Brakes

Disc brake hose with a reinforcing sleeve on the inner end. Ref: GBH249, GBH174, BH265, GBH0249E.

OE-style front disc brake hose with a reinforced inner end. Ref: GBH249, GBH174, GBH1056, GBH0249.

Front brake hose for classic Mini drum brakes. Ref: GBH170E, GBH170, BH209.

Front rubber flex hose from subframe to caliper for the MG1100 (only). Ref: GBH106, BFH1118, LH1707, GBH0106.

Rubber flex hose from the rear subframe to the trailing arm; as used on all classic Minis. Ref: GBH250, BH211.

Rear brake flex hose from the subframe to the rear swing arm, used on MG1100 and Austin America. Ref: GBH179, BFH1120, GBH0179.

Mechanical brake light switch that mounts on the pedal box and operates via the brake pedal; for classic Minis 1976-on. Ref: 13H3735, 34933.

Beginning in 1976, the brake pressure switch was fitted to the pedal box location. Ref: 13H3735, 13H3735HD, SMB421MINI.

The pressure of the brake fluid activates this switch, which screws into a fitting on the front subframe at the right side. Ref: C16062, SPB400, C16062A, 51600, XBLS7.

Brake fluid pressure activates this switch, which screws into the banjo fitting on the front subframe on the right side. Ref: C16062, C16062HD, SMB423, C16062A.

Pair of flexible braided steel lines with fittings to replace the solid steel lines between the horizontal brake master cylinder and the junction. Ref: SEN45.

Most original brake masters using the early cup seal have by now been replaced with the ring seal design as found in this kit. Ref: GRK1006, BAU1247.

Brake master cylinder rebuild kit for the single-line brake master cylinder. Ref: GRK1028, 8G8689, 50957.

Rebuild kit for 0.75'' bore brake master cylinder. Ref: GRK1026, 50639, 8G8258, KL71535.

In 1989, a direct-acting servo with master cylinder was fitted to the classic Mini; kit repairs the cylinder only. Ref: GRK1032, LK11414, SSB1414, 55390.

Brake master cylinder repair kit for five different classic Mini master cylinders, as used from 1979 to May 1985

Repair kit for the GMC167 brake master cylinder, as used from 1975 to 1980. Ref: GRK1002, LK11237, SSB1237, HMK142.

Reproduction of the repair kit required by the earliest tandem master cylinders used on the classic Mini. Ref: GRK1019, 18G9063, LSSB927, LK10927.

OE version of the repair kit required by the earliest tandem master cylinders used on the classic Mini. Ref: GRK1019, GRK1019-OE, LSSB927.

This repair kit fits the stepped-bore GMC227 brake master cylinder that was original equipment on all classic Minis from May 1985-on. Ref: GRK1035, BAU5656EVA, LK11408, HMK143.

OE version of the most commonly-used master cylinder for single line (not tandem) systems, with .70'' bore size. Ref: GMC171, L4222-992, LM12997.

Original-style master cylinder for single line brake systems; metal ''bean can'' reservoir with plastic cap. Ref: GMC171, GMC171ORIGINAL, GMC171OE, GMC171-OE.

Correct replacement master cylinder for classic Minis with diagonal split dual braking system, as used from the end of 1975 through 1980. Ref: GMC167, 4222-171, GMC0167.

Horizontal-style hydraulic brake master cylinder that mounts to the servo-assist unit fitted from 1989-on; OEM version. Ref: GMC242, GMC90376, LM15324, MAP5324.

Restoration-quality classic Mini Cooper S brake master cylinder, with plated-finish metal tank. Ref: GMC172, GMC172OE/HTG, GMC172-OE.

Aftermarket version of the most commonly-used master cylinder for single line (not tandem) brake systems. Ref: GMC171, PMA710, GMC191.

Stepped-bore tandem brake master cylinder, replaces most rectangular reservoir master cylinders used from Sept. 1978 until the horizontal master was fitted in 1989. Ref: GMC227, GMC0227E.

Stepped-bore tandem brake master cylinder, replaces those used from Sep. 1978 (rectangular reservoir) until the combined servo-master was fitted in 1989. Ref: GMC227, LM15121.

Set of four (4) long retaining pins to secure the pads in all classic Minis with 8.4'' brakes or alloy calipers. Ref: GBK1010, PS610241, LHK1.

Brake pad retaining pin for 7'' classic Mini Cooper or 7.5'' classic Mini Cooper S brakes. Ref: PS610240.

Correct brake pad cotter pin for use on classic Minis equipped with vented rotors. Sold each.

Retainer spring for 8.4'' disc brake pads. One (1) required per wheel. Ref: 17H7963, LPK58.

Standard road material Mintex brake pad set for 4-pot calipers. Ref: GBP258, GBP258AF, GBP258M, GBP0258M, MLB81.

Standard road-material brake pads that fit 8.4'' solid rotor brake as used on 1984-2000 classic Minis. Ref: GBP281, GBP281E.

Standard brake pads for the classic Mini's larger cousin, the Austin America. Ref: GBP106, GBP106AF, MDP31, ADO16PADS.

Standard brake pad set for any classic Mini equipped with 7.5'' Cooper S front disc brakes. Ref: GBP103, GBP103E.

OEM-spec Mintex brake pads for any classic Mini equipped with 7.5'' front disc brakes. Ref: GBP103, GBP103MS, GBP103AF.

Brake pad set for 4-pot aluminum or cast iron Metro calipers in popular EBC ''Green Stuff'' material. Ref: C-8G8994KEVLAR, 1012035, C-8G8994.

EBC Ultimax Black Stuff pads are the first step up from road pads. For original and aftermarket 4-piston caliper conversions.

Mintex M1144 brake pad set, formulated for Fast Road, Autocross, and Light Circuit use. Ref: C-8G8994, MLB65, M1144.

EBC's low-dust Kevlar compound for use on 8.4'' discs. The Black Stuff material is the first upgrade for street performance use. Ref: GBP281KEVLAR, GBP281ULTIMAX.

EBC brakes use Dupont Kevlar for the ''Green Stuff'' friction material. Great stopping, minimal dust and superior fade resistance; ideal for hard street to autocross applications. Ref: C-AHT16GREEN, GBP281GREEN.

Mintex M1144 compound brake pads, a commonly-used competition replacement for asbestos-containing DS11. Ref: C-AHT16, MLB37.

Set of four (4) Mintex brake pads for 8.4'' solid rotor brakes. Standard road material. Ref: GBP281M, GBP0281M, MLB37.

Asbestos-free OEM front disc brake pads for 8.4'' front disc classic Minis 1984-2000. Ref: GBP307AF, GBP281MS, GBP90307AF, GBP0307AF.

Heavy-duty road performance EBC Kevlar Green Stuff Roadsport material brake pads for 7'' 998 classic Mini Cooper disc brakes. Ref: C-AHT223KEVLAR, C-AHT223GREEN, GBP102GREEN.

These EBC Ultimax brake pads are a modern option for the 998 Mini Cooper. They are made in the U.K., of Dupont Aramid fiber. Slotted and chamfered for low noise.

Mintex C-TECH brake pads are produced from advanced friction materials, formulated to meet the exacting standards. The M1144 compond is designed for Fast Road, Light Circuit and Rally use. Operating