Brakes

Premium 1.25''-wide shoes for rear drums on all classic Minis, made by Mintex Ref: GBS0701, GBS834AF, BBS6247.

1.5''-wide shoes for front of twin-leading shoe brakes. Ref: GBS102MS, GBS733, GBS102.

Mintex 1.5'' wide brake shoes for front of classic Minis equipped with twin-leading shoe brakes. Ref: GBS733, GBS0733AF, MBS6, BS525.

The bushing inside the pivot eye of the brake pedal can wear, leading to sloppy brake action. Ref: 2A3034.

Caliper mounting bolts used on classic Minis with 7.5'' Cooper S or 8.4'' disc brakes. Ref: 53K1048, HDWB291.

Correct-length bolt for use with aluminum 4-pot brake caliper. Ref: 53K1049.

Single brake caliper piston for 8.4'' solid rotor caliper introduced in 1984. Stainless steel. Ref: 114713, 17H7960.

Now made in rustproof stainless steel for longest life, these fit only the early standard Cooper calipers. Sold each, use two per caliper.

Caliper piston to fit 7.5'' classic Mini Cooper S brakes; stainless steel. Ref: SAAS501, SBR0068.

1.4'' piston for AP Lockheed LD 65 Metro caliper. Stainless steel for long life. Ref: SAAS1022, SBR0171, SBR171.

Good-quality reproduction brake caliper seal kit. Includes rubber seals and metal retaining rings for one caliper as found on 1984-on classic Minis (except ERA Turbo). Ref: GRK5008, M2601.

OEM caliper piston seal kit for 1984-on two-piston calipers as used with 8.4'' rotors. Ref: GRK5008, 8G8668, M2601.

Caliper piston seal set for one caliper; piston and transfer seal not included. Ref: GRK5009, M71594, 8G8587.

Kit contains the main caliper seals and rings to rebuild one caliper. Ref: GRK5006, 8G8830, M2604, 51113.

Genuine AP Caparo kit, which contains the main caliper seals and rings to rebuild one caliper. Ref: GRK5006, 8G8830, LK12604, HCK160.

Caliper repair kit for 4-piston Metro Turbo caliper. Includes piston seals, but no pistons or fluid channel seals. Ref: GRK5003, 53249, LK12618.

Pair of 4-pot billet aluminum calipers to fit 7.5'' Cooper S brakes, and fit inside most 10'' wheels. Ref: C-AJJ4023.

Pair of billet aluminum calipers for light weight and improved braking performance. Bolt-on convenience for any Classic Mini with 8.4" rotors.

Large-diameter cap for early tandem brake master cylinders as fitted to Canadian (classic) Minis, Austin Americas, or classic Minis converted to dual-circuit systems. Ref: AAU3815, GMC159, GMC160.

Plastic cap fits all classic Mini clutch master cylinders and single-line brake master cylinder. Ref: 513123A, 17H6861, 513123.

One-way check valve in the vacuum hose to maintain suction on the diaphragm. Ref: 17H2646, LBEAC9030AP, LV15069.

Clevis pin with nylon bushing to fit the brake pedal on 1989 and later classic Minis with the horizontal brake master cylinder.

Clevis pin to connect the master cylinder pushrod to the pedal; works for brake or clutch. Ref: CLZ512, CLZ0512.

Special clip used to secure the brake pipe that crosses the front of the front subframe. Ref: 11K9181, KYC100070.

This kit includes everything necessary to convert any classic Mini from drum to Cooper S front disk brakes. Ref: SBR0059, C-AJJ4028.

Kit includes everything necessary to convert any classic Mini (1959-2000) from drum to Cooper S front disc brakes. Ref: C-AJJ4028MS, C-AJJ4028, SBR0059E.

This is the larger copper sealing washer of the two commonly used in the brake/clutch plumbing. Ref: 3H550, 3H0550.

One each upper and lower stamped metal dust shield for 8.4'' disk used on classic Minis after 1984; left-hand side. Ref: HMP441033, MSSK1403, 21A2617, 21A2618.

Upper and lower stamped metal dust shield for 8.4'' disks as fitted after 1984; right-hand side. Ref: HMP441032, MSSK1402, 21A2613, 21A2614.

Aluminum alloy disc brake hubs for use with 8.4" or larger brakes. Manufactured from cast L155 aero-grade aluminum and CNC machined within KAD’s in-house facilities, these hubs are made to

Metro vented disc type drive flange, made without the original Metro wheel centralizing lugs. Ref: NAM6450F, NAM6028.

Brake dust shield bracket to steering arm on disc brake cars; choose right- or left-hand side.

Pressed metal disc lower brake shields for 7.5'' Cooper S setup; choose right- or left-hand side. Ref: 21A1271, 21A1272.

Pressed metal upper disc brake shield for 7.5'' Cooper S setup; choose right- or left-hand side. Ref: 21A1273, 21A1274.

Cap with integrated fluid level switch; replaces the earlier cap used on late brake master cylinders GMC227 and GMC242. Ref: GRK6009, CDU3161EVA.

Filler cap for dual brake master cylinder with rectangular tank, prior to addition of fluid level switch in the cap. Will also replace the cap with the fluid level warning switch. Ref: AAU8240, GRK907014, STW000010.

Seal for original 2-piston brake caliper as fitted to all classic Minis (exc. ERA Turbo) after 1984. Ref: 17H7679.

This is the small seal found between the caliper halves that should be replaced every time the caliper is dismantled. Ref: 17H8764.

Revised handbrake pawl that allows the handbrake to be yanked and instantly released to aid in tight handbrake-assisted turns.

Foam rubber gasket used under the metal master cylinder/heater hose metal plate on top of the bulkhead. Ref: ALA6598, NAM9197.

Paper gasket under flange of master cylinder on the firewall shelf. Ref: 31G279, 31G0279.

This leather handbrake boot will suit all classic Mini models; attaches to the carpet with Velcro stitched to the underside. Special order, lead time may be required.

Vinyl handbrake boot to over the handbrake lever in any classic Mini. Attaches to the carpet with "Velcro" type hook-and-loop closure

Vinyl handbrake boot fits over the handbrake lever in any Mini. Attaches to the carpet with "Velcro" type hook-and-loop closure

Vinyl handbrake boot fits over the handbrake lever in any classic Mini. Attaches to the carpet with "Velcro" type hook-and-loop closure.

Locks the adjustment nut on the forward cable of 1976-on classic Minis with single-cable systems. Ref: 31G5049.

Classic Minis to 1976 used two cables from the lever to the rear; two (2) of these springs are used at the adjustment end of the cables. Ref: ACH8508.

Left-hand side sheet metal bracket on the rear backing plate to align the handbrake cable. Ref: 21A1670.