Home > Classic Mini DIY: Early 998 #6 - Painting time!
Products 1-17 of 17
Show
Price: $34.95-$36.95
View
Item #: SMI-PAINT -
Very good-quality engine enamel in original-looking vintage engine colors. Ref: 220-580, GAP410, 220-550, 220-540, 220-560, 220-510.
Price: $7.50
View
9/11/2017 2:00:00 AM
7.9500
Pending Warehouse Check
Item #: 22A2237B -
Heavy paper gasket that forms the seal between the flywheel housing and the engine/transmission. Ref: 22A2237, 22A2237B, 22A2237E.
Price: $41.95
View
9/15/2019 2:00:00 AM
31.9500
Pending Warehouse Check
Item #: 22A1547 -
.134''-.135'' thick thrust washer for A-series idler gear with .75'' pin diameter. Ref: 22A1547.
Price: $41.95
View
9/15/2019 2:00:00 AM
31.9500
Pending Warehouse Check
Item #: 22A1548 -
136''-.137'' thick thrust washer for A-series idler gear with .75'' pin diameter.
Price: $41.95
View
9/15/2019 2:00:00 AM
31.9500
Pending Warehouse Check
Item #: 22A1549 -
.138''-.139'' thick thrust washer for the A-series idler gear with .75'' pin diameter.
Price: $41.95
View
9/15/2019 2:00:00 AM
31.9500
Pending Warehouse Check
Item #: 22A1545 -
Machined steel thrust washer for early idler gear with .75'' pin diameter. Ref: 22A1545.
Price: $41.95
View
9/16/2019 12:00:00 AM
31.9500
Pending Warehouse Check
Item #: 22A1546 -
Machined steel thrust washer for early idler gear with .75'' pin diameter. Ref: 22A1546.
Item #: DAM5914 -
Shim for 1979-on idler gear with .875'' pin diameter. Ref: DAM5914.
Item #: DAM4823 -
Machined thrust washer for 1979-on idler gear with .875'' pin diameter. Nominal .134'' thickness. Ref: DAM4823.
Item #: DAM4824 -
Machined thrust washer for 1979-on idler gear with .875'' shaft diameter; .136''-.137'' thick. Ref: DAM4824.
Item #: DAM4825 -
Shim for 1979-on idler gear with .875'' pin diameter. Approximately .138'' thick. Ref: DAM4825.
Item #: DAM4822 -
Machined thrust washer for 1979-on idler gear with .875'' pin diameter. Ref: DAM4822.
Item #: 22G943E -
Idler gear for the pre-A+ classic Mini 4-synchro transmission. 31 teeth, .75'' shaft diameter. Ref: 22G943, 22G943E.
Item #: DAM2924 -
Idler gear for A+ transmissions, 1979-on. Ref: DAM2924, TUB101310.
Item #: C-STR30A -
Straight-cut idler gear with .875" shaft for A+ transmission and flywheel housing. Fits Mini Spares' Evolution straight-cut drop gears. 30 teeth.
Price: $12.95
View
6/23/2020 12:00:00 AM
Pending Warehouse Check
Item #: MOTOSEAL -
For use on small engine covers, case halves, and clutch housings; forms a tough flexible bond that is highly effective on irregular and uneven joint surfaces
Item #: 599BR -
Permatex Ultra Grey RTV Gasket Maker. Seven recommended gasket-in-a-tube. 3.5 ounce size.
Questions? Email parts@7ent.com, or call
(800) 992-7007 (U.S. only) or (530) 886-0771