Front Disc

Now made in rustproof stainless steel for longest life, these fit only the early standard Cooper calipers. Sold each, use two per caliper.

Caliper piston to fit 7.5'' classic Mini Cooper S brakes; stainless steel. Ref: SAAS501, SBR0068.

1.4'' piston for AP Lockheed LD 65 Metro caliper. Stainless steel for long life. Ref: SAAS1022, SBR0171, SBR171.

Good-quality reproduction brake caliper seal kit. Includes rubber seals and metal retaining rings for one caliper as found on 1984-on classic Minis (except ERA Turbo). Ref: GRK5008, M2601.

OEM caliper piston seal kit for 1984-on two-piston calipers as used with 8.4'' rotors. Ref: GRK5008, 8G8668, M2601.

Caliper piston seal set for one caliper; piston and transfer seal not included. Ref: GRK5009, M71594, 8G8587.

Kit contains the main caliper seals and rings to rebuild one caliper. Ref: GRK5006, 8G8830, M2604, 51113.

Genuine AP Caparo kit, which contains the main caliper seals and rings to rebuild one caliper. Ref: GRK5006, 8G8830, LK12604, HCK160.

Caliper repair kit for 4-piston Metro Turbo caliper. Includes piston seals, but no pistons or fluid channel seals. Ref: GRK5003, 53249, LK12618.

Pair of 4-pot billet aluminum calipers to fit 7.5'' Cooper S brakes, and fit inside most 10'' wheels. Ref: C-AJJ4023.

Pair of billet aluminum calipers for light weight and improved braking performance. Bolt-on convenience for any Classic Mini with 8.4" rotors.

This kit includes everything necessary to convert any classic Mini from drum to Cooper S front disk brakes. Ref: SBR0059, C-AJJ4028.

Kit includes everything necessary to convert any classic Mini (1959-2000) from drum to Cooper S front disc brakes. Ref: C-AJJ4028MS, C-AJJ4028, SBR0059E.

This is the larger copper sealing washer of the two commonly used in the brake/clutch plumbing. Ref: 3H550, 3H0550.

One each upper and lower stamped metal dust shield for 8.4'' disk used on classic Minis after 1984; left-hand side. Ref: HMP441033, MSSK1403, 21A2617, 21A2618.

Upper and lower stamped metal dust shield for 8.4'' disks as fitted after 1984; right-hand side. Ref: HMP441032, MSSK1402, 21A2613, 21A2614.

Aluminum alloy disc brake hubs for use with 8.4" or larger brakes. Manufactured from cast L155 aero-grade aluminum and CNC machined within KAD’s in-house facilities, these hubs are made to

Metro vented disc type drive flange, made without the original Metro wheel centralizing lugs. Ref: NAM6450F, NAM6028.

Brake dust shield bracket to steering arm on disc brake cars; choose right- or left-hand side.

Pressed metal disc lower brake shields for 7.5'' Cooper S setup; choose right- or left-hand side. Ref: 21A1271, 21A1272.

Pressed metal upper disc brake shield for 7.5'' Cooper S setup; choose right- or left-hand side. Ref: 21A1273, 21A1274.

Seal for original 2-piston brake caliper as fitted to all classic Minis (exc. ERA Turbo) after 1984. Ref: 17H7679.

This is the small seal found between the caliper halves that should be replaced every time the caliper is dismantled. Ref: 17H8764.

Replacement caliper internal fluid channel seal for aftermarket 4-piston calipers. Sold each.

Genuine KAD slotted and vented brake rotors; 7.9'' size to suit selected 10'' and all larger wheels. Ref: 1013261, KAD1013261.

Genuine KAD drilled and vented brake rotors in 8.4'' size to suit 12''-13'' wheels.

Screw used to hold together the two halves of the disc shields on all classic Mini front discs, as well as retaining the boot lid cable to the bootlid, and used on various door handles and door remote link.

Short Pozidrive head screw used to retain the front drum and standard rear drum to the drive flange or rear hub. Ref: CMZ407, HDWS288, DS1X100.

Pozidrive (not Phillips) head screw to fasten the flange to the classic Mini Cooper S brake disk. Ref: SF604061, HDWS293.

Disc brake hub in latest design, replaces earlier casting. Fits all disc brake-equipped classic Minis. Ref: FAM2391, BTA187.

Disc brake swivel hub in newest design, replaces earlier casting. For all disc brake equipped classic Minis. Ref: FAM2390, BTA186.

Improved-design tapered CV nut collar, made from EN24 steel. Made in the U.K. Ref: FOR130, KAD-SS-CVTW.

Common wheel stud as used on front and rear of drum brake classic Minis, and front of Cooper and Cooper S. Ref: 21A2064, BTA339, NAM5645.

Longer-than-standard wheel stud often used with non-standard wheels or when spacers are used. Ref: 21A2064L, ATA7085.