Used Parts

Metal cooling fan for classic Mini alternators without a keyway on the shaft, typically 1980-1996; used condition. Ref: AUU1097.

Refurbished bracket for Hydroelastic classic Minis only, to retain the brake line and hydroelastic pipe. Ref: 21A1522, U-21A1522, 21A1522-USED.

Outer cover for the Verto or A+ flywheel/clutch assembly; used. Ref: AHU1106, 88G300, U-AHU1106, 88G0300U.

Small CV joint for 997 and 998 classic Mini Coopers, and all classic Minis with front drum brakes; used. Ref: GCV1105, U-GCV1105, GCV1105-USED.

Drive spindle that fits distributors on A+ engines only. Used. Ref: 12G3560, U-12G3560, 12G3560-USED.

Good-condition used distributor drive spindle/gear for A-series engines only. Ref: 12G4499, U-12G4499, 12G4499-USED.

Used distributor mounting base/adapter; slides into A-series 850cc, 997cc, 998cc, 1098c or 1275cc blocks. Ref: 12A1136, U-12A1136, 12A1136-USED

Used Lucas 59D series points distributor for A+ blocks. With vacuum advance unit.

Lock control with link for roll-up window doors, as fitted to 1993-on classic Minis; can retrofit all roll-up window doors on U.K. Minis.

Pair of door opening links for roll-up window Innocenti classic Mini. Used condition.

USED Classic Mini Mk3-on right-hand door for cars to 1989; sold as-is. Ref: BMP326, BMP0326.

Used bare drive shafts to accept inner CV joints, typically needed when converting to 1973-on pot joint transmission. Ref: 22A1960, 22A1961, SEVU002, SEVU002R, SEVU002L.

Ring and pinion final drive gears, tooth count 17/64, 3.76 ratio. Used condition, but supplied as a matched set.

Classic Mini 3-synchro flywheel housing; no breather. Used, actual condition may vary from shown

Used Verto flywheel locking key, for classic Mini engines 1982-2000. Ref: DAM5923, U-DAM5923.

Gear selector rod that protrudes through the oil seal at the rear of all rod change gearboxes; used. Ref: 22G1858.

Custom rebuilt kit includes everything you need to convert to a single 1.75'' SU carburetor from twin carbs.

22A250 classic Mini Cooper-type remote shift assembly. Includes shift lever and all associated parts. Used.

Reverse gear for early rod change transmissions, as used from 1973 untill the introduction of the A+ gears.

This handy kit includes two (2) each of the classic Mini's special rocker cover bolt, distance piece, and cup washer; used. Ref: SEVU0025, GEG1140.

Used metal plate at bottom of shift housing. Ref: DAM8621, U-DAM8621, U-DAM8621-USED.

Complete USED shift linkage for the rod-change transmission. Ref: U119, SEVU0006.

Used second gear for late SPi classic Minis, usually from France, with 25 tooth 2nd gear. Ref: DAM6240.

Plate that covers the speedometer drive spindle, on the transmission end housing; used condition. Ref: 2A3626, U-2A3626, 2A3626-USED.

5-tooth metal speedometer drive gear in transmission. Typically used with 3.2 final drive.

Used bracket for front lower stabilizer bar on right-hand side. Ref: NAM3760, U-NAM3760, NAM3760-USED.

Used tappet chest side cover without breather for all classic Mini 850cc-1098cc engines plus Cooper S.

The throttle pedal was slightly revised when the classic Mini got the ''face lift'' in 1976. For right-hand drive cars 1976-on. Used.

Early-style valve stem keeper to fit valves with the wide groove. Used.

Single V-belt pulley type only; can be used as a replacement for the two-piece Cooper 'S' unit. Ref: CAM4929, CAM4929R. CAM4929-REB. SEVUCAM4929

1''-thick vibration dampener front pulley for A-series engines. Ref: C-CAM4929R, CAM4929.

Wing nut with a long sleeve, normally used with classic Mini 1000 or Austin America air filter housings; used