Electrical

Standard coil for use on classic Minis manufactured 1984-on. Ref: DLB102, 45251, GCL217.

As-original coil with screw-on connection for the ignition lead; ideal to use when restoring a Mk1 classic Mini to original condition. Ref: DLB100, GCL110B, 45212.

OEM-quality standard replacement coil, suitable for classic Minis up to 1984. Ref: DLB101, GCL216, GCL110, GCL0110.

This Sports Coil delivers 20,000 volts with 3 OHM resistance. Ref: DLB105, CL105, MSC105.

Ignition rotor for early, 25D4 distributor as used up until 1974. Fits either side-exit or top-exit cap, mechanical or vacuum advance.

Heavy-duty ignition rotor, direct replacement for early-type 25D distributors with either side-exit or top-exit cap. Ref: DRB101, DRB101HD, DRB101SP.

Ignition rotor button to be used on Lucas 45D distributor and 59D distributors originally fitted with points. Ref: DRB104, DRB104HD, DRB133HD.

Ignition rotor for the 45D4 distributor, typically used from 1974 until A-Plus. This can be found in earlier motors, too.

Ignition rotor button for the French-made Ducellier distributor.

Rotor for 59D electronic ignition distributor,including some A+ Metro and single-point injection (SPi) classic Mini. Ref: GRA2143, DRB147, 54403899.

Dashboard-mounted ignition switch with off-on-start positions for most classic Mini Mk1, Mk2, and Mk3 models. Ref: 31799, 13H337, LU31973.

Steering-column mount ignition switch, with column-locking mechanism, including keys. Ref: BHM7107, SSB308.

Chrome spacer as fitted to all 1963-71 classic Mini Cooper S models with the center ignition switch. Ref: 14A1447.

Chrome spacer as fitted to U.K. classic Mini Mokes with the center ignition switch. Ref: SEL0166, MOKE-IGN-SW-COL.

Lock barrel for dash-mounted igntion switch, with two (2) keys. Ref: 24G1345, 54315070.

Dash-mounted ignition switch with off-on function only, for classic Minis with floor-mounted remote starter button. Ref: 34387, 30608, BHA4234.

Universal wire separator kit to keep spark plug wires organized and protected. Set of three (3) sizes.

Electronic ignition conversion for the 25D distributor, negative ground; by Pertronix. Ref: SEL0113, LU-142.

Electronic ignition conversion for the 25D distributor, retaining the original British positive ground system. Pertronix. Ref: LU-142POS, LU-142AP12.

Electronic ignition conversion kit for Lucas 45D distributors with sliding ''red'' points or A+ 59D with ''blue'' points. Ref: LU-143A, LU143A.

Pertronix ''Ignitor II'' electronic ignition conversion kit for Lucas 45D distributors with sliding ''red'' points. Ref: LU-143II.

''Ignitor II'' electronic ignition conversion kit for Lucas 23D and 25d distributors with fixed points; for negative ground cars only. Ref: LU-142II.

Replacement ignitor for 45D4E and 59D4E True Spark distributors only. Ref: 41427EPU.

Chrome retainer ring that pushes into the rubber lamp body of early beehive front indicator lamps. Ref: 7H5182, 572734.

Low-wattage (3W) push-in bulb for instrument illumination. Ref: GLB504, LLB504, GLB2132.

Black plastic instrument gauge mounting pod with chrome trim, for early classic Mini Cooper and Cooper S. Ref: 14A9815, 14A9815T.

Oval plastic gauge housing as found in all classic Minis with three center-mounted gauges. Mk2-on type, which is self-supporting and does not require the metal inner plate. Ref: 24A2702.

Single-gauge mounting pod. Black plastic, as used on 1969-1984 850cc and 998cc Minis. Ref: LGA7548.

Single-gauge mounting pod. ''Old English White'' plastic, as used on 1961-1967 classic Mini and Mini Cooper. Ref: ADA3741.

Instrument/gauge illumination socket and bulb; fits 1/2'' diameter installation tube. Sold each.

Instrument/gauge illumination socket and bulb. Fits 3/8'' diameter installation tube; bulb included. Sold each.

Dome light in the correct style for 70's-80's Minis (before the late recessed type lamp), but will also fit Mk1 models. Ref: EAM1650.

White plastic replacement lens for EAM1650 courtesy lamp. Ref: 24G3389.

Original ''Art Deco''-style interior dome lamp lens for Mk1 and Mk2 classic Minis. Ref: 17H9971.

Aftermarket interior dome lamp as used on Classic Minis 1984-on. Ref: AFU4092.

Polished clip to cover the joint in the 14A9907 oval trim piece on the oval speedometer binnacle. Ref: 24A0472, 24A472.

FS key blank, as used on most door and boot handles, as well as dash-mounted ignition switches. Ref: 17H2475, KEY1.

Key blank for UK-market classic Minis with locking ignition, typically 1976 through the 1980s. Ref: AAU8276A, BHM7107.

Reproduction knob for use with 57H5260 heater switch. Ref: 13H250, 78405-KNOB.

Reproduction of the lamp bar used by the Works rally cars; fits classic Minis 1959-1996. Ref: MSA1101, C-AJJ3329B.

Steel mounting bracket for Wipac fog lamp S6078 or driving lamp S6007. Ref: XBU10045.

Lamp brackets for MPi classic Minis with four (4) front lamps, or for a car being retrofitted with original Rover lamps and brackets. Ref: XBU100640 XBU100650 XBU10044

Rubber seating gasket for under the metal license plate lamp housing as used on Mk3 and later classic Minis. Ref: 13H6010, 54571498.

Oversized, 6-1/2'' diameter driving lights for your classic Mini. These black plastic-backed lamps also fit single- and twin-point injected cars as replacements for the original Rover lamps.

Economical reverse lamp with integral mount; plastic body with clear lens and white reflector. Ref: MSA1116.

Classic Minis built from about 1986 through 1996 used these front signal lenses and push-in side marker lamps.

Clear tail light lens kit; fits all classic Minis with the two-piece lens incorporating a back-up light. Ref: MSSK036.

Late classic Minis (1986-on) used a larger plastic lens on the front panel turn indicator lamps. These are amber as found in many sales markets.