #: AAU1365-4 -
Double-row ball bearing that supports the mainshaft in the center web of the gearbox. Ref: AAU1365.
Price: $104.95
View
3/1/2022 12:00:00 AM
109.95
8/1/2019 12:00:00 AM
Pending Warehouse Check
Item #: AAU1365-RHP -
Double-row ball bearing supports the mainshaft in the center web of the gearbox. Ref: AAU1365, AAU1365-RHP.
Price: $5.50
View
9/12/2017 12:00:00 AM
Pending Warehouse Check
Item #: ADU4992 -
Circlip, or stop ring, around the AAU1365 double ball bearing on the mainshaft.
Item #: BLS0107 -
Detent ball for gear synchronizing hubs in all classic Mini transmissions. Ref: BLS107, BLS0107.
Item #: 22G2262 -
Detent spring inside of synchro hubs in 4-synchro gearbox. Use six (6) per gearbox. Ref: 22G2262.
Item #: DAM7426 -
Shift fork for third-fourth gear for rod change transmission from 1973-on.
Price: $30.95
View
3/31/2024 12:00:00 AM
33.9500
Pending Warehouse Check
Item #: 22G2033 -
Baulk synchro ring that gives good service life for road-going transmission rebuilds. Ref: 22G2033, 22G2033MS.
Price: $87.50
View
9/23/2019 2:00:00 AM
46.9500
Special Order
Item #: C-22A1741 -
CNC-machined synchro ring, heat-treated and finally grooved for accuracy and concentricity; similar to those produced by BMC in the '60s. Ref: C-22A1741, 22A1741.
Item #: DAM7455 -
First/second gear synchonizer hub assembly for all 4-synchro transmissions. Ref: DAM7455, 22G2263.
Price: $310.95
View
3/24/2020 12:00:00 AM
269.9500
Pending Warehouse Check
Item #: 22A1021 -
Reproduction first/second gear synchonizer hub assembly for all 3-synchro B-type transmissions, including the classic Mini Cooper S. Ref: 22A1021.
Questions? Email parts@7ent.com, or call
(800) 992-7007 (U.S. only) or (530) 886-0771